在博航嵌入式购买了个tiny6410板子，底板是Tiny6410SDK 1103，核心板是Tiny6410 1049 ，DDR 是K4X1G163PE *2，NAND是K9F2G08U0B，LINUX、UBUNTU、CE都正常，就只有ANDROID出问题，从SD卡启动能进入系统，但是所有APK都不能使用，从SD卡将内核文件系统烧写到内存，不能启动。。谁能给个解释啊？怎么回事？！我已经试过自己编译内核、打包文件系统，就差没自己从新编译一下文件系统了。。。。

串口信息如下：
PPP generic driver version 2.4.2 architecture 1 part 20 variant
PPP Deflate Compression module registered entries
USB Serial support register
s3c-
PPP BSD Compression module registeredto 2000-01-04 19:10:00 UTC (947013000
dm9000 Ethernet Driver, V1.31w interface driver digi_accel
eth0: dm9000a at d0814000,d0c00004 IRQ 108 MAC: 08:90:00:a0:90:90 (platform datas: dev is 32505858 name is "mtdblock2" rwl Converter driveretected              
)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Drivertouchscreen OKport registered for
FAT: utf8 is not a
s3c2410-ohci s3c2410-ohci: S3C24XX OHCIms, filesystem will bUSB Serial support
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1sitive!                

[04/Jan/2000:11:10:01 +0000] boa: server versio
s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000            
USB Se
[04/Jan/2000:11:10:01 +0000] bo
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001registered new interface driver io_              
          
s3c_pp_ioct
usbcore: registered new interface driver usbserialort registered for empeg      
RET_DEC_PIC_SUCCESS
USB Serial support registered for genericrface driver empegUSB Se      
gspca: mai
usbcore: registered new interface driver usbserial_genericout                                      
USB Ser
RET_DEC_
usbserial: USB Serial Driver coreCESS) value is 0spcp8x5te        
USB Serial support registered for aircables3c_pp_ioctl: Waiting for interrupt is tim
usbcore: registered new interface driver ai      

                                
garmin_gps: v0.33
Loading ker
belkin_sa: v1.3:USB Belkin Serial converter driverl support r
Start Linux kernel...erface driver mar
USB Serial support registered for ch341-uart kernel.river hp4X                          
usbcore: registered new interface driver ch341neric Serial driverDriver
Linux version 2.6.3
USB Serial support registered for cp210x4.5.1 (ctng-1.8.1-FAC PDAadted 0x8bc536e
usbcore: registered new interface driver cp210xred new inte
) ) #3 PREEMPT Wed Feb 16 18:38:53
cypress_m8: v1.10:Cypress USB to Serial Driver6t adapter: registeredport module. suppor    
USB Serial support registered for debugs 266000000for Keyspan 2 port adapter  
usbcore: registered new interface driver debugll (0), rate is 84666666rt registered for Keys
USB Serial support registered for Digi 2 port USB adapter(0), rate is 84666666ore: registered new interface driver
USB Serial support registered for Digi 4 port USB adapter4666666 v1.1.5:Keyspan USB to Serial Converter Drivered n
usbcore: registered new interface driver digi_acceleportrial support registered for Keyspan PDA          
uclk1
digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driverhci and addr
spi-bus: source is mout_epll (0), rate is 84666666: registered ne
USB Serial support registered for Edgeport 2 port adaptert_epll (0), rate is 84666666                            
USB Serial support registered for Edgeport 4 port adapterrate is 84666666 PGS - (pr                  
Download yaf
Downl    
s3c-hso      
one_wire_statu
usbcore: registered new interface driver io_edgeport666nectegisteredeo_memory: dma=5d7b                
io_edgeport: v2.7:Edgeport USB Serial Driverace driver kl5kusb105d50
s3c64xx: 4194304 by
USB Serial support registered for Edgeport TI 1 port adapter05 chipset USB->Serial Converter driver
s3c64xx: 4194304 by
USB Serial support registered for Edgeport TI 2 port adapterupport registered for KOBIL USB smart ca
s3c64xx: 16777216 b
usbcore: registered new interface driver io_ti      
usbcore: registered new interface driv
io_ti: v0.7mode043006:Edgeport USB Serial Driverity grouping on.  Total pages: 65024B Smart Card
USB Serial support registered for empego_memory: dma        
Kernel command l
usbcore: registered new interface driver empegststered for MCT U232                        
Memory: 227840k/227840k availa
usbcore: registered new interface driver garmin_gpser zc3xx00002a00) (gcc version 4.5.1 (ct
u
Virtual
garmin_gps: v0.33:garmin gps driver40            
    vector  : 0xffff
USB Serial support registered for hp4Xstered for moto-modem
s3c6400-uart.1:
usbcore: registered new interface driver hp4X6 kB) interface dr                          
USB Serial support registered for IPWireless converter  .init : 0xc0008000 - 0xc0165000   (1396 kB)verhsotg:
usbcore: registered new interface driver ipwttytext : 0xc0165000 - 0xc063c000   (4956 kB)  
C
ipw: v0.4:IPWireless tty driversbcore: regi
      .data : 0xc0
USB Serial support registered for IR Dongle                    
USB Serial supp
SLUB:
usbcore: registered new interface driver ir-usb, CPUs=1, Nodes=1                
usbcore: reg
ir_usb: v0.5:USB IR Dongle drivernawc: v
Hierarchical RCU implemen
USB Serial support registered for iuu_phoenix  RCU-based detection of stalled CPUs is disa
usbcore: registered new interface dror                      
        
s3c64xx_dma_init: Registering DMA channelsd bus num          
USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)                            
USB Serial s
s3c64xx_dma_init1: registering D
usbcore: registered new interface driver keyspan_pda: Product
s3c64xx_dma_init1: registering DMA 2 (d080
keyspan_pda: v1.1:USB Keyspan PDA Converter driver
s3c64xx_dma_init1: registering DMA 3 (d0808160)s
USB Serial support registered for KL5KUSB105D / PalmConnectnit1: registering DMA 4 (d0808180)                  
S
Dri
usbcore: registered new interface driver kl5kusb105d DMA 5 (d08081a0)ion 0.1 09/26/2005 Thomas Hergenhah
kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver                                
USB
s3c64xx_dma_init1: registering
USB Serial support registered for KOBIL USB smart card terminalPL080: IRQ 73, at d0808000interface driver sierra  
s3c64xx_dm
usbcore: re
usbcore: registered new interface driver mos7840rface driver ti_usb_34
s3c-i2c s3c2440-i2c: slav
USB Serial support registered for moto-modem_3410_50
s3c-i2c s3c2440-i2c: bus frequency
usbcore: registered new interface driver moto-modem3c-sdh
US
s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapt
USB Serial support registered for navman    
Advanced Linux Sound Architecture D
usbcore: registered new interface driver navmaned new i                    
Bluetooth: Core v
USB Serial support registered for ZyXEL - omni.net lcd plus usb31hci s3c-sdhci.1: clock s
usbcore:
Bluetooth: HCI device and
usbcore: registered new interface driver omninet      
visor: USB HandSpring Visor /
Bluetooth:
omninet: v1.1:USB ZyXEL omni.net LCD PLUS DriverUSB Serial support
Switching to clocksource clo
USB Serial support registered for opticon 1007): do        
NET: Registered protoc
usbcore: registered new int                
        
S3C_LCD cl
usbcore: registered new interface driver safe_serial              

LCD TYPE :: N43 will be initialize
USB Serial support registered for siemens_mpi - FB1: map_video_memory: clear ff600000:0007
usbcore: registered new interface driver siemens_mpi DCFG=0x0
            FB1: map_video_memory: dma=5e3
Driver for Siemens USB/MPI adapter                                  
Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net clear ff63fc00:0003fc00                  
s3c-hsotg s3c-hsotg: GRXFSIZ
usb 1-1: New USB device found, idVendor=05e3, idProduct=0606pu=ff63fc00 size=0003fc00        
s3c-hsotg s3c-hsotg: DPTx[
usb 1-1: New USB device strings: Mfr=1, Product=2, Sering to colour frame              
                  
Flash:   0 kB
usbcore: registered new interface driver spcp8x5r devicex00002100        
Out:     ser
backlight
spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver0-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq =
USB Serial support registered for Quatech SSU-100 USB to Serial Driverze=768, StAddr=0x000027000
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7
usbcore: registered new interface driver ssu100=768, StAddr=0x00                              
s3c6400-uart.3: s3c2410_
usbcore: registered new interface driver symbol00/102
s3c-hsotg s3c-hsotg: DPTx[13] FSize=768,
USB Serial support registered for TI USB 3410 1 port adapter            
pmem: 1 inits3c-hsotg: D
S3C NAND Driver, (c)
USB Serial support registered for TI USB 5052 2 port adaptersbcore:
S3C NAND Driver is using hardware ECC.=768, StAddr=
usbcore: registered new interface driver ti_usb_3410_5052ec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bi00008000,
ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driverceleport: v1.80.
t):D
Creating 3 MTD partitions on "NA
USB Serial support registered for Handspring Visor / Palm OS0, DMA=0x000000
0x000000000000-0x000000080000 : "Bootloader"
USB Serial support registered for Sony Clie 3.500000080000-0x000000580000 : "Kernel"Z=0x000000
USB Serial support registered for                                
usbcore: registered new interface driver zioor: ubi_io_read: error -74 (ECC error) while
Initializing USB Mass Storage driver...), rate is 24000000      
s3c-hsotg s3
usbcore: registered new interface driver usb-storageMA=0x00000000ate
UBI warning: check_what_we_have: 17
USB Mass Storage support registered. s
s3c-hsotg s3c-hsotg: ep6-in: EPCT
s3c-hsotg s3c-hsotg: regs d0880000, irq 9011 12 13 14 15 16 17 18 19 20 21 22 23 24_
s3c-hsotg s3c-hsotg: GRXFSIZ=0x00001800, GNPTXFSIZ=0x18001800out: EPCTL=0x000
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
s3c-hsotg s3c-hsotg: shared fifos51ace driver garmin_gpse d
irda-b
s3c-hsotg s3c-hsotg: DCFG=0x00200000, DCTL=0x00000002, DIEPMSK=0000000f59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 7            
s3c-hsotg s3c-hsotg: GAHBCFG=0x00000000, 0x44=0x0000000000000, SIZ
8 79 80 81 82 83 84 85 86 87 88 89 90 91 92 9
s3c-hsotg s3c-hsotg: GRXFSIZ=0x00000800, GNPTXFSIZ=0x04000800c-hsotg s3c-hsotg: ep8-in: EPCTL=0x0000000          
      
s3c-hsotg s3c-hsotg: DPTx[5] FSize=768, StAddr=0x00001b0072 174 175 176 178 179 180 181 182 183 184 1852 init=/lin
s3c-hsotg s3c-hsotg: DPTx[6] FSize=768, StAddr=0x00001e00otg s3c-hso
186 187 188 189 190 191 192 193 194 195 196
s3c-hsotg s3c-hsotg: DPTx[7] FSize=768, StAddr=0x00002100s)                                  
s3c-hsotg s3c-hsotg
s3c-hsotg s3c-hsotg: DPTx[8] FSize=768, StAddr=0x00002400220 221 222 223 224 225gistered new interface driver ir-u
s3c-hsotg s3c-hsotg: DPTx[9] FSize=768, StAddr=0x000                                                  
s3c-hsotg s3c-hsotg: DPTx[13] FSize=768, StAddr=0x00003300_phoenixerface driver ov519
    DMA     : 0xff600000 - 0xf
s3c-hsotg s3c-hsotg: DPTx[14] FSize=768, StAddr=0x000036006 297 298 299 300 301 302 303 304 3050xe0000000   ( 248 MB
s3c-hsotg s3c-hsotg: DPTx[15] FSize=768, StAddr=0x00003900
306 307 308 309 310 311 312 313 314 315 316 317 318 319
s3c-hsotg s3c-hsotg: ep0-in: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000 MB)    
s3c-hsotg s3c-h
326 327 328 329 330 331 332 333 334 335 336 337 33
s3c-hsotg s3c-hsotg: ep0-out: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000   .text : 0
s3c-hsotg s3c-hso
                                              
usbcore: registered new interface driver pvrusb2: R
s3c-hsotg s3c-hsotg: ep5-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000504 505WinTV-PVR-USB2 MPEG2 Encoder/Tuner interface driver kobilnterf
s3c64xx
s3c-hsotg s3c-hsotg: ep5-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 523 524 52564xx_dma_in
SE401 usb camera driver version 0.24 registeringL USB
s3c-hsotg s3c-hsotg: ep6-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x000000001 542 543 544 545                        
s3c64xx_dma_in
one_wire_status: 4A
s3c-hsotg s3c-hsotg: ep6-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000060 561 562 563 564 565808180) Seria
zr364xx: Zoran 364xxfor MCT U232): ubifs
u
s3c-hsotg s3c-hsotg: ep7-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000579 580 581 582 583 584 585Philips webcam module version 10.0.13 loaded.    
s3c-hsotg s3c-hsotg: ep7-out: EPCTL=0x000000                                          
s3c-hsotg s3c-hsotg: ep11-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000051rface driver usbfs                            
cpia1: registered
usbcore: reg
s3c-hsotg s3c-hsotg: ep12-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 755e: registered
etoms: registeredusb7            
usbcore: registered new
s3c-hsotg s3c-hsotg: ep12-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000774 775teredc2440-i2c: bus freq
usbcore: registered new interface driver jeilin
s3c-hsotg s3c-hsotg: ep13-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000093 794 795usbcore: registered new interface driver marsecture Driver Version 1
s3c-hsotg s3c-hsotg: ep13-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x000000002 813 814 815ver mr97310a      
USB Serial suppo
IP route cache hash tabl
one_
s3c-hsotg s3c-hsotg: ep14-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 832 833 834 835 interface driver ov519able entries: 8192 (order: 4, 65536 byt
android_bind 890 891 892
android_usb gadget: android_usb readye driver pac7302ncoder Driver init OK
s3c-hsotg s3c-hsotg: new device is full-speed 903 904 905 906 907 908 909 910 911 912 913
s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRstcs                    
RPC:
pac7311: reg
s3c-hsotg s3c-hsotg: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000 932 933 934 935 new interface driver sn9c2028.                  
s3c-hsotg s3c-hsotg: DCTL=0x0000000237 938 939 940 941 942 943 944 945 9
s3c-hsotg s3c-hsotg: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000 registered for
squashfs: v
sn9c20x: registered31)
              
s3c-hsotg s3c-hsotg: S                    
android_usb gadget: Mass Storage Function, version: 2009/09/111021 1022 1023 1024 1025 1026 1027 102erface driver spca505lea
android_usb gadget: Number of LUNs=1  
UBIF
one_wire_s
8 1029 1030 1031
lun0: LUN: removable file: (no medium) 1040 1041 1042 1043 104ered new interf
adb_bind_config06ng ADMAad pag
mice: PS/2 mouse device common for all mice46 1047 1048 1049 1050 1051 1052 1053 1054
input: gpio-keys as /devices/platform/gpio-keys/input/input0eria
fb0: s3cfb frame b
spca508: registeredor /
            
S3C Touchscreen driver,                    
ts-if   initialized1098 1099 1100 1101
S3C24XX RTC, (c) 2004,2006 Simtec Electronicsegistered new interface driver sq905c03fc00  
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling113 1114 1115 1116 1117 1118 1119 1120 1121 11
using rtc device, s3c, for alarmsstered new interface driver sq930
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc030 1131 1132 1133 1134 1135 1136 1137 1138 1139 114 n
Linux video capture interface: v2.00f680000 size=0003fc00              
s3c-fimc: controller 0 registered successfully 1149 1150 1151 1152 1153 1154 1155 115014eCon
s3c-fimc: controller 1 registered successfully014: registered clear ff78
                  
S3C JPEG Driver, (c) 2007 Samsung Electronics
8 1189 1190 1191 1192 1193 1194 1195 1196 11
s3c-g2d: Driver loaded succesfully0                  
s3c64
vc032x:
s3c-g2d: Module initialized.usbcore: registere
4 1205 12
s3c-g3d: detected FIMG-3DSE version 1.5.0 1215 1216 1217 1218 1219 122 registered
s3c-g3d: Driver loaded succesfullyd new interface driver ALi m5602

s3c-g3d: Module initialized.26 1227 1228 1229 1230 1231
Bluetooth: HCI UART driver ver 2.2usbcore: registered new interface
Bluetooth: HCI H4 protocol initialized37 1238 1239 1240 1241 1242 1243 1244
Bluetooth: HCILL protocol initializeddriver startup - version 0.9d103 at M
Bluetooth: Generic Bluetooth USB driver ver 0.6                                              
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)293 1294 1295 1296 1297 1298 1299 130nica Webcam driver8-bi
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz) 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 131
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (84666666 Hz)Kernel"PTXFSIZ=0x04000800913, error -11
6 1317 1318 1319 132
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA  
i
[04/
s3c-fimc: controller 0 registered successfully      
one_wire_status: 41334 1335 1336 133
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)
PPP BSD Compression module register
FIMC Driver, 2010 port
s3c6400_setup_sdhci_cfg_card: CTRL 2=                                    
logger: created 64K log 'log_radio'008000, SIZ=0x000000
s3c2410-ohci s
logger: created 64K log 'log_system'415 1416 1417 1418 1419 1420 1421 14
asoc: AC97 HiFi <-> s3c-ac97 mapping oker, (c) 2008 Samsung Electronicsct=0001
s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=000080803 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 144 S
mmc0: new SD card at address d8cfsung Electronics                
mmcblk0: mmc0:d8cf SD02G 1.84 GiB                                
usb usb1: SerialNumber:
ALSA device list:all
0 1461 1462 1
  #0: MINI6410 (WM9713)1468 1469 1470 1471 147
TCP cubic registered: Donerts detected  
NET: Registered protocol family 179 Samsung Electronicsrfa
6 1477 14
Bluetooth: L2CAP ver 2.154 1485 1486 1487 1488 148
Bluetooth: L2CAP socket layer initializedS3C G3D Init : Done574:13800e_s        
u
Bluetooth: SCO (Voice Link) ver 0.6497 1498 1499 1500 1501 1502 1503 1
Bluetooth: SCO socket layer initializedss driver (v0.1.0)serial: USB Serial Dr
Bluetooth: RFCOMM TTY layer initialized 1512 1513 1514 1515 1516 1517 1518 151
Bluetooth: RFCOMM socket layer initialized_status: 4ore: registered ne
s3c2410-wdt s
one_wire_status: 2g inac
5 1526 1527
Bluetooth: RFCOMM ver 1.11533 1534 1535 1536 1537 15
Bluetooth: BNEP (Ethernet Emulation) ver 1.3: Secure Digital Host Controller Interface d
Bluetooth: HIDP (Human Interface                                
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will b0] us
9 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 16
e case sensitive!  
Dentry cache

EXT3-fs: barriers not enabledource 0: hsmmc (13300
5 1606
init: cannot open '/initlogo.rle'
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instea
d.
enabling adb
adb_open
/ # warning: `rild' uses 32-bit capabilities (legacy support in use)
Compat-wireless backport release: compat-wireless-2011-01-06
Backport based on linux-next.git next-20110111
cfg80211: Calling CRDA to update world regulatory domain
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
usbcore: registered new interface driver ath9k_hif_usb
usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver rt2800usb
usbcore: registered new interface driver zd1211rw
request_suspend_state: wakeup (3->0) at 50403551112 (2010-03-11 10:24:46.1407749
77 UTC)
binder: release 1338:1338 transaction 2104 out, still active
binder: 1106:1113 transaction failed 29189, size 4-0
binder: send failed reply for transaction 2104, target dead
binder: release 1357:1357 transaction 2175 out, still active
binder: 1106:1112 transaction failed 29189, size 4-0
binder: send failed reply for transaction 2175, target dead

配置信息如下：
#This line cannot be removed. by FriendlyARM(www.arm9.net)

CheckOneButton=No
Action=Run
OS= Android

VerifyNandWrite=No

StatusType = Beeper| LED

#################### Linux #####################
Linux-BootLoader = Linux/u-boot_nand-ram256.bin
Linux-Kernel = Linux/zImage_n43
Linux-CommandLine = root=/dev/mtdblock2 rootfstype=yaffs2 init=/linuxrc console=ttySAC0,115200
Linux-RootFs-InstallImage = linux/rootfs_qtopia_qt4.img
Linux-RootFs-RunImage = linux/rootfs_qtopia_qt4.ext3

################### WindowsCE6 #################
WindowsCE6-Bootloader= WindowsCE6\NBOOT_N43-RAM256.nb0
WindowsCE6-BootLogo = WindowsCE6\bootlogo.bmp
WindowsCE6-InstallImage = WindowsCE6\NK_N43-i.bin
WindowsCE6-RunImage = WindowsCE6\NK_N43-i.bin

################### Android ####################
Android-BootLoader = Android/u-boot_nand-ram256.bin
Android-Kernel = Android/azImage_n43
Android-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs  init=/linuxrc console=ttySAC0,115200 androidboot.console=s3c2410_serial0
Android-RootFs-InstallImage = Android/rootfs_android.ubi
Android-RootFs-RunImage = Android/rootfs_android.ext3

################### Ubuntu #####################
Ubuntu-BootLoader = Ubuntu/u-boot_nand-ram256.bin
Ubuntu-Kernel = Ubuntu/uzImage_n43
Ubuntu-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs  init=/linuxrc console=ttySAC0,115200
Ubuntu-RootFs-InstallImage = Ubuntu/rootfs_ubuntu.ubi
Ubuntu-RootFs-RunImage = Ubuntu/rootfs_ubuntu.ext3

############### UserBin part #################
UserBin-Image=WindowsCE/NK.nb0
userBin-StartAddress=50100000

请把android烧写到nand中运行，目前从sd中直接运行android还有些问题，但sd卡运行linux和wince, ubuntu是可以的

我试了，烧到NAND无法启动。。

SD启动后内存不足：
/ # free
             total         used         free       shared      buffers
Mem:        229236       217528        11708            0        10668
-/+ buffers:             206860        22376
Swap:            0            0            0

NAND启动情况如下：
/ # Installing OS 'ANDROID'
Download bootloader...
Download bootloader succeed
Download kernel...
Download kernel succeed
Download ubifs-image ...
Skip block 0x235
Skip block 0x2b3
Download ubifs-image succeed
OS 'ANDROID' Installed

UBI: background thread "ubi_bgt0d" started, PID 537                                      
s3c-hsotg s
PPP generic driver version 2.4.2ddr=0x00002a00K  fg            
PPP Deflate Compression module registered        
safe_serial: v0.1:USB Safe Encap
PPP BSD Compression module registered                            
4
s3c-h
dm9000 Ethernet Driver, V1.31=768, StAddr=0x00002d0061 262
eth0: dm9000a at d0814000,d0c00004 IRQ 108 MAC: 08:90:90:90:90:90 (chip)                                          
    1   0% S     1    3    
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver768, StAddr=0x                                        
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI EPCTL=0x00000000, SIZ=0x00000000, DMA=
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1                                                                        
s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000                
spcp8x5: v0.10              
      
hub 1-0:1.0: 2 ports detected                            
usbcore: registered new interface driver usbserial00000000, SIZ=0x00000000, DMA=0x000000000 481 482
USB Serial support registered for generic                                        
usbcore: registered new interface driver usbserial_generical support registered for symbolS                        
usbserial: USB Serial Driver core                                
USB Serial support regis                      
USB Serial support registered for ark3116                                        
usbcore: registered new interface driver ark3116  


1014    
USB Serial support regis        
ark3116:v0.6:USB ARK3116 serial/IrDA driver: EPCTL=0x0000000                          
USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter                      
s3c-hsotg s3c-hsotg: ep9-out: EPCTL=0x00000000, SIZ=0x0
usbcore: registered new interface driver belkinT driverfg root     zd1211rwer8   0% S     1  
belkin_sa: v1.3:USB Belkin Serial converter driver                                                  
USB Serial support registered for ch341-uart              
s3c-hsotg s3c-hsotg: ep10-in:
usbcore: registered new interface driver ch3410093 694 695 6er                              
USB Serial support registered for cp210x                    



Use  
        
cypress_m8: v1.10:Cypress USB to Serial Driver80006 MB                                      
USB Serial support registered for debug918 919 920 921 922 923 924 925 926 927
usbcore: registered new interface driver debug                            
s3c-hsotg s3c-hs
USB Serial support registered for Digi 2 port USB adapter                
MAC: 08:90:90:90:90:90in/m              
USB Serial support registered for Digi 4 port USB adapter, DOEPCTL0=0x8000800046 947 948 949 950 951 952 953 954 9
usbcore: registered new interface driver digi_acceleport                                                        
digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver_irq: USBRst5896K                                              

Re  
56 957
USB Serial support registered for Edgeport 2 port adapterhsotg s3c-hsotg: S3C_GINTSTS_USBSusp974 975 9=768,      
s3c-hs  
usbcore: registered new interface driver io_edgeport                            
fsg_probe pdev: c06625d
io_edgeport: v2.7:Edgeport USB Serial Drivert: gpio-keys as /devices/platform/gpio-keys/
USB Serial support registered for Edgeport TI 1 port adapter                                                        

M
USB Serial support registered for Edgeport TI 2 port adapterC Touchscreen driver, (c) 2010 FriendlyARM 1063 1064 1065 10
usbcore: registered new interface driver io_ti                                              
io_ti: v0.7mode043006:Edgeport USB Serial Driveressfully : 12 bitsks,                          
USB Serial support registered for empegg: ep0-out                          

s3c-fimc: controller
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver 1154 1155 1156000001                            
USB Serial support registered for funsoft                    
s3c-fimc: controlle
usbcore: registered new interface driver funsoft                        
mmc_bus: so          

USB Serial support registered for Garmin GPS usb/tty        
FIMC Driver, 2010 ported by FriendlyARM htt
usbcore: registered new interface driver garmin_gpsate is 48000000I subsys                            
garmin_gps: v0.33:garmin gps driver                                  
USB Serial support registered for hp4X                  
1173 1      
    
ir_usb: v0.5:USB IR Dongle driverily 2red                        
USB Serial support registered for iuu_phoenix
1018    
one_wire_status: 4c-hsotg s3c-hso
usbcore: registered new interface driver iuu_phoenixi.0: clock sourc                                  

iuu_phoenix: v0.12:Infinity USB Unlimited Phoenix driver  
logger: created 64K log 'log_radio'1401 1402 1403 140
USB Serial support registered for Keyspan - (without firmware)                      
logger: created 64K log 'log_system'  
USB Serial support registered for Keyspan 1 port adapter 0xff600000 - 0xf                              
asoc: AC
USB Serial support registered for Keyspan 2 port adapter1420 1421 142                                          
USB Serial support registered for Keyspan 4 port adapterfg_card: CTRL 2=c0004120, 3=00008080 332                
usbcore: registered new interface driver keyspan15   0% S     9  77                      

    l
keyspan: v1.1.5:Keyspan USB to Serial Conver
                                        
usbcore: registered new interface driver kobilFAT filesystems, filesystem will brface driver
kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)                                            
1590 1591 1592 1593 1594 159
USB Serial support registered for MCT U232                                    
e ca
usbcore: registered new interface driver mct_u232              
EXT3-fs: barriers not enabled64xx_
mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver              
EXT3-fs (loop0): using internal journal 1612 1613
usb 1-1: New USB device found, idVendor=05e3, idProduct=0606                                            
EXT3-fs (loop0
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0                                                        
EXT3-fs
USB Serial support registered for Moschip 2 port adapterjournald starting.  Commit interval 5 seconds3 1634 1635
mos7720: 2.1:Moschip USB Serial Driver                                      
usbcore: regist        
hub 1-1:1.0: 4 ports detected    
init: cannot open '/ini
usbcore: registered new interface driver mos7840                                                
USB Serial support registered for moto-modemrecated, please use /proc/1/oom_score_adj ed
usbcore: registered new interface driver moto-modem                        

cfg80211: Calling CRDA to
USB Serial support registered for navman /system/bin                            
usbcore: registered new interface driver navman  
1744 1745 1747 1748 1749 1750 175          
usbcore: registered new interface driver opticonnnot attach mtd                                
USB Serial support registered for GSM modem (1-port)bric driver version 2.4.2k21010                    
usbcore: registered new interface driver option        
benq: registered                
usbc
option: v0.7.2:USB Driver for GSM modems00usbor                                
USB Serial support registered for oti6858w interface dri                          
usbcore: registered new interface driver oti6858d new inter IOW                                
USB Serial support registered f        

T
usb  
        
USB Serial support registered for safe_serial:1224 transaction 1831 in, still activecore:
usbcore: registered new interface driver safe_serial                                                    
USB Serial support registered for siemens_mpigi        
usb  
one_wire_status: 2Driver c
usbcore: registered new interface      
pa  
                      
sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems    
binder: send failed reply for transaction 1705 to 126
USB Serial support registered for SPCP8x5 ark3116eduler                          
usbcore: registered new interface driver spcp8x5                                

init: untrack
spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driverquest_suspend_state: wakeup (0->0) at 110033774921
USB Serial support registered for Quatech SSU-100 USB to Serial Driver                                    
348 UTC)        

/ # binder: rel
usbcore: registered new interface driv                                    
usbcore: registered new interface driver ti_usb_3410_5052                                      
Swap:            0
ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver              
/ # Installing OS 'ANDROID'          
USB Serial support registered for Handspring Visor / Palm OS
Download bootloader succeed                          
Down
USB Serial support registered for Sony Clie 3.5 succeed                      
Download ubifs-
USB Serial support registered for kip block 0x235                

CPU:     S3C6410@532MHz                      
         Fclk = 532MHz,
USB Serial support registered for Connect Tech - WhiteHEAT                                                          
usbcore: registered new interface driver whiteheat      
DRAM:    256 MB              
Flash:   0
whiteheat: v2.0:USB ConnectTech WhiteHEAT driver:      serial              
Out:     serial    
USB Serial support registered for vivopay-serial8:90:90:90:90:90                      
Hit any k
usbcore: registered new interface driver vivopay-serial
NAND read: device 0 offset 0x80000, size 0x500000    
vivopay_serial: v1.0:ViVOpay USB Serial Drivereading data from 0x57f800 -- 100% complete.  
USB Serial support registered for z    
5242880 bytes            
S3C64XX: HCLK2=266000000, HCLK=133000000, P
s3c-hsotg s3c-hsotg: DPTx[3] FSize=768, StAddr=0x00001500        
mout_apll: source is fout_apll (1), rate is 532
s3c-hsotg s3c-hsotg: DPTx[4] FSize=768, StAddr=0x00001800
mout_epll: source is epll (1), rate is 24000000        
s3c-hsotg s3c-hsotg: DPTx[5] FSize=768, StAddr=0x00001b00is mpll (1), rate is 532000000                          
s3c-hsotg s3c-hsotg: DPTx[6] FSize=768, StAddr=0x00001e00te is 24000000                                          
s3c-hsotg s3c-hsotg: DPTx[7] FSize=768, StAddr=0x00002100                                                  
mmc_bu
s3c-hsotg s3c-hsotg: DPTx[8] FSize=768, StAddr=0x00002400                                    
usb-bus-host: source
s3c-hsotg s3c-hsotg: DPTx[9] FSize=768, StAddr=0x000                                
                
s3c-hsotg s3c-hsotg: DPTx[14] FSize=768, StAddr=0x00003600 is mout_epll (0), rate is 24000000                      
s3c-hsotg s3c-hsotg: DPTx[15] FSize=768, StAddr=0x00003900 (0), rate is 24000000        
digi_acceleport: v1.80.1.2:
s3c-hsotg s3c-hsotg: ep0-in: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000s 84
s3c64xx: 4194304 bytes SDRAM reserved for fimc at 0x5fbf8000            
s3c-hsotg s3c-hsotg: ep0-out: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000eserved for jpeg at 0x5f7f8000                    
                          
=/linuxrc console=ttySAC0,115200
s3c-hsotg s3c-hsotg: ep2-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000                        
PID hash table entries: 1024 (order: 0, 4096 bytes)

s3c-hsotg s3c-hsotg: ep3-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000ies: 32768 (order: 5, 131072 bytes)                  
s3c64xx: 4194304 bytes
s3c-hsotg s3c-hsotg: ep3-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000tes)ed new interface driver io_                                  
Memory: 256M
s3c-hsotg s3c-hsotg: ep4-in: EPCTL=0x0000000                                          
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0,
s3c-hsotg s3c-hsotg: ep8-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000000 - 0xd
Hierarchical RCU implementation.                                
    
s3c-hsotg s3c-hsotg: ep9-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000r PocketPC PDAs : 0xbf000000 -
        Verbose stalled-CPUs detection is disa
s3c-hsotg s3c-hsotg: ep9-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000
VIC @f4000000: id 0x00041192, vendor 0x41   .init : 0xc0008000 - 0xc0165    
s3c-hsotg s3c-hsotg: ep10-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000al: USB S
High resolution timer: rate = 66500000, HZ = 100                
ir
s3c-hsotg s3c-hsotg: ep10-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000                
console [ttySAC0] enabled      
USB Serial suppor
Calibratin
s3c-hsotg s3c-hsotg: ep11-in: EPCTL=0x0000                                        
android_probe pdata: c06629b8
s3c64xx_dma_init1: register
android_bind80c100)    
android_usb gadget: android_usb ready    
s3c64xx_dma_init1: registering D
s3c-hsotg s3c-hsotg: new device is full-speed(prerenumeration
s3c64xx_dma_init1: registeri
s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst                        
s3c64xx_dma_init
s3c-hsotg s3c-hsotg: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000            
s3c64xx_dma_init1: registering DMA 12 (d080c180)egra
s3c-hsotg s3c-hsotg: DCTL=0x00000002      
s3c64xx_dma_init1: registeri
s3c-hsotg s3c-hsotg: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
s3c64xx_dma_init1: registering DMA 14 (d080c1c0)232 con        
s3c-hsotg s3c-hsotg: S        
          
fsg_probe pdev: c06625d8, pdata: c0662940re: registered new interface driver usbfs
android_register_function usb_mass_storage  
usbcore: registered new interface driv
android_usb gadget: Mass Storage Function, version: 2009/09/11istered new device driver usb                            
USB
android_usb gadget: Number of LUNs=1ddress 0x10
USB Serial support regis
lun0: LUN: removable file: (no medium)frequency set to 64 KHz                
adb_bind_config              
mice: PS/2 mouse device common for all micernew device driver usbgeport 4 port        
input: gpio-keys as /devices/platform/gpio-keys/input/input0:Moschip 7840/7820 USB Serial Driverave addres      
Blueto
S3C Touchscreen driver,                  
  
IP route cache hash table entries: 2048 (o
s3c-rtc s3c64xx-rtc: rtc disabled, re-enablingce driver opticon192 (order: 4, 655
TCP establ
using rtc device, s3c, for alarmsder: 4, 65536 bytes)            
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0P bind hash table entries: 8192 (order: 3, 32768 byte
Linux video capture interface: v2.00ytes)ial              
TCP: Hash tab
s3c-fimc: controller 0 registered successfully                            
usbcore: register
s3c-fimc: controller 1 registered successfullyDP hash table entries: 256 (order: 0, 4096: Ha
RPC: Registered tcp NFSv4.1 backchanne
s3c-g2d: Driver loaded succesfully                                  
s3c-g2d: Module initialized.rial support regi
squashfs:
s3c-g3d: detected FIMG-3DSE version 1.5.0Loughersus                              
s3c-g3d: Driver loaded succesfullyd (default)        
usbcore: regi
s3c-g3d: Module initialized.cfq registeredew interface d
Bluetooth: HCI UART driver ver 2.2bled :: 133.000 Mhz              
Bluetooth: HCI H4 protocol initialized43 will be initialized9)              
Bluetooth: HCILL protocol initializedap_video_memory: clear ff600000:0007f
Bluetooth: Generic Bluetooth USB driver ver 0.6      

S3C_
                                
Window[1] - FB1: map_video_memory: clear f
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMAze=0007f8
            FB1: map_video_memory: dma=5e380000 cpu=ff
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)                        
usbcore:
Window[1] - FB2: map_vid
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)b1: s3cfb frame buffer device  
                          
logger: created 256K log 'log_events'(irq = 20) is a S3C6400/10stered new
logger: created 64K log 'log_radio' a S3C6400/10mandm.android.qui
s3c6
logger: created 64K log 'log_system'x7f005800 (irq = 24) is a S3C6400/10
asoc: AC97 HiFi <-> s3c-ac97 mapping okh SSU-100 USB to Serial Driverohci a
s
UBI error: do_sync_erase: cannot erase PEB 521, error -528) is a S3C6400/10_serial2 at MMIO 0x                  
UBI error: erase_worker: failed to erase PEB 521, error -5dymbolSerial support
pmem: 1 initor Keyspan  
S3C NAND Dri
UBI: mark PEB 521 as badc                      
UBI error: do_sync_erase: cannot erase PEB 1729, error -50000 : "Kernel"                                        
0
UBI error: erase_worker: failed to erase PEB 1729, error -5 support registered for vivop
UBI: attaching mtd2 to ubi0r
UBI: mark PEB 1729 as badUBI: physical eraseblock
UBI: 17 PEBs left in the reserve                                
s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=0000808024 byteserror -74 (ECC error) while reading 64 bytes
UBI
mmc0: new SD card at address aaaa                                
mmcblk0: mmc0:aaaa SD02G 1.84 GiB    512    
                    
mmcblk0
    
Bluetooth: L2CAP ver 2.15sbco
1:0, read 64 bytesin
Bluetooth: L2CAP socket layer initializedrror -74 (ECC error) while reading 64 byt
Bluetooth: SCO (Voice Link) ver 0.6    
usbcore: reg            
Init
Bluetooth: SCO socket layer initializedes      0K      0K  
UBI error: ubi_io_
Bluetooth: RFCOMM TTY layer initializedg 64 bytes from PEB 17    
usbcore: reg
Bluetooth: RFCOMM socket layer initialized18                  
29:0, read 64 bytes  
Bluetooth: RFCOMM ver 1.11upted PEBs will be formatt
Bluetooth: BNEP (Ethernet Emulation) ver 1.3max. sequence number:       0              
Bluetooth: HIDP (Human Interface Emulation) ver 1.2") re-sized from 702 t                            
one_wire_sta          
one_wire_sta          
UBIFS: reserved for root:  0 bytes (0 KiB)
one_wire_status: 4
1Wire touchscreen OK
TouchDevice: /dev/touchscreen-1wire
xres = 480, yres = 272
Took 7 samples...
Top left : X = 3123 Y =  557
Took 7 samples...
Top right : X = 3125 Y = 3533
Took 11 samples...
Bot right : X =  928 Y = 3534
Took 9 samples...
Bot left : X =  909 Y =  557
Took 9 samples...
Center : X = 2026 Y = 2047
-21.212585 0.000029 0.127667
293.138763 -0.077985 0.000275
init: cannot open '/initlogo.rle'
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instea
d.
enabling adb
adb_open
/ # warning: `rild' uses 32-bit capabilities (legacy support in use)

校正触摸屏后在ANDROID_闪烁，重复出现以下信息，进入不了系统：
request_suspend_state: wakeup (0->0) at 108068693505 (2010-03-11 10:25:43.847752
196 UTC)
init: untracked pid 1199 exited
init: untracked pid 1200 exited
UBIFS error (pid 1216): ubifs_check_node: bad CRC: calculated 0x18f14fac, read 0
x798f33e7
UBIFS error (pid 1216): ubifs_check_node: bad node at LEB 465:37296
UBIFS error (pid 1216): ubifs_read_node: expected node type 1
UBIFS error (pid 1216): do_readpage: cannot read page 109 of inode 306, error -1
17
one_wire_status: 4
UBIFS error (pid 1216): ubifs_check_node: bad CRC: calculated 0xcb378471, read 0
x940a7ff
UBIFS error (pid 1216): ubifs_check_node: bad node at LEB 450:66304
UBIFS error (pid 1216): ubifs_read_node: expected node type 1
UBIFS error (pid 1216): do_readpage: cannot read page 530 of inode 303, error -1
17
one_wire_status: 2
request_suspend_state: wakeup (0->0) at 112197465896 (2010-03-11 10:25:47.976524
301 UTC)
init: untracked pid 1208 exited
init: untracked pid 1209 exited

版主，请问下着情况是什么原因啊？？？

问题已解决，格式化SD重新烧写后正常

再次尝试，并非SD卡问题，因为有时还是出现这种问题，不过发现“拔掉开发板电源”过段时间再烧写启动，就没这种问题出现，难道每次都远断电一段时间，硬件问题？