mini2440-128M写官方zImage写不进。求救

mini2440-128M的开发板，刚下载了20100925的光盘ISO.用DNW写就是写不进，

现象:
      当用k命令烧写内核时，用dnw传zImage时dnw进度条不走，超级终端又回到命令选择状态。



supervivi也升为最新的 1026-2K版本

写其他自己定义的zImage能写进。虽然是错误的zImage

要把supervivi-1026烧写到nor才是真正升级

是的，已经把supervivi-1026烧写到nor了

是的，已经把supervivi-1026烧写到nor了。不是NOR的问题，光盘下载下来我就升了NOR.

请把bios输出信息发来看看

USB host is connected. Waiting a download.
Length of file is too big : 2266568 > 2097152
Failed downloading file

是这个原因，，这么说128M的没法用了？

我是说nor启动时的bios输出完整信息

##### FriendlyARM BIOS 2.0 for 2440 #####

[x] format NAND FLASH for Linux

[v] Download vivi

[k] Download linux kernel

[y] Download root_yaffs image

[a] Absolute User Application

[n] Download Nboot for WinCE

[l] Download WinCE boot-logo

[w] Download WinCE NK.bin

[d] Download & Run

[z] Download zImage into RAM

[g] Boot linux from RAM

[f] Format the nand flash

Boot the system

[s] Set the boot parameters

Backup NAND Flash to HOST through USB(upload)

[r] Restore NAND Flash from HOST through USB

[q] Goto shell of vivi

Version: 1026-2K

Enter your selection:

先格式化再烧写试试，格式化命令“f"

格式化过了。还是一样