下面是出错时的信息（从ANDROID开始启动截取的）：
可以看到最后是循环的。


android init
android_probe pdata: c06ccb00
android_bind
android_usb gadget: android_usb ready
s3c-hsotg s3c-hsotg: new device is full-speed
s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst
s3c-hsotg s3c-hsotg: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
s3c-hsotg s3c-hsotg: DCTL=0x00000002
s3c-hsotg s3c-hsotg: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
s3c-hsotg s3c-hsotg: S3C_GINTSTS_USBSusp
s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst
s3c-hsotg s3c-hsotg: bound driver android_usb
f_adb init
android_register_function adb
f_mass_storage init
fsg_probe pdev: c06cc720, pdata: c06cca88
android_register_function usb_mass_storage
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
lun0: LUN: removable file: (no medium)
adb_bind_config
mice: could not register psaux device, error: -16
mice: PS/2 mouse device common for all mice
input: gpio-keys as /devices/platform/gpio-keys/input/input0
S3C Touchscreen driver, (c) 2010 FriendlyARM
touchscreen got loaded successfully : 12 bits
touchscreen-1wire    initialized
backlight-1wire    initialized
input: TouchScreen Pipe as /devices/virtual/input/input1
ts-if    initialized
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
using rtc device, s3c, for alarms
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
usbcore: registered new interface driver usbvision
USBVision USB Video Device Driver for Linux : 0.9.10
usbcore: registered new interface driver pvrusb2
pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
pvrusb2: Debug mask is 31 (0x1f)
usbcore: registered new interface driver zr364xx
zr364xx: Zoran 364xx
one_wire_status: 4
usbcore: registered new interface driver stkwebcam
gspca: main v2.10.0 registered
usbcore: registered new interface driver hdpvr
usbcore: registered new interface driver s2255
s3c-fimc: controller 0 registered successfully
s3c-fimc: controller 1 registered successfully
FIMC Driver, 2010 ported by FriendlyARM http://www.arm9.net
ov965x: probe
parent clock for camera: 266.000 MHz, divisor: 11
[CAM]RESET CAM.
one_wire_status: 4
S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics
S3C6410 TV encoder Driver, (c) 2008 Samsung Electronics
S3C6410 TV encoder Driver init OK.
S3C6410 TV scaler Driver, (c) 2008 Samsung Electronics
S3C6410 TV scaler Driver init OK.
S3C JPEG Driver, (c) 2007 Samsung Electronics
s3c-g2d: Driver loaded succesfully
s3c-g2d: Module initialized.
s3c_g3d: clock enabled
s3c-g3d: detected FIMG-3DSE version 1.5.0
s3c-g3d: Driver loaded succesfully
s3c-g3d: Module initialized.
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
one_wire_status: 4
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
one_wire_status: 4
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (84666666 Hz)
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (84666666 Hz)
s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=80808080
one_wire_status: 2
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
asoc: AC97 HiFi <-> s3c-ac97 mapping ok
s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=00008080
mmc0: new SDHC card at address e624
mmcblk0: mmc0:e624 SD04G 3.69 GiB
mmcblk0: p1
s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=80808080
ALSA device list:
  #0: MINI6410 (WM9713)
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
one_wire_status: 2
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-19 03:52:50 UTC (948253970)
Freeing init memory: 1396K
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "FriendlyARM-root"
UBIFS: file system size:   2064384000 bytes (2016000 KiB, 1968 MiB, 2000 LEBs)
UBIFS: journal size:       12517376 bytes (12224 KiB, 11 MiB, 13 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  0 bytes (0 KiB)
one_wire_status: 4
init: cannot open '/initlogo.rle'
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
enabling adb
adb_open
warning: `rild' uses 32-bit capabilities (legacy support in use)
/ # [6nCompat-wireless backport release: compat-wireless-2011-01-06
Backport based on linux-next.git next-20110111
cfg80211: Calling CRDA to update world regulatory domain
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
usbcore: registered new interface driver ath9k_hif_usb
usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver rt2800usb
usbcore: registered new interface driver zd1211rw
pmem_map: PID=1226, id=1, [5b7f8000 - 00001000] --> [ 40087000 - 00001000]
pmem_map: PID=1234, id=1, [5b818000 - 00020000] --> [ 400be000 - 00016000]
pmem_map: PID=1234, id=1, [5b838000 - 00040000] --> [ 4008c000 - 0002b000]
request_suspend_state: wakeup (3->0) at 61948249476 (2000-01-19 03:53:42.523767264 UTC)
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
alarm_release: clear alarm, pending 0
alarm_release: clear alarm, pending 0
request_suspend_state: wakeup (0->0) at 85675455912 (2000-01-19 03:54:06.250974181 UTC)
init: untracked pid 1123 exited
init: untracked pid 1130 exited
init: untracked pid 1315 exited
init: untracked pid 1338 exited
init: untracked pid 1478 exited
init: untracked pid 1460 exited
init: untracked pid 1446 exited
init: untracked pid 1500 exited
init: untracked pid 1327 exited
init: untracked pid 1429 exited
init: untracked pid 1438 exited
init: untracked pid 1468 exited
init: untracked pid 1490 exited
init: untracked pid 1395 exited
init: untracked pid 1378 exited
init: untracked pid 1405 exited
init: untracked pid 1417 exited
pmem_map: PID=1532, id=1, [5b7f8000 - 00001000] --> [ 40101000 - 00001000]
pmem_map: PID=1541, id=1, [5b818000 - 00020000] --> [ 40047000 - 00016000]
pmem_map: PID=1541, id=1, [5b838000 - 00040000] --> [ 400c7000 - 0002b000]
request_suspend_state: wakeup (0->0) at 107847645912 (2000-01-19 03:54:28.423163850 UTC)
alarm_release: clear alarm, pending 0
alarm_release: clear alarm, pending 0
request_suspend_state: wakeup (0->0) at 132135223776 (2000-01-19 03:54:52.710741745 UTC)
init: untracked pid 1514 exited
init: untracked pid 1515 exited
init: untracked pid 1587 exited
init: untracked pid 1773 exited
init: untracked pid 1633 exited
init: untracked pid 1765 exited
init: untracked pid 1729 exited
init: untracked pid 1708 exited
init: untracked pid 1791 exited
init: untracked pid 1696 exited
init: untracked pid 1782 exited
init: untracked pid 1741 exited
init: untracked pid 1680 exited
init: untracked pid 1717 exited
init: untracked pid 1750 exited
init: untracked pid 1647 exited
pmem_map: PID=1825, id=1, [5b7f8000 - 00001000] --> [ 4019c000 - 00001000]
pmem_map: PID=1833, id=1, [5b818000 - 00020000] --> [ 40079000 - 00016000]
pmem_map: PID=1833, id=1, [5b838000 - 00040000] --> [ 4008f000 - 0002b000]
request_suspend_state: wakeup (0->0) at 153995958258 (2000-01-19 03:55:14.571476361 UTC)
alarm_release: clear alarm, pending 0
alarm_release: clear alarm, pending 0
request_suspend_state: wakeup (0->0) at 178285866558 (2000-01-19 03:55:38.861384842 UTC)
init: untracked pid 1808 exited
init: untracked pid 1809 exited
init: untracked pid 2074 exited
init: untracked pid 1880 exited
init: untracked pid 1940 exited
init: untracked pid 2066 exited
init: untracked pid 2057 exited
init: untracked pid 2039 exited
init: untracked pid 2083 exited
init: untracked pid 2017 exited
init: untracked pid 2008 exited
init: untracked pid 1998 exited
init: untracked pid 1980 exited
init: untracked pid 2025 exited
init: untracked pid 2048 exited
init: untracked pid 1929 exited
pmem_map: PID=2117, id=1, [5b7f8000 - 00001000] --> [ 41168000 - 00001000]
pmem_map: PID=2125, id=1, [5b818000 - 00020000] --> [ 40199000 - 00016000]
pmem_map: PID=2125, id=1, [5b838000 - 00040000] --> [ 401af000 - 0002b000]
request_suspend_state: wakeup (0->0) at 199768034348 (2000-01-19 03:56:00.343552406 UTC)
alarm_release: clear alarm, pending 0
alarm_release: clear alarm, pending 0
request_suspend_state: wakeup (0->0) at 223973532964 (2000-01-19 03:56:24.549050843 UTC)
init: untracked pid 2101 exited
init: untracked pid 2177 exited
init: untracked pid 2355 exited
init: untracked pid 2364 exited
init: untracked pid 2100 exited
init: untracked pid 2332 exited
init: untracked pid 2230 exited
init: untracked pid 2315 exited
init: untracked pid 2271 exited
init: untracked pid 2284 exited
init: untracked pid 2324 exited
init: untracked pid 2297 exited
init: untracked pid 2347 exited
init: untracked pid 2305 exited
init: untracked pid 2374 exited
init: untracked pid 2221 exited
pmem_map: PID=2406, id=1, [5b7f8000 - 00001000] --> [ 400ca000 - 00001000]
pmem_map: PID=2415, id=1, [5b818000 - 00020000] --> [ 4000e000 - 00016000]
pmem_map: PID=2415, id=1, [5b838000 - 00040000] --> [ 4004b000 - 0002b000]
request_suspend_state: wakeup (0->0) at 246126403867 (2000-01-19 03:56:46.701922076 UTC)
alarm_release: clear alarm, pending 0
alarm_release: clear alarm, pending 0
request_suspend_state: wakeup (0->0) at 256018686633 (2000-01-19 03:56:56.594204451 UTC)
init: untracked pid 2389 exited
init: untracked pid 2390 exited
init: untracked pid 2501 exited
init: untracked pid 2593 exited
init: untracked pid 2584 exited
init: untracked pid 2549 exited
init: untracked pid 2572 exited
init: untracked pid 2516 exited
init: untracked pid 2512 exited
pmem_map: PID=2619, id=1, [5b7f8000 - 00001000] --> [ 40118000 - 00001000]
pmem_map: PID=2627, id=1, [5b818000 - 00020000] --> [ 402c9000 - 00016000]
pmem_map: PID=2627, id=1, [5b838000 - 00040000] --> [ 402df000 - 0002b000]
request_suspend_state: wakeup (0->0) at 277523776904 (2000-01-19 03:57:18.099294827 UTC)
alarm_release: clear alarm, pending 0
alarm_release: clear alarm, pending 0
request_suspend_state: wakeup (0->0) at 301744436468 (2000-01-19 03:57:42.319954752 UTC)
init: untracked pid 2602 exited
init: untracked pid 2603 exited
init: untracked pid 2673 exited
init: untracked pid 2732 exited
init: untracked pid 2860 exited
init: untracked pid 2852 exited
init: untracked pid 2828 exited
init: untracked pid 2795 exited
init: untracked pid 2837 exited
init: untracked pid 2879 exited
init: untracked pid 2777 exited
init: untracked pid 2817 exited
init: untracked pid 2774 exited
init: untracked pid 2809 exited
init: untracked pid 2869 exited
init: untracked pid 2718 exited

现象表现启动后进入android后，一会就会自动回到android的动画启动画面。

我现在已经用的是7月3日的七寸屏的文件了。

昨天还是好的，今天又不行了，点解

好象是android中/system/core/init/init.c中的


static int wait_for_one_process(int block)
函数中

static int wait_for_one_process(int block)
{
    pid_t pid;
    int status;
    struct service *svc;
    struct socketinfo *si;
    time_t now;
    struct listnode *node;
    struct command *cmd;

    while ( (pid = waitpid(-1, &status, block ? 0 : WNOHANG)) == -1 && errno == EINTR );
    if (pid <= 0) return -1;
    INFO("waitpid returned pid %d, status = %08x\n", pid, status);

    svc = service_find_by_pid(pid);
    if (!svc) {
        ERROR("untracked pid %d exited\n", pid);            //这里报的错吧，什么原因呢
        return 0;
    }

    NOTICE("process '%s', pid %d exited\n", svc->name, pid);

    if (!(svc->flags & SVC_ONESHOT)) {
        kill(-pid, SIGKILL);
        NOTICE("process '%s' killing any children in process group\n", svc->name);
    }

    /* remove any sockets we may have created */
    for (si = svc->sockets; si; si = si->next) {
        char tmp[128];
        snprintf(tmp, sizeof(tmp), ANDROID_SOCKET_DIR"/%s", si->name);
        unlink(tmp);
    }

    svc->pid = 0;
    svc->flags &= (~SVC_RUNNING);

        /* oneshot processes go into the disabled state on exit */
    if (svc->flags & SVC_ONESHOT) {
        svc->flags |= SVC_DISABLED;
    }

        /* disabled processes do not get restarted automatically */
    if (svc->flags & SVC_DISABLED) {
        notify_service_state(svc->name, "stopped");
        return 0;
    }

会是硬件错误吗？是不是内存有坏块呢

我看到以前的帖好象有人也是有这个问题。
http://www.aiothome.net/simple/index.php?t13015.html
应该是软件上的问题，希望下版能改进哈，结帖了。