在移植腾达的USBmini无线网卡（芯片为RT5370）到6410板子上的时候，设备可以启动，搜索到网络，可以连接上网络，但是出现
GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)
AsicAdjustTxPower: Incorrect desired TSSI or current TSSI
具体打印信息如下：
[root@6410 wireless]# ifconfig ra0 up
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
RTMP_TimerListAdd: add timer obj d1dbcc98!
RTMP_TimerListAdd: add timer obj d1dbccc8!
RTMP_TimerListAdd: add timer obj d1dbccf8!
RTMP_TimerListAdd: add timer obj d1dbcc68!
RTMP_TimerListAdd: add timer obj d1dbcbd8!
RTMP_TimerListAdd: add timer obj d1dbcc08!
RTMP_TimerListAdd: add timer obj d1d8780c!
one_wire_status: 4
RTMP_TimerListAdd: add timer obj d1d76fd0!
RTMP_TimerListAdd: add timer obj d1d77008!
RTMP_TimerListAdd: add timer obj d1d878b0!
RTMP_TimerListAdd: add timer obj d1d877ac!
RTMP_TimerListAdd: add timer obj d1d8787c!
one_wire_status: 4
-->RTUSBVenderReset
<--RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 5
2. Phy Mode = 5
NVM is Efuse and its size =2d[2d0-2fc]
phy mode> Error! The chip does not support 5G band 15!
RTMPSetPhyMode: channel is out of range, use first channel=1
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
3. Phy Mode = 9
AntCfgInit: primary/secondary ant 0/1
AsicSetRxAnt, switch to main antenna
MCS Set = ff 00 00 00 01
<==== rt28xx_init, Status=0
0x1300 = 00064300
[root@6410 wireless]# iwlist ra0 scan
===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 422
ra0 Scan completed :
Cell 01 - Address: F0:7D:68:51C:6E
Protocol:802.11b/g/n
ESSID:"123456"
Mode:Managed
Frequency:2.412 GHz (Channel 1)
Quality=83/100 Signal level=-57 dBm Noise level=-92 dBm
Encryption keyn
Bit Rates:54 Mb/s
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Cell 02 - Address: 00:15:E9:0E:7E:9E
Protocol:802.11b/g
ESSID:""
Mode:Managed
Frequency:2.437 GHz (Channel 6)
Quality=26/100 Signal level=-79 dBm Noise level=-74 dBm
Encryption keyn
Bit Rates:54 Mb/s
Cell 03 - Address: 8C:21:0A:3C:A4:FA
Protocol:802.11b/g/n
ESSID:"CHNHE"
Mode:Managed
Frequency:2.437 GHz (Channel 6)
Quality=2/100 Signal level=-89 dBm Noise level=-84 dBm
Encryption keyn
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD0E0050F204104A0001101044000102
[root@6410 /etc]# ./wlconfig
rtusb init rt2870 --->
=== pAd = d1d75000, size = 513648 ===
<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
usbcore: registered new inte**ce driver rt2870
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
RTMP_TimerListAdd: add timer obj d1dbcc98!
RTMP_TimerListAdd: add timer obj d1dbccc8!
RTMP_TimerListAdd: add timer obj d1dbccf8!
RTMP_TimerListAdd: add timer obj d1dbcc68!
RTMP_TimerListAdd: add timer obj d1dbcbd8!
RTMP_TimerListAdd: add timer obj d1dbcc08!
one_wire_status: 4
RTMP_TimerListAdd: add timer obj d1d8780c!
RTMP_TimerListAdd: add timer obj d1d76fd0!
RTMP_TimerListAdd: add timer obj d1d77008!
RTMP_TimerListAdd: add timer obj d1d878b0!
RTMP_TimerListAdd: add timer obj d1d877ac!
one_wire_status: 4
RTMP_TimerListAdd: add timer obj d1d8787c!
-->RTUSBVenderReset
<--RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 5
2. Phy Mode = 5
NVM is Efuse and its size =2d[2d0-2fc]
phy mode> Error! The chip does not support 5G band 15!
RTMPSetPhyMode: channel is out of range, use first channel=1
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
3. Phy Mode = 9
AntCfgInit: primary/secondary ant 0/1
AsicSetRxAnt, switch to main antenna
MCS Set = ff 00 00 00 01
<==== rt28xx_init, Status=0
0x1300 = 00064300
udhcpc (v1.17.2) started
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 171
==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=1)
Sending discover...
RTMP_TimerListAdd: add timer obj d1deb6b4!
Sending discover...
Rcv Wcid(1) AddBAReq
Start Seq = 00000000
RTMP_TimerListAdd: add timer obj d1ded6d4!
Sending select for 192.168.0.159...
Lease of 192.168.0.159 obtained, lease time 7200
deleting routers
route: SIOCDELRT: No such process
adding dns 192.168.0.250
adding dns 192.168.0.254
[root@6410 /etc]# GetDesiredTssiAndCurrentTssi: Out of range, *pCurrentTssi = -127
GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)
AsicAdjustTxPower: Incorrect desired TSSI or current TSSI
GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)
AsicAdjustTxPower: Incorrect desired TSSI or current TSSI
GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)
AsicAdjustTxPower: Incorrect desired TSSI or current TSSI
GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)
AsicAdjustTxPower: Incorrect desired TSSI or current TSSI
为什么打印输出信息提示：
Lease of 192.168.0.159 obtained, lease time 7200
deleting routers
route: SIOCDELRT: No such process
以及
GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)
AsicAdjustTxPower: Incorrect desired TSSI or current TSSI
如何解决这些问题？望各位高手指点一下
