Micro2440开发板，nandflash256M，uboot引导
用的红帽9编译的内核
下载内核之后
I2C: ready
DRAM: 64 MB
Flash: 2 MB
NAND: 256 MiB
Video: 240x320x16 20kHz 62Hz
In: serial
Out: serial
Err: serial
USB slave is enable!
Net: dm9000
U-Boot 2010.03 ( 3月 28 2013 - 18:59:27)
modified by tekkamanninja
(
tekkamanninja@163.com)
Love Linux forever!!
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x80000, size 0x500000
5242880 bytes read: OK
## Booting kernel from Legacy Image at 30008000 ...
Image Name: Linux-2.6.32.2-FriendlyARM
Created: 2013-03-29 9:01:26 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2286792 Bytes = 2.2 MB
Load Address: 30008000
Entry Point: 30008000
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK
[Starting kernel ...
data abort
pc : [<30008008>] lr : [<33fa6568>]
sp : 33f3ddfc ip : 00000000 fp : 30008000
r10: 33fc3008 r9 : 000007cf r8 : 33f3ffe0
r7 : 33f3ffc4 r6 : 33f413d3 r5 : 30000100 r4 : 00000000
r3 : 00000000 r2 : 30000100 r1 : 000007cf r0 : 00000000
Flags: nzCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...之后就一直重启，搞了半天还是不懂是哪里出了问题，求指导~谢谢啦
