菜鸟啊！请教大虾们，mini210的android启动触摸校准程序如何去掉啊！

如题！我不想启动友善移植的触摸校准功能，因为我采用电容屏设备。但是我不知道如何禁止这套机制。郁闷，请大虾们指教下

烧写配置文件的启动参数中添加skipcali=y即可

################### Android 4.0.3 ####################
#启动参数中加入skipcali=yes是为了跳过校准界面，以便直接使用鼠标操作
Android-BootLoader = Superboot210.bin
Android-Kernel = Android/zImageAndroid-CommandLine = root=/dev/mtdblock4 console=ttySAC0,115200 init=/linuxrc androidboot.console=ttySAC0 skipcali=yes

y或yes均可

感谢各位的帮助！校准程序是跳过了，但是android启动死机了。我附上logcat输出的死机段的信息，请帮我分析下是什么原因？
[    9.476824] init: cannot open '/initlogo.rle'
[   10.302182] enabling adb
[   10.315865] Enabled => usb_mass_storage
[   10.315903] Enabled => adb
[   10.347226] adb_open

/ #
/ # [   11.943491] PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110
[478, drivers/gpu/pvr/s5pc110/sysconfig.c]
[   12.551974] wm8960 0-001a: Failed to issue reset
log[   13.568292] Compat-wireless backport release: compat-wireless-2012-02-28
[   13.568357] Backport based on linux-next.git next-20120228
ca[   13.920256] cfg80211: Calling CRDA to update world regulatory domain
t
[   14.136557] libertas_sdio: Libertas SDIO driver
[   14.136603] libertas_sdio: Copyright Pierre Ossman
--------- beginning of /dev/log/main
I/DEBUG   (   55): debuggerd: Jun  7 2012 13:02:38
I/Netd    (   54): Netd 1.0 starting
--------- beginning of /dev/log/system
I/Vold    (   53): Vold 2.1 (the revenge) firing up
I/ServiceManager(   53): Waiting for service SurfaceFlinger...
I/ServiceManager(   53): Waiting for service SurfaceFlinger...
I/ServiceManager(   53): Waiting for service SurfaceFlinger...
D/AndroidRuntime(   59):
D/AndroidRuntime(   59): >>>>>> AndroidRuntime START com.android.internal.os.Zyg
oteInit <<<<<<
D/AndroidRuntime(   59): CheckJNI is ON
I/ServiceManager(   53): Waiting for service SurfaceFlinger...
[   15.514490] usbcore: registered new interface driver ath9k_htc
D/dalvikvm(   59): creating instr width table
[   15.783439] usbcore: registered new interface driver rt73usb
[   16.010019] usbcore: registered new interface driver rt2800usb
I/        (   60): ServiceManager: 0xad50
E/AudioHardware(   60): Can't load libsecril-client.so
D/AudioHardwareInterface(   60): setMode(NORMAL)
I/CameraService(   60): CameraService started (pid=60)
I/ServiceManager(   53): Waiting for service SurfaceFlinger...
I/AudioFlinger(   60): AudioFlinger's thread 0xc750 ready to run
D/AudioHardware(   60): AudioStreamOutALSA::setParameters() routing=2
D/AudioHardware(   60): ### setVoiceVolume
D/dalvikvm(   59): DexOpt: incorrect opt magic number (0xff ff ff ff)
D/dalvikvm(   59): ODEX file is stale or bad; removing and retrying (/data/dalvi
k-cache/system@framework@ext.jar@classes.dex)
[   16.656836]
[   16.656842] rtw driver version=v3.0.1590.20110511
[   16.657083] usbcore: registered new interface driver rtl8192cu
[   16.759891] usbcore: registered new interface driver zd1211rw
W/libhdmiservice(   53): SurfaceFlinger not published, waiting...
D/dalvikvm(   59): DexOpt: --- BEGIN 'ext.jar' (bootstrap=1) ---
D/dalvikvm(  116): creating instr width table
I/ServiceManager(   53): Waiting for service SurfaceFlinger...
I/ServiceManager(   53): Waiting for service SurfaceFlinger...
I/ServiceManager(   53): Waiting for service SurfaceFlinger...
D/dalvikvm(  116): DexOpt: load 1278ms, verify+opt 1146ms
D/dalvikvm(   59): DexOpt: --- END 'ext.jar' (success) ---
D/dalvikvm(   59): DEX prep '/system/framework/ext.jar': unzip in 939ms, rewrite
2608ms
I/ServiceManager(   53): Waiting for service SurfaceFlinger...
I/ServiceManager(   53): Waiting for service SurfaceFlinger...