我的ARM板子是Tiny6410, 使用superboot刷机后，系统启动不了，出错信息如下，请高手帮忙看一下，本人菜鸟。感激不甚


超级终端中显示：

mmc0: new high speed SDHC card at address 1234
mmcblk0: mmc0:1234 SA04G 3.70 GiB
mmcblk0: p1
ALSA device list:
  #0: MINI6410
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2012-02-25 17:53:28 UTC (1330192408
)
Freeing init memory: 1408K
mount: mounting ubi0:FriendlyARM-root on /r failed: No such device
1Wire touchscreen OK
/init: line 103: can't open /r/dev/console: no such file
Kernel panic - not syncing: Attempted to kill init!
[<c0177c44>] (unwind_backtrace+0x0/0xe4) from [<c05147bc>] (panic+0x58/0x174)
[<c05147bc>] (panic+0x58/0x174) from [<c0189e48>] (do_exit+0x68/0x5e4)
[<c0189e48>] (do_exit+0x68/0x5e4) from [<c018a688>] (do_group_exit+0x90/0xc4)
[<c018a688>] (do_group_exit+0x90/0xc4) from [<c018a6cc>] (sys_exit_group+0x10/0x
18)
[<c018a6cc>] (sys_exit_group+0x10/0x18) from [<c01725e0>] (ret_fast_syscall+0x0/
0x30)
one_wire_status: 2

刷错image了吧

我的板子是Tiny6410的，为什么超级终端中会出现"  #0: MINI6410"这样的提示呢？

我用的LCD 7寸的，LCD-type应该是LCD-Type = A70,

下面的是FriendlyARM.ini配置文件，请帮忙看image刷错了吗？
LCD-Mode = Yes
LCD-Type = A70

CheckOneButton=No
Action=install
OS= Linux

VerifyNandWrite=No

StatusType = Beeper| LED
#################### Linux #####################
Linux-BootLoader = superboot-20110727.bin
Linux-Kernel = Linux/zImage_a70
Linux-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs init=/linuxrc console=ttySAC0,115200
Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4-mlc2.ubi
Linux-RootFs-RunImage = Linux/rootfs_qtopia_qt4.ext3

################### Android ####################
Android-BootLoader = superboot-20110727.bin
Android-Kernel = Android/azImage_a70
Android-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs  init=/linuxrc console=ttySAC0,115200 androidboot.console=s3c2410_serial0
Android-RootFs-InstallImage = Android/rootfs_android-mlc2.ubi
Android-RootFs-RunImage = Android/rootfs_android.ext3

搞定了，原因是我的Nand Flash是SLC，我以为是MLC2的。改过来就可以了。

你好版主  我想请问一下我的超级终端显示烧写成功 但是我开机就会出现花屏 是什么情况