新买的Tiny6410的板子，USB摄像头也是新买的，无法识别摄像头，请问要怎么去弄？
a）是摄像头在Ubuntu10.04LTS(2.6.32-35)的信息，可以正常使用，要怎么把这个可以用的驱动移植到Tiny6410上？或者有什么其他的办法？
b）是摄像头在Tiny6410（2.6.38）的信息，无法使用。
a)
[ 7457.870544] usb 1-2: new high speed USB device using ehci_hcd and address 13
[ 7458.432536] usb 1-2: device not accepting address 13, error -71
[ 7458.552527] usb 1-2: new high speed USB device using ehci_hcd and address 14
[ 7458.751186] usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 32, changing to 9
[ 7458.784397] usb 1-2: configuration #1 chosen from 1 choice
[ 7458.796132] uvcvideo: Found UVC 1.00 device USB Video Class (04d6:205c)
[ 7459.792671] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 7459.793351] input: USB Video Class as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input7
b)
usb 1-1.1: new full speed USB device using s3c2410-ohci and address 7
usb 1-1.1: New USB device found, idVendor=04d6, idProduct=205c
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: USB Video Class
usb 1-1.1: Manufacturer: Anyka(Guangzhou)
usb 1-1.1: SerialNumber: AK3631L
uvcvideo: Found UVC 1.00 device USB Video Class (04d6:205c)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
uvcvideo: Failed to query (129) UVC probe control : -62 (exp. 26).
uvcvideo: Failed to initialize the device (-5).
