仲么回事，我刚买回来的tiny6410启动自带Linux失败

s2已经拨到nand了



UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 85:0, read 64 bytes
s3c-nand: 4 bit(s) error detected, corrected successfully
s3c-nand: 8 bit(s) error detected, corrected successfully
s3c-nand: 4 bit(s) error detected, corrected successfully
s3c-nand: 6 bit(s) error detected, corrected successfully
s3c-nand: 6 bit(s) error detected, corrected successfully
s3c-nand: 7 bit(s) error detected, corrected successfully
s3c-nand: 4 bit(s) error detected, corrected successfully
s3c-nand: 5 bit(s) error detected, corrected successfully
s3c-nand: ECC uncorrectable error detected
s3c-nand: ECC uncorrectable error detected
s3c-nand: ECC uncorrectable error detected
s3c-nand: ECC uncorrectable error detected
s3c-nand: ECC uncorrectable error detected
s3c-nand: ECC uncorrectable error detected
s3c-nand: ECC uncorrectable error detected




ALSA device list:
  #0: MINI6410
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-08 23:23:32 UTC (947373812)
Freeing init memory: 1408K
mount: mounting ubi0:FriendlyARM-root on /r failed: No such device
1Wire touchscreen OK
/init: line 103: can't open /r/dev/console: no such file
Kernel panic - not syncing: Attempted to kill init!
[<c0177c44>] (unwind_backtrace+0x0/0xe4) from [<c05147a8>] (panic+0x58/0x174)
[<c05147a8>] (panic+0x58/0x174) from [<c0189e48>] (do_exit+0x68/0x5e4)
[<c0189e48>] (do_exit+0x68/0x5e4) from [<c018a688>] (do_group_exit+0x90/0xc4)
[<c018a688>] (do_group_exit+0x90/0xc4) from [<c018a6cc>] (sys_exit_group+0x10/0x18)
[<c018a6cc>] (sys_exit_group+0x10/0x18) from [<c01725e0>] (ret_fast_syscall+0x0/0x30)
one_wire_status: 2

重刷固件估计就行
（PS：我只是个普通用户，不是友善的工程师）

请问ls如何重刷固件
他不认我的sd卡
烧不了uboot

开发6410 sd卡是必须的，建议从代理处购买经过验证可用的，可以免除很多麻烦

我也遇到了同样的问题！！SD卡买的金士顿专卖店的，验证也是正品。怎么回事啊？？
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
asoc: wm9713-hifi <-> samsung-ac97 mapping ok
ALSA device list:
  #0: MINI6410
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2011-10-26 10:12:32 UTC (1319623952
)
Freeing init memory: 1408K
mount: mounting ubi0:FriendlyARM-root on /r failed: No such device
1Wire touchscreen OK
/init: line 103: can't open /r/dev/console: no such file
Kernel panic - not syncing: Attempted to kill init!
[<c0177c44>] (unwind_backtrace+0x0/0xe4) from [<c0514804>] (panic+0x58/0x174)
[<c0514804>] (panic+0x58/0x174) from [<c0189e48>] (do_exit+0x68/0x5e4)
[<c0189e48>] (do_exit+0x68/0x5e4) from [<c018a688>] (do_group_exit+0x90/0xc4)
[<c018a688>] (do_group_exit+0x90/0xc4) from [<c018a6cc>] (sys_exit_group+0x10/0x
18)
[<c018a6cc>] (sys_exit_group+0x10/0x18) from [<c01725e0>] (ret_fast_syscall+0x0/
0x30)

引用第4楼feiying21356于2011-10-26 10:36发表的  :
我也遇到了同样的问题！！SD卡买的金士顿专卖店的，验证也是正品。怎么回事啊？？
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
asoc: wm9713-hifi <-> samsung-ac97 mapping ok
ALSA device list:
.......

你的烧写配置文件可能不对