麻烦各位达人帮忙看看。。。。感激不尽。。。调了两天了。。
先用加载.ko文件
[root@FriendlyARM /mjpg-streamer]# insmod vntwusb.ko
VIA Networking Wireless LAN USB Driver Ver. 1.20.03
VIA Networking Wireless LAN USB Driver Ver. 1.20.03
Copyright (c) 2004 VIA Networking Technologies, Inc.
usb 1-1: reset full speed USB device using s3c2410-ohci and address 2
usbcore: registered new interface driver vntwusb
插入vt6656网卡的时候显示
[root@FriendlyARM /mjpg-streamer]# usb 1-1: USB disconnect, address 2
usb 1-1: new full speed USB device using s3c2410-ohci and address 3
usb 1-1: New USB device found, idVendor=160a, idProduct=3184
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: VNT USB-802.11 Wireless LAN Adapter
usb 1-1: Manufacturer: VIA Networking Technologies, Inc.
usb 1-1: configuration #1 chosen from 1 choice
VIA Networking Wireless LAN USB Driver Ver. 1.20.03
Copyright (c) 2004 VIA Networking Technologies, Inc.
usb 1-1: reset full speed USB device using s3c2410-ohci and address 3
然后设置ifconfig eth1 up
之前都通过了 在设置 无线网卡 essid 的时候一直说没法找到,Alex是我电脑上设的无线的名称.
[root@FriendlyARM /mjpg-streamer]# iwconfig eth1 essid "Alex"
[root@FriendlyARM /mjpg-streamer]# Scanning [Alex] not found, disconnected !
Scanning [Alex] not found, disconnected !
Scanning [Alex] not found, disconnected !
Scanning [Alex] not found, disconnected !
Scanning [Alex] not found, disconnected !
Scanning [Alex] not found, disconnected !
Scanning [Alex] not found, disconnected !
但是之前用iwlist 找的时候可以找的到Alex
iwlist scanning
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
eth1 Scan completed :
Cell 01 - Address: 2E:70:1A:D4:8E:BB
ESSID:"Alex"
Mode:Ad-Hoc
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=100/100 Signal level=-18 dBm Noise level=0 dBm
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:bcn_int=100
虚心求教各位前辈..........这是什么原因?已经调了两天了 笔记本上的无线设的wep模式 Ad-Hoc .....谢谢大家........
