mini2440烧写完WINCE 的NK 后,将开关达到NAND时候,出现黑屏(没任何反应)

步骤如下:
1:从NAND进入BIOS选择Enter your selection: f    格式化NAND
2:Enter your selection: n
USB host is connected. Waiting a download.

Now, Downloading [ADDRESS:30000000h,TOTAL:2906]
RECEIVED FILE SIZE:    2906 (2KB/S, 1S)
Downloaded file at 0x30000000, size = 2896 bytes
Erase flash ok: start address = 0x0, size = 0x20000
Write to flash ok: start address = 0x0, size = 0xb50
nboot文件  nboot-20110414文件夹
然后我选择Enter your selection: w
Clear the free memory
Please send the Image through USB.
Download Address=0x80200000  Length=0x19fbb2c
start wince
烧完后板子自动进入WINCE 系统,然后我把开关打到NAND后重启发现屏幕黑的.
那个帮帮我,是什么会事情

这是因为你使用的supervivi可能太老了，请下载mini2440最新光盘，并更新 supervivi in NOR Flash

在烧写WINCE后出现串口出现 Start Windows CE...我能够进入看到屏幕出现的WINCE 系统 这时候DWN 显示[USB:X]不知道是否正常
Enter your selection: w
Clear the free memory
Please send the Image through USB.
Download Address=0x80200000  Length=0x19fbb2c
............................Done.
Low Level Format: Start = 0x1300, Num = 0x1fed00
....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Done.
Create Partition: Start = 0x1400, Num = 0xd000.
...............................................Done.
Create Partition: Start = 0xe400, Num = 0x1eee00.
...Done.
Start Windows CE...

下载最新版的VIVI    友善的supervivi-1026  下载后,情况依然是,将开关打倒NAND后串口段并没有加载WINCE的镜像 希望版主解决下

S2拨到 NOR一侧，启动系统，把此时的串口输出发来看看

##### FriendlyARM BIOS 2.0 for 2440 #####

[x] format NAND FLASH for Linux

[v] Download vivi

[k] Download linux kernel

[y] Download root_yaffs image

[a] Absolute User Application

[n] Download Nboot for WinCE

[l] Download WinCE boot-logo

[w] Download WinCE NK.bin

[d] Download & Run

[z] Download zImage into RAM

[g] Boot linux from RAM

[f] Format the nand flash

Boot the system

[s] Set the boot parameters

Backup NAND Flash to HOST through USB(upload)

[r] Restore NAND Flash from HOST through USB

[q] Goto shell of vivi

Version: 0945-2K

Enter your selection:

你烧写的nk是什么日期版本的

我的NK 是用 光盘中的PB工程,编译后得到的,NK是没问题的,在串口出现START WINCE 后 板子上出现了WINCE 这时我把S2打到NAND这边然后重启后,就没反应了

BSP的版本mini2440-ce5-bsp-20100202

现在开关在NOR这端
Enter your selection: w
Clear the free memory
Please send the Image through USB.
Download Address=0x80200000  Length=0x19fbb40
............................Done.
Low Level Format: Start = 0x1300, Num = 0x1fed00
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
....................Done.
Create Partition: Start = 0x1400, Num = 0xd000.
...............................................Done.
Create Partition: Start = 0xe400, Num = 0x1eee00.
...Done.
Start Windows CE.

这时候板子上能看到WINCE 的操作系统