Enter your Selection:q
MINI6410 # nand scrub
NAND scrub: device 0 whole chip
Warning: scrub option will erase all factory set bad blocks!
There is no reliable way to recover them.
Use this command only for testing purposes if you
are sure of what you are doing!
Really scrub this NAND flash? <y/N>
Erasing at 0x11e0000 -- 7% complete.
NAND 256MiB 3,3V 8-bit: MTD Erase failure: -5
Erasing at 0x70a0000 -- 44% complete.
NAND 256MiB 3,3V 8-bit: MTD Erase failure: -5
Erasing at 0xffe0000 -- 100% complete.
Scanning device for bad blocks
s3c-nand: ECC uncorrectable error detected
s3c-nand: ECC uncorrectable error detected
s3c-nand: ECC uncorrectable error detected
s3c-nand: ECC uncorrectable error detected
OK
MINI6410 #
