Running OS 'LINUX'
Loading kernel...
Load kernel succeed
Start Linux kernel...
Uncompressing Linux....................................................................................................................................................................................... done, booting the kernel.
Linux version 2.6.28.6-FriendlyARM (root@tom) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #4 Wed Jul 21 16:30:44 CST 2010
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: SMDK6410
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C64XX: PLL settings, A=532000000, M=266000000, E=84666666
S3C64XX: HCLKx2=266000000, HCLK=133000000, PCLK=66500000
div1: 00000555
mout_apll: source is fout_apll (1), rate is 532000000
mout_epll: source is fout_epll (1), rate is 84666666
mout_mpll: source is mpll (1), rate is 266000000
mmc_bus: source is dout_mpll (1), rate is 22166666
mmc_bus: source is dout_mpll (1), rate is 22166666
mmc_bus: source is dout_mpll (1), rate is 22166666
usb-host-bus: source is mout_epll (0), rate is 84666666
uclk1: source is mout_epll (0), rate is 84666666
spi-bus: source is mout_epll (0), rate is 84666666
spi-bus: source is mout_epll (0), rate is 84666666
audio-bus0: source is mout_epll (0), rate is 84666666
audio-bus1: source is mout_epll (0), rate is 84666666
audio-bus2: source is mout_epll (0), rate is 84666666
irda-bus: source is mout_epll (0), rate is 84666666
s3c64xx: 15728640 bytes SDRAM reserved for fimc at 0x506ed000
s3c64xx: 8388608 bytes SDRAM reserved for pp at 0x515ed000
s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x51ded000
s3c64xx: 6291456 bytes SDRAM reserved for mfc at 0x525ed000
s3c64xx: 8388608 bytes SDRAM reserved for jpeg at 0x52bed000
s3c64xx: 8388608 bytes SDRAM reserved for cmm at 0x533ed000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: root=/dev/mtdblock2 rootfstype=yaffs2 init=/linuxrc console=ttySAC0,115200 run_fs_image=/images/Linux/rootfs_qtopia_qt4_new.ext3
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
s3c24xx_serial_init_ports: initialising ports=4...
console [ttySAC0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 69460KB available (4544K code, 543K data, 908K init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 530.84 BogoMIPS (lpj=1327104)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 316 bytes
NET: Registered protocol family 16
S3C6410: Initialising architecture
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
Total 32 DMA channels will be initialized.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
yaffs Jul 21 2010 15:27:21 Installing.
msgmni has been set to 135
io scheduler noop registered (default)
S3C_LCD clock got enabled :: 133.000 Mhz
LCD TYPE :: LTE480WV will be initialized
Window[0] - FB1: map_video_memory: clear ff000000:00177000
FB1: map_video_memory: dma=57400000 cpu=ff000000 size=00177000
Window[0] - FB2: map_video_memory: clear ff0bb800:000bb800
FB2: map_video_memory: dma=574bb800 cpu=ff0bb800 size=000bb800
Console: switching to colour frame buffer device 100x30
fb0: s3cfb frame buffer device
Window[1] - FB1: map_video_memory: clear ff177000:00177000
FB1: map_video_memory: dma=57600000 cpu=ff177000 size=00177000
Window[1] - FB2: map_video_memory: clear ff232800:000bb800
FB2: map_video_memory: dma=576bb800 cpu=ff232800 size=000bb800
fb1: s3cfb frame buffer device
Window[2] - FB1: map_video_memory: clear ff2ee000:000bb800
FB1: map_video_memory: dma=57300000 cpu=ff2ee000 size=000bb800
fb2: s3cfb frame buffer device
Window[3] - FB1: map_video_memory: clear ff3aa000:000bb800
FB1: map_video_memory: dma=57800000 cpu=ff3aa000 size=000bb800
fb3: s3cfb frame buffer device
backlight initialized
leds initialized
buttons initialized
pwm initialized
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
loop: module loaded
dm9000 Ethernet Driver
dm9000: dm9000_probe, init GPIO/EINT.
dm9000: dm9000_probe2
dm9000: dm9000_probe3
eth0: dm9000 at f7b00300,f7b00304 IRQ 108 MAC: 08:90:90:90:90:90
Linux video capture interface: v2.00
em28xx v4l2 driver version 0.1.0 loaded
usbcore: registered new interface driver em28xx
usbcore: registered new interface driver usbvision
USBVision USB Video Device Driver for Linux : 0.9.9
usbcore: registered new interface driver pvrusb2
pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
pvrusb2: Debug mask is 31 (0x1f)
usbcore: registered new interface driver zr364xx
zr364xx: Zoran 364xx
usbcore: registered new interface driver stkwebcam
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
usbcore: registered new interface driver sn9c102
et61x251: V4L2 driver for ET61X[12]51 PC Camera Controllers v1:1.09
usbcore: registered new interface driver et61x251
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
usbcore: registered new interface driver zc0301
gspca: main v2.3.0 registered
usbcore: registered new interface driver conex
conex: registered
usbcore: registered new interface driver etoms
etoms: registered
usbcore: registered new interface driver finepix
finepix: registered
usbcore: registered new interface driver mars
mars: registered
usbcore: registered new interface driver ov519
ov519: registered
usbcore: registered new interface driver pac207
pac207: registered
usbcore: registered new interface driver pac7311
pac7311: registered
usbcore: registered new interface driver sonixb
sonixb: registered
usbcore: registered new interface driver sonixj
sonixj: registered
usbcore: registered new interface driver spca500
spca500: registered
usbcore: registered new interface driver spca501
spca501: registered
usbcore: registered new interface driver spca505
spca505: registered
usbcore: registered new interface driver spca506
spca506: registered
usbcore: registered new interface driver spca508
spca508: registered
usbcore: registered new interface driver spca561
spca561: registered
usbcore: registered new interface driver sunplus
sunplus: registered
usbcore: registered new interface driver stk014
stk014: registered
usbcore: registered new interface driver t613
t613: registered
usbcore: registered new interface driver tv8532
tv8532: registered
usbcore: registered new interface driver vc032x
vc032x: registered
usbcore: registered new interface driver zc3xx
zc3xx: registered
usbcore: registered new interface driver ALi m5602
ALi m5602: registered
usbcore: registered new interface driver s2255
s3c-fimc: controller 0 registered successfully
s3c-fimc: controller 1 registered successfully
S3C6400 MFC Driver, (c) 2007 Samsung Electronics
S3C6400 MFC Driver, (c) 2007 Samsung Electronics
S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics
S3C6410 TV encoder Driver, (c) 2008 Samsung Electronics
S3C6410 TV encoder Driver init OK.
S3C6410 TV scaler Driver, (c) 2008 Samsung Electronics
S3C6410 TV scaler Driver init OK.
S3C Rotator Driver, (c) 2008 Samsung Electronics
s3c_rotator_probe called
s3c_rotator_probe success
S3C JPEG Driver, (c) 2007 Samsung Electronics
s3c_g2d_probe called
s3c_g2d_probe Success
S3C G2D Init : Done
S3C G3D Driver, (c) 2007-2009 Samsung Electronics
s3c_g3d version : 0x1050000
S3C G3D Init : Done
S3C CMM Driver, (c) 2008 Samsung Electronics
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Driver 'sd' needs updating - please use bus_type methods
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x00000000-0x00080000 : "Bootloader"
0x00080000-0x00580000 : "Kernel"
0x00580000-0x10000000 : "File System"
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: S3C24XX OHCI
usb usb1: Manufacturer: Linux 2.6.28.6-FriendlyARM ohci_hcd
usb usb1: SerialNumber: s3c24xx
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
mice: PS/2 mouse device common for all mice
S3C Touchscreen driver, (c) 2008 Samsung Electronics
S3C TouchScreen got loaded successfully : 12 bits
input: S3C TouchScreen as /class/input/input0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410_rtc: tick irq 34, alarm irq 92
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 377 KHz
parent clock for camera: 266.000 MHz, divisor: 11
[CAM]RESET CAM.<7>hub 1-0:1.0: state 7 ports 2 chg 0004 evt 0000
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (22166666 Hz)
[SDHCI]to add external irq as a card detect signal......
[SDHCI]if (pdata->cfg_ext_cd)......
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[SDHCI]request_irq......
sdhci: card inserted.
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
ASoC version 0.13.2
WM9713/WM9714 SoC Audio Codec 0.15
playback: 1, capture : 1
asoc: AC97 HiFi <-> s3c64xx-ac97 mapping ok
mmc0: new SDHC card at address ca55
mmcblk0: mmc0:ca55 SD04G 3.69 GiB
mmcblk0:<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c75fcc00,0xa300,0x0000,0x0002,c70addd0,0004)
ALSA device list:
#0: SMDK6400 (WM9713)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: setting system clock to 2010-10-20 22:13:11 UTC (1287612791)
Freeing init memory: 908K
mount: mounting /dev/mmcblk0p1 on /sdcard failed: No such device or address
Waiting SD Card...
mount: mounting /dev/mmcblk0p1 on /sdcard failed: No such device or address
Waiting SD Card...
mount: mounting /dev/mmcblk0p1 on /sdcard failed: No such device or address
Waiting SD Card...
mount: mounting /dev/mmcblk0p1 on /sdcard failed: No such device or address
Waiting SD Card...
mount: mounting /dev/mmcblk0p1 on /sdcard failed: No such device or address
Waiting SD Card...
losetup: /dev/loop0: No such file or directory
bio too big device loop0 (2 > 0)
EXT3-fs: unable to read superblock
mount: mounting /dev/loop0 on /r failed: Invalid argument
mount: mounting /sdcard on /r/sdcard failed: No such file or directory
/init: line 66: can't open /r/dev/console: no such file
Kernel panic - not syncing: Attempted to kill init!
