安装linux时按照说明一步一步来，
##### FriendlyARM BIOS 2.0 for 2440 #####
[x] format NAND FLASH for Linux
[v] Download vivi
[k] Download linux kernel
[y] Download root_yaffs image
[a] Absolute User Application
[n] Download Nboot for WinCE
[l] Download WinCE boot-logo
[w] Download WinCE NK.bin
[d] Download & Run
[z] Download zImage into RAM
[g] Boot linux from RAM
[f] Format the nand flash
Boot the system
[s] Set the boot parameters
Backup NAND Flash to HOST through USB(upload)
[r] Restore NAND Flash from HOST through USB
[q] Goto shell of vivi
Version: 0945-2K
Enter your selection:
1.首先是格式化：f
是一堆点点，应该是格式化成功了吧，因为NAND启动白屏了。
2.再然后格式化为linux系统：x
结果为：Writing... ... done
Written 49152 bytes
Saved vivi private data 貌似没事。
3.downloadvv一下：v
选择supervivi-64M
结果为：Erasing... ... done
Writing... ... done
Written 256348 bytes 貌似没事。
4.[k] Download linux kernel
选择zImage_T35
结果为：Erasing... ... done
Writing... ... done
Written 2022348 bytes
5.最后[y] Download root_yaffs image
选择root_qtopia-64M.img
结果为：Load yaffs OK:
Blocks scanned: 980, Blocks erased: 979, Blocks are bad: 1
RECEIVED and Writed FILE SIZE:51505882 (620KB/S, 81S)
最后，nand启动：停留在开机界面，大鸟在屏幕左上角，然后超级终端的监控就停留在下面的错误提示上了。
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:3.
Freeing init memory: 128K
Warning: unable to open an initial console.
Failed to execute /linuxrc. Attempting defaults...
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
大虾们救救火啊，装wince5.0没事情，但是想弄弄linux。
期盼ing
