Load Kernel...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.8-FriendlyARM (root@linux-desktop) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #4 PREEMPT Wed Nov 18 15:20:05 CST 2015
[ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: MINI210
[ 0.000000] MINI210: S70D selected
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
[ 0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
[ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
[ 0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_g3d: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] s5p: 36864 kbytes system memory reserved for mfc at 0x2dc00000, 0-bank base(0x2dc00000)
[ 0.000000] s5p: 36864 kbytes system memory reserved for mfc at 0x3dbf6000, 1-bank base(0x3dbf6000)
[ 0.000000] s5p: 6144 kbytes system memory reserved for fimc0 at 0x3d5f6000, 1-bank base(0x3d5f6000)
[ 0.000000] s5p: 16 kbytes system memory reserved for fimc1 at 0x3d5f2000, 1-bank base(0x3d5f2000)
[ 0.000000] s5p: 6144 kbytes system memory reserved for fimc2 at 0x3cff2000, 1-bank base(0x3cff2000)
[ 0.000000] s5p: 8192 kbytes system memory reserved for jpeg at 0x2d400000, 0-bank base(0x2d400000)
[ 0.000000] s5p: 13060 kbytes system memory reserved for fimd at 0x3c331000, 1-bank base(0x3c331000)
[ 0.000000] s5p: 8192 kbytes system memory reserved for g2d at 0x2cc00000, 0-bank base(0x2cc00000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 101179
[ 0.000000] Kernel command line: console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.254:/home/linux/nfs/rootfs_mini210 ip=192.168.0.10:192.168.0.254:19D
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 204MB 195MB 0MB = 399MB total
[ 0.000000] Memory: 394520k/509996k available, 14292k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfd000000 ( 456 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0173000 (1452 kB)
[ 0.000000] .text : 0xc0173000 - 0xc08d343c (7554 kB)
[ 0.000000] .data : 0xc08d4000 - 0xc092d9c0 ( 359 kB)
[ 0.000000] .bss : 0xc092d9e4 - 0xc097bd98 ( 313 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:393
[ 0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
[ 0.000000] sched_clock: 32 bits at 33MHz, resolution 29ns, wraps every 128784ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttySAC0] enabled
[ 0.440282] Calibrating delay loop... 997.78 BogoMIPS (lpj=2494464)
[ 0.469998] pid_max: default: 32768 minimum: 301
[ 0.470161] Mount-cache hash table entries: 512
[ 0.470492] Initializing cgroup subsys debug
[ 0.470534] Initializing cgroup subsys cpuacct
[ 0.470580] Initializing cgroup subsys freezer
[ 0.472600] CPU: Testing write buffer coherency: ok
[ 0.480153] print_constraints: dummy:
[ 0.481285] NET: Registered protocol family 16
[ 0.490775] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.497294] fimd at 0x3c331000
[ 0.497374] hsmmc0: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.501135] hsmmc1: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.507426] hsmmc2: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.513600] hsmmc3: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.520631] S5PV210: Initializing architecture
[ 0.524876] s3c-adc s5pv210-adc: attached adc driver
[ 0.529346] s3c24xx-pwm s3c24xx-pwm.0: tin at 33350000, tdiv at 33350000, tin=divclk, base 0
[ 0.537976] print_constraints: pd_tv_supply: 5000 mV normal
[ 0.543381] print_constraints: pd_lcd_supply: 5000 mV normal
[ 0.549104] print_constraints: pd_g3d_supply: 5000 mV normal
[ 0.554806] print_constraints: pd_mfc_supply: 5000 mV normal
[ 0.560534] print_constraints: pd_audio_supply: 5000 mV normal
[ 0.594788] bio: create slab <bio-0> at 0
[ 0.596279] SCSI subsystem initialized
[ 0.598075] usbcore: registered new interface driver usbfs
[ 0.598365] usbcore: registered new interface driver hub
[ 0.598561] usbcore: registered new device driver usb
[ 0.599117] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.601077] s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz
[ 0.607637] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.612395] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 0.617381] s3c-i2c s3c2440-i2c.1: bus frequency set to 65 KHz
[ 0.623420] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.628581] s3c-i2c s3c2440-i2c.2: slave address 0x10
[ 0.633564] s3c-i2c s3c2440-i2c.2: bus frequency set to 378 KHz
[ 0.639818] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.645389] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.651953] Switching to clocksource s5p_clocksource_timer
[ 0.660000] Switched to NOHz mode on CPU #0
[ 0.668898] NET: Registered protocol family 2
[ 0.669090] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.672931] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.679479] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.686110] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.692311] TCP reno registered
[ 0.695419] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.701337] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.707859] NET: Registered protocol family 1
[ 0.712228] RPC: Registered named UNIX socket transport module.
[ 0.717913] RPC: Registered udp transport module.
[ 0.722553] RPC: Registered tcp transport module.
[ 0.727230] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.742809] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.742943] PMU: registered new PMU device of type 0
[ 0.745384] cpuidle: phy_regs_save:0x3bf33000
[ 0.749658] Loaded driver for PL330 DMAC-0 s3c-pl330
[ 0.754363] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
[ 0.760497] Loaded driver for PL330 DMAC-1 s3c-pl330
[ 0.765363] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.771508] Loaded driver for PL330 DMAC-2 s3c-pl330
[ 0.776369] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.790549] ashmem: initialized
[ 0.804145] Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
[ 0.805386] NTFS driver 2.1.30 [Flags: R/W].
[ 0.805886] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.806159] msgmni has been set to 770
[ 0.807229] io scheduler noop registered
[ 0.807982] io scheduler deadline registered
[ 0.812434] io scheduler cfq registered (default)
[ 0.816941] start plist test
[ 0.822491] end plist test
[ 0.823268] s3cfb s3cfb: win 2: pmem_start=0x3c796000
[ 0.827530] s3cfb s3cfb: [fb2] dma: 0x3c796000, cpu: 0xe1000000, size: 0x0085c000
[ 0.846436] Console: switching to colour frame buffer device 100x30
[ 0.851522] FIMD src sclk = 166750000
[ 0.851593] s3cfb s3cfb: registered successfully
[ 0.851634] Start display and show logo
[ 0.858624] s5pv210-uart.0: ttySAC0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
[ 0.861934] s5pv210-uart.1: ttySAC1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
[ 0.876702] s5pv210-uart.2: ttySAC2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
[ 0.886713] s5pv210-uart.3: ttySAC3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
[ 0.897162] leds initialized
[ 0.897328] buttons initialized
[ 0.897513] pwm initialized
[ 0.897712] mini210-adc initialized
[ 0.898001] backlight initialized
[ 0.899336] PA FB = 0x3C796000, bits per pixel = 32
[ 0.903440] screen width=800 height=480 va=0xdc796000 pa=0x3c796000
[ 0.909696] xres_virtual = 800, yres_virtual = 1440, xoffset = 0, yoffset = 0
[ 0.916756] fb_size=8765440
[ 0.919513] Back frameBuffer[0].VAddr=dc90d000 PAddr=3c90d000 size=1536000
[ 0.926381] Back frameBuffer[1].VAddr=dca84000 PAddr=3ca84000 size=1536000
[ 0.933226] Video Y Buffer[0].VAddr=dcbfb000 PAddr=3cbfb000 size=921600
[ 0.939800] Video Y Buffer[1].VAddr=dccdc000 PAddr=3ccdc000 size=921600
[ 0.946388] Video Y Buffer[2].VAddr=dcdbd000 PAddr=3cdbd000 size=921600
[ 0.952973] Video UV Buffer[0].VAddr=dce9e000 PAddr=3ce9e000 size=462848
[ 0.959644] Video UV Buffer[1].VAddr=dcf0f000 PAddr=3cf0f000 size=462848
[ 0.966320] Video UV Buffer[2].VAddr=dcf80000 PAddr=3cf80000 size=462848
[ 0.979330] brd: module loaded
[ 0.982861] loop: module loaded
[ 0.983930] S3C NAND Driver, (c) 2008 Samsung Electronics
[ 1.115811] S3C NAND Driver is using hardware ECC.
[ 1.115888] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
[ 1.115967] Creating 5 MTD partitions on "s5pv210-nand":
[ 1.116019] 0x0000000c0000-0x000000100000 : "misc"
[ 1.117853] 0x000000100000-0x000000600000 : "recovery"
[ 1.124455] 0x000000600000-0x000000b00000 : "kernel"
[ 1.129403] 0x000000b00000-0x000000e00000 : "ramdisk"
[ 1.133733] 0x000000e00000-0x000040000000 : "system"
[ 1.492665] PPP generic driver version 2.4.2
[ 1.492965] PPP Deflate Compression module registered
[ 1.493010] PPP BSD Compression module registered
[ 1.493466] PPP MPPE Compression module registered
[ 1.493509] NET: Registered protocol family 24
[ 1.494949] tun: Universal TUN/TAP device driver, 1.6
[ 1.498632] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 1.504956] dm9000 Ethernet Driver, V1.31
[ 1.509931] eth0: dm9000a at e0838000,e083c00c IRQ 39 MAC: 08:90:00:a0:02:10 (platform data)
[ 1.517434] usbcore: registered new interface driver dm9620
[ 1.522811] sdhci: Secure Digital Host Controller Interface driver
[ 1.528853] sdhci: Copyright(c) Pierre Ossman
[ 1.533222] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
[ 1.539763] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
[ 1.546556] mmc0: no vmmc regulator found
[ 1.550790] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[ 1.557574] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
[ 1.564110] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
[ 1.570890] mmc1: no vmmc regulator found
[ 1.577204] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[ 1.581917] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
[ 1.588458] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
[ 1.598312] mmc2: no vmmc regulator found
[ 1.599526] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[ 1.606265] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
[ 1.614822] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
[ 1.619587] mmc3: no vmmc regulator found
[ 1.623816] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[ 1.633824] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.637297] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 1.642325] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.651376] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
[ 1.664718] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 1.665409] hub 1-0:1.0: USB hub found
[ 1.665457] hub 1-0:1.0: 1 port detected
[ 1.667981] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.673846] s5p-ohci s5p-ohci: EXYNOS OHCI Host Controller
[ 1.681223] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
[ 1.686218] s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
[ 1.746221] hub 2-0:1.0: USB hub found
[ 1.746270] hub 2-0:1.0: 1 port detected
[ 1.747029] usbcore: registered new interface driver usbserial
[ 1.747199] USB Serial support registered for generic
[ 1.747381] usbcore: registered new interface driver usbserial_generic
[ 1.748917] usbserial: USB Serial Driver core
[ 1.756528] USB Serial support registered for aircable
[ 1.758537] usbcore: registered new interface driver aircable
[ 1.764223] USB Serial support registered for ark3116
[ 1.771311] usbcore: registered new interface driver ark3116
[ 1.774782] ark3116:v0.6:USB ARK3116 serial/IrDA driver
[ 1.780057] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 1.791444] usbcore: registered new interface driver belkin
[ 1.793737] belkin_sa: v1.3:USB Belkin Serial converter driver
[ 1.799661] USB Serial support registered for ch341-uart
[ 1.806989] usbcore: registered new interface driver ch341
[ 1.810382] USB Serial support registered for cp210x
[ 1.815375] usbcore: registered new interface driver cp210x
[ 1.820800] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[ 1.830766] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 1.835213] usbcore: registered new interface driver cyberjack
[ 1.840915] cyberjack: v1.01 Matthias Bruestle
[ 1.847363] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[ 1.853022] USB Serial support registered for DeLorme Earthmate USB
[ 1.859284] USB Serial support registered for HID->COM RS232 Adapter
[ 1.865616] USB Serial support registered for Nokia CA-42 V2 Adapter
[ 1.872022] usbcore: registered new interface driver cypress
[ 1.878490] cypress_m8: v1.10:Cypress USB to Serial Driver
[ 1.885026] USB Serial support registered for Digi 2 port USB adapter
[ 1.889453] USB Serial support registered for Digi 4 port USB adapter
[ 1.895884] usbcore: registered new interface driver digi_acceleport
[ 1.902087] digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
[ 1.910401] USB Serial support registered for Edgeport 2 port adapter
[ 1.916852] USB Serial support registered for Edgeport 4 port adapter
[ 1.923248] USB Serial support registered for Edgeport 8 port adapter
[ 1.929820] USB Serial support registered for EPiC device
[ 1.935055] usbcore: registered new interface driver io_edgeport
[ 1.940919] io_edgeport: v2.7:Edgeport USB Serial Driver
[ 1.946285] USB Serial support registered for Edgeport TI 1 port adapter
[ 1.952961] USB Serial support registered for Edgeport TI 2 port adapter
[ 1.961654] usbcore: registered new interface driver io_ti
[ 1.964997] io_ti: v0.7mode043006:Edgeport USB Serial Driver
[ 1.970702] USB Serial support registered for empeg
[ 1.975600] usbcore: registered new interface driver empeg
[ 1.980948] empeg: v1.3:USB Empeg Mark I/II Driver
[ 1.985710] usb 1-1: new high speed USB device number 2 using s5p-ehci
[ 1.993292] USB Serial support registered for FTDI USB Serial Device
[ 2.000810] usbcore: registered new interface driver ftdi_sio
[ 2.004263] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 2.010159] USB Serial support registered for funsoft
[ 2.015207] usbcore: registered new interface driver funsoft
[ 2.020827] USB Serial support registered for Garmin GPS usb/tty
[ 2.026824] usbcore: registered new interface driver garmin_gps
[ 2.032600] garmin_gps: v0.36:garmin gps driver
[ 2.037201] USB Serial support registered for hp4X
[ 2.041982] usbcore: registered new interface driver hp4X
[ 2.047243] hp4x: v1.00:HP4x (48/49) Generic Serial driver
[ 2.052934] USB Serial support registered for PocketPC PDA
[ 2.058321] usbcore: registered new interface driver ipaq
[ 2.063522] ipaq: v1.0:USB PocketPC PDA driver
[ 2.070027] USB Serial support registered for IPWireless converter
[ 2.074206] usbcore: registered new interface driver ipwtty
[ 2.079637] ipw: v0.4:IPWireless tty driver
[ 2.083886] USB Serial support registered for IR Dongle
[ 2.089127] usbcore: registered new interface driver ir-usb
[ 2.095557] ir_usb: v0.5:USB IR Dongle driver
[ 2.100969] USB Serial support registered for iuu_phoenix
[ 2.104381] usbcore: registered new interface driver iuu_phoenix
[ 2.110266] iuu_phoenix: v0.12:Infinity USB Unlimited Phoenix driver
[ 2.116699] USB Serial support registered for Keyspan PDA
[ 2.122044] USB Serial support registered for Keyspan PDA - (prerenumeration)
[ 2.129146] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[ 2.137234] usbcore: registered new interface driver keyspan_pda
[ 2.143308] keyspan_pda: v1.1:USB Keyspan PDA Converter driver
[ 2.149074] hub 1-1:1.0: USB hub found
[ 2.152589] USB Serial support registered for KL5KUSB105D / PalmConnect
[ 2.159123] hub 1-1:1.0: 4 ports detected
[ 2.163309] usbcore: registered new interface driver kl5kusb105d
[ 2.169095] kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
[ 2.178688] USB Serial support registered for KOBIL USB smart card terminal
[ 2.183624] usbcore: registered new interface driver kobil
[ 2.189152] kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
[ 2.196816] USB Serial support registered for MCT U232
[ 2.201976] usbcore: registered new interface driver mct_u232
[ 2.208558] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
[ 2.216861] USB Serial support registered for Moschip 2 port adapter
[ 2.221060] mos7720: 2.1:Moschip USB Serial Driver
[ 2.225943] usbcore: registered new interface driver moschip7720
[ 2.231918] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 2.239286] mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
[ 2.245193] usbcore: registered new interface driver mos7840
[ 2.250814] USB Serial support registered for moto-modem
[ 2.256118] usbcore: registered new interface driver moto-modem
[ 2.261991] USB Serial support registered for navman
[ 2.266951] usbcore: registered new interface driver navman
[ 2.272493] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 2.279419] usbcore: registered new interface driver omninet
[ 2.284928] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[ 2.292758] USB Serial support registered for opticon
[ 2.295753] usbcore: registered new interface driver opticon
[ 2.301337] USB Serial support registered for GSM modem (1-port)
[ 2.307426] usbcore: registered new interface driver option
[ 2.312763] option: v0.7.2:USB Driver for GSM modems
[ 2.318786] USB Serial support registered for oti6858
[ 2.324842] usbcore: registered new interface driver oti6858
[ 2.328455] USB Serial support registered for pl2303
[ 2.333421] usbcore: registered new interface driver pl2303
[ 2.338837] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 2.344897] USB Serial support registered for qcaux
[ 2.349786] usbcore: registered new interface driver qcaux
[ 2.355236] USB Serial support registered for Qualcomm USB modem
[ 2.361247] usbcore: registered new interface driver qcserial
[ 2.366835] safe_serial: v0.1:USB Safe Encapsulated Serial
[ 2.372380] USB Serial support registered for safe_serial
[ 2.377796] usbcore: registered new interface driver safe_serial
[ 2.383729] USB Serial support registered for siemens_mpi
[ 2.389118] usbcore: registered new interface driver siemens_mpi
[ 2.397057] Driver for Siemens USB/MPI adapter
[ 2.399413] Version 0.1 09/26/2005 Thomas
Hergenhahn@web.de http://libnodave.sf.net[ 2.407142] USB Serial support registered for Sierra USB modem
[ 2.412978] usbcore: registered new interface driver sierra
[ 2.418410] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[ 2.426046] USB Serial support registered for SPCP8x5
[ 2.432067] usbcore: registered new interface driver spcp8x5
[ 2.435540] spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver
[ 2.441544] USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[ 2.449113] usbcore: registered new interface driver ssu100
[ 2.454530] ssu100: v0.1:Quatech SSU-100 USB to Serial Driver
[ 2.460337] USB Serial support registered for symbol
[ 2.465319] usbcore: registered new interface driver symbol
[ 2.470835] USB Serial support registered for TI USB 3410 1 port adapter
[ 2.477518] usb 1-1.2: new high speed USB device number 3 using s5p-ehci
[ 2.484158] USB Serial support registered for TI USB 5052 2 port adapter
[ 2.490926] usbcore: registered new interface driver ti_usb_3410_5052
[ 2.497189] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[ 2.505425] USB Serial support registered for Handspring Visor / Palm OS
[ 2.510078] USB Serial support registered for Sony Clie 3.5
[ 2.515642] USB Serial support registered for Sony Clie 5.0
[ 2.521254] usbcore: registered new interface driver visor
[ 2.526548] visor: USB HandSpring Visor / Palm OS driver
[ 2.532936] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 2.542175] USB Serial support registered for Connect Tech - WhiteHEAT
[ 2.546693] usbcore: registered new interface driver whiteheat
[ 2.552367] whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
[ 2.558081] USB Serial support registered for vivopay-serial
[ 2.563752] usbcore: registered new interface driver vivopay-serial
[ 2.569869] vivopay_serial: v1.0:ViVOpay USB Serial Driver
[ 2.575431] USB Serial support registered for zio
[ 2.580222] usbcore: registered new interface driver zio
[ 2.585436] usbcore: registered new interface driver usblp
[ 2.590772] Initializing USB Mass Storage driver...
[ 2.595774] usbcore: registered new interface driver usb-storage
[ 2.601591] USB Mass Storage support registered.
[ 2.606411] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
[ 2.606418] s3c-udc : version 15 March 2009 (DMA Mode)
[ 2.624612] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB511
[ 2.629597] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.635004] android_usb gadget: Number of LUNs=1
[ 2.639606] lun0: LUN: removable file: (no medium)
[ 2.644714] android_usb gadget: android_usb ready
[ 2.667778] Registered gadget driver 'android_usb'
[ 2.668115] mousedev: PS/2 mouse device common for all mice
[ 2.668625] touchscreen-1wire initialized
[ 2.668663] backlight-1wire initialized
[ 2.668752] setup_irq: ret = 0
[ 2.670169] PWM clock = 66700000
[ 2.673414] TCNT_FOR_SAMPLE_BIT = 3472, TCFG1 = 00000003
[ 2.679064] input: fa_ts_input as /devices/virtual/input/input0
[ 2.685075] ts-if initialized
[ 2.687988] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
[ 2.693015] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.698416] 4: TCNTB=00000d90, TCNTO=00000960, TINT_CSTAT=0000000c
[ 2.704519] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.709983] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.715434] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.720873] 4: TCNTB=00000d90, TCNTO=00000076, TINT_CSTAT=0000000c
[ 2.727040] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.732860] using rtc device, s3c, for alarms
[ 2.736653] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 2.743029] i2c /dev entries driver
[ 2.746989] Linux video capture interface: v2.00
[ 2.751040] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
[ 2.751046]
[ 2.762455] S3C JPEG Driver, (c) 2007 Samsung Electronics
[ 2.764537] JPEG driver for S5PV210
[ 2.768588] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[ 2.774571] S5PC11X HPD Driver, (c) 2010 Samsung Electronics
[ 2.780411] S5PC11X CEC Driver, (c) 2010 Samsung Electronics
[ 2.786635] usbcore: registered new interface driver uvcvideo
[ 2.791454] USB Video Class driver (v1.1.0)
[ 2.838160] input: mma7660 as /devices/platform/s3c2440-i2c.0/i2c-0/0-004c/input/input1
[ 2.838433] mma7660 0-004c: MMA7660 device is probed successfully.
[ 2.838596] i2c-core: driver [mma7660] using legacy suspend method
[ 2.838649] i2c-core: driver [mma7660] using legacy resume method
[ 2.842298] MMA7660 sensor driver registered.
[ 2.846583] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[ 2.852744] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
[ 2.861069] device-mapper: uevent: version 1.0.3
[ 2.865167] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:
dm-devel@redhat.com[ 2.873316] cpuidle: using governor ladder
[ 2.877418] cpuidle: using governor menu
[ 2.887631] usbcore: registered new interface driver usbhid
[ 2.887681] usbhid: USB HID core driver
[ 2.891577] ALSA device list:
[ 2.893756] No soundcards found.
[ 2.896905] oprofile: hardware counters not available
[ 2.901809] oprofile: using timer interrupt.
[ 2.906145] GACT probability NOT on
[ 2.909530] Mirror/redirect action on
[ 2.913151] u32 classifier
[ 2.915821] Actions configured
[ 2.919216] Netfilter messages via NETLINK v0.30.
[ 2.923959] nf_conntrack version 0.5.0 (6164 buckets, 24656 max)
[ 2.930769] ctnetlink v0.93: registering with nfnetlink.
[ 2.935234] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.942098] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.948259] xt_time: kernel timezone is -0000
[ 2.953842] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.957689] arp_tables: (C) 2002 David S. Miller
[ 2.962190] TCP cubic registered
[ 2.966272] NET: Registered protocol family 10
[ 2.974611] Mobile IPv6
[ 2.974664] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.977769] IPv6 over IPv4 tunneling driver
[ 2.986375] NET: Registered protocol family 17
[ 2.986443] NET: Registered protocol family 15
[ 2.990618] NET: Registered protocol family 35
[ 2.995073] Registering the dns_resolver key type
[ 2.999795] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[ 3.007262] ThumbEE CPU extension supported.
[ 3.011675] s5pv210_cpufreq_init: S5PV210 cpu-freq driver
[ 3.017427] regulator_init_complete: pd_mfc_supply: disabling
[ 3.022640] regulator_init_complete: pd_tv_supply: disabling
[ 3.028299] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 3.033712] s3c-rtc s3c64xx-rtc: setting system clock to 2015-12-08 05:38:10 UTC (1449553090)
[ 3.043685] FIMC0 registered successfully
[ 3.047509] FIMC1 registered successfully
[ 3.051425] FIMC2 registered successfully
[ 3.054267] S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[ 3.060475] s5p-tvout s5p-tvout: hpd status is cable removed
[ 3.091695] dm9000 dm9000: eth0: link down
[ 3.091860] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.321765] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3.336761] dm9000 dm9000: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[ 3.336898] IP-Config: Complete:
[ 3.336927] device=eth0, addr=192.168.0.10, mask=255.255.255.0, gw=192.168.0.254,
[ 3.336999] host=linux, domain=, nis-domain=arm9.net,
[ 3.337637] bootserver=192.168.0.254, rootserver=192.168.0.254, rootpath=
[ 3.345464] Freeing init memory: 1452K
192.168.0.254 /home/linux/nfs/rootfs_mini210 192.168.0.10 192.168.0.254 192.168.0.254 255.255.255.0 linux.arm9.net eth0 off
[ 4.589357] s3c2410-wdt s3c2410-wdt: Unexpected close, not stopping watchdog
[ 4.654621] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[07/Dec/2015:21:38:14 +0000] boa: server version Boa/0.94.13
[07/Dec/2015:21:38:14 +0000] boa: server built Dec 30 2010 at 11:18:35.
[07/Dec/2015:21:38:14 +0000] boa: starting server pid=1080, port 80
[ 9.008113] FriendlyARM
http://www.arm9.net[ 9.119377] asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
[ 9.508805]
[ 9.508812] rtw driver version=v3.3.2_3192.20120103
[ 9.508870] ##########rtw_suspend_lock_init ###########
[ 9.513325] usbcore: registered new interface driver rtl8192cu
[ 9.537395] Compat-wireless backport release: compat-wireless-2012-05-04
[ 9.537464] Backport based on linux-next.git next-20120510
[ 9.593513] cfg80211: Calling CRDA to update world regulatory domain
[ 9.787789] usbcore: registered new interface driver ath9k_htc
[ 9.844514] usbcore: registered new interface driver rt73usb
[ 9.895202] usbcore: registered new interface driver rt2800usb
[ 9.936137] usbcore: registered new interface driver zd1211rw
[ 9.978683] libertas_sdio: Libertas SDIO driver
[ 9.978734] libertas_sdio: Copyright Pierre Ossman
Try to bring eth0 interface up......NFS root ...Done
