主题 : 请教:micro2440从PC端虚拟机NFS启动,终端没有反应,像是死机一般 复制链接 | 浏览器收藏 | 打印
级别: 新手上路
UID: 12567
精华: 0
发帖: 4
金钱: 20 两
威望: 4 点
综合积分: 8 分
注册时间: 2010-01-09
最后登录: 2010-01-09
楼主  发表于: 2010-01-09 20:25

 请教:micro2440从PC端虚拟机NFS启动,终端没有反应,像是死机一般

我的开发板是micro2440,PC上装的是linux虚拟机
网络是畅通的,可以从开发板挂载root_qtopia目录

但是从NFS启动的时候遇到了问题

后面部分启动代码如下:

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
enable_irq(51) unbalanced from c0170b78
IP-Config: Complete:
      device=eth0, addr=192.168.0.12, mask=255.255.255.0, gw=192.168.0.8,
     host=binly, domain=, nis-domain=linux,
     bootserver=192.168.0.8, rootserver=192.168.0.8, rootpath=
Looking up port of RPC 100003/2 on 192.168.0.8
Looking up port of RPC 100005/1 on 192.168.0.8
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing init memory: 144K

到这里,就死了,没有反应

不知道是什么原因啊,搞了一天了,非常郁闷,请大侠们帮俺分析分析啊,多谢啦!
相信自己能够做到,不要惧怕,没什么大不了的!
级别: 新手上路
UID: 12567
精华: 0
发帖: 4
金钱: 20 两
威望: 4 点
综合积分: 8 分
注册时间: 2010-01-09
最后登录: 2010-01-09
1楼  发表于: 2010-01-09 20:28
感觉应该是什么配置没有弄好,但自己有不知道,新手上路,请大家多多指教,谢啦
相信自己能够做到,不要惧怕,没什么大不了的!
*無鈳取玳
级别: 论坛版主
UID: 27
精华: 12
发帖: 5398
金钱: 40120 两
威望: 17929 点
综合积分: 11036 分
注册时间: 2008-01-16
最后登录: 2014-11-22
2楼  发表于: 2010-01-09 22:18
你用的内核和文件系统分别是哪个版本的,从哪里下载的?
"If you have an apple and I have an apple and we exchange apples, then you and I will
still each have one apple. But if you have an idea and I have an idea and we exchange
these ideas, then each of us will have two ideas."