开发板启动问题

我用内核启动开发板，停在了starting qtopia。。。
而minicom中显示：
s3c2410-sdi s3c2410-sdi: running at 198kHz (requested: 197kHz).                
s3c2410-sdi s3c2410-sdi: running at 198kHz (requested: 197kHz).                
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card                                
s3c2410-sdi s3c2410-sdi: running at 198kHz (requested: 197kHz).                
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card                                
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card                                
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card                                
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card                                
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card                                
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card                                
s3c2410-sdi s3c2410-sdi: powered down.                                          
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)                  
TCP established hash table entries: 4096 (order: 3, 32768 bytes)                
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)                      
TCP: Hash tables configured (established 4096 bind 4096)                        
TCP reno registered                                                            
TCP bic registered                                                              
NET: Registered protocol family 1                                              
NET: Registered protocol family 17                                              
yaffs: dev is 32505858 name is "mtdblock2"                                      
yaffs: Attempting MTD mount on 31.2, "mtdblock2"                                
VFS: Mounted root (yaffs filesystem).                                          
Mounted devfs on /dev                                                          
Freeing init memory: 144K                                                      
mini2440_backlight: module license 'unspecified' taints kernel.                
backlight initialized                                                          
0                                                                              
control=0                                                                      
[30/Apr/2009:17:02:01 +0000] boa: server version Boa/0.94.13                    
[30/Apr/2009:17:02:01 +0000] boa: server built Feb 28 2004 at 21:47:23.        
[30/Apr/2009:17:02:01 +0000] boa: starting server pid=277, port 80              
                                                                                
enable_irq(51) unbalanced from c0173b50                                        
                                                                                
Please press Enter to activate this console.                                    
Gsm Thread Started!  

请问如何解决？

Gsm Thread Started!  

你用UART接了GSM模块？

没错。那不过还没有写驱动程序。那我现在该怎么办？

你改过Qtopia的配置吗？会不会把本来作为console的UART0配置成了连接GSM模块的接口？

当时，开发板，被另外一个合作伙伴拿去接上了，我也不是很清楚，那我要怎么看那个uart0接是否配置成GSM接口？

UART0是接上了GSM模块，那要在哪里改配置呢？

如果你UART0上接了GSM，那上面那些启动信息是从哪里打印出来的？

在Minicom中打印出来。

引用第7楼etgz于2009-04-30 22:16发表的  :
在Minicom中打印出来。

那我是不是应该问你的minicom用的串口接的是你开发板上的哪个UART？

接的是那个RS 232的串口0吖。。。我是新人刚研究，没森验，望见谅。。。