模仿mini2440-linux-2.6.29 自已修改的linux2.6.29, 编译器是arm-linux-gcc-4.3.2
在make zImage 最后提示 no machin record 错误
arch/arm/kerenl/vmlinux.lds.s 里的最后两行后, 编译通过
可是内核启动不了. 有人能解答么??????+---------------------------------------------+
| S3C2440A USB Downloader ver R0.03 2004 Jan |
+---------------------------------------------+
USB: IN_ENDPOINT:1 OUT_ENDPOINT:3
FORMAT: <ADDR(DATA):4>+<SIZE(n+10):4>+<DATA:n>+<CS:2>
NOTE: Power off/on or press the reset button for 1 sec
in order to get a valid USB device address.
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Found saved vivi parameters.
Press Return to start the LINUX/Wince now, any other key for vivi
Copy linux kernel from 0x00050000 to 0x30008000, size = 0x00200000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySA
C0"
MACH_TYPE = 782
NOW, Booting Linux......
Uncompressing Linux.............................................................
......................................................... done, booting the kern
el.
