Enter your selection: w
Clear the free memory ..........................................................
...
Read eboot image from flash ......
ReadImageFromNand: TOC is invalidate: 0x1, use default toc to load eboot
Sector addr on NAND: 0x100
TotalSector: 0x100
LoadAddress: 0x30038000
JumpAddr: 0x30038000
Now, to download the wince image(nk.bin) ......
USB host is connected. Waiting a download.
Now, Downloading [ADDRESS:30058000h,TOTAL:22315133]
Downloaded file at 0x30000000, size = 22315123 bytes
Mark bad blocks as unused ......
Extract wince image throught USB ......
OEMMultiBINNotify: Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x8c200000 Length=0x159ed00
-----------------------------------------------------
OEMVerifyMemory: StartAddr: 0x8c200000, Length:0x159ed00
*** Downloading UNKNOWN image type ***
.....................
dwImageStart : 0x8c200000
dwImageLength: 0x159ed00
LaunchAddr : 0x8c201000
rom_offset=0x0.
Run eboot, JumpAddr = 0x30038000
..
刚开始我按MINI2440说明书定制了个自己的系统 然后格了NAND 下在光盘中IMAGE目录下的supervivi_mini2440 接着下载 EBOOT 第一次能看到友善的界面 但进不了系统
后来我改用 PBWorkspaces 下的EBOOT 就出现上面的信息 麻烦帮我看看是什么问题
感觉是JUMP的问题 但又不太懂怎么改
