引用楼主qq2440于2008-01-04 18:21发表的 请问QQ2440_test这个ADS工程有配置SDRAM的ini文件吗？ :
我们直接使用supervivi下载使用的，没有单步调试过。
客户可以自己搞一下
这个是Samsung为SMDK2440写的，应该可以用在QQ2440上，源文件samsung_site_S3C2440A_20040908\S3C2440A_20040908\firmware_BSP\2440a_fw_testcode_rev06_040607\2440Anorom.ini
Com ==================
Com Filename: 2440Anorom.Ini
Com 2003. 5. Xx 1St Draft.
Com 2004. 3. 4 Edited For S3C2440A
Com ==================
Com For S3C2440A
Com Sdram_Little_32, 64Mb
Com Fclk:101.25Mhz Upll:48Mhz
Com Sdram Refresh: 64Ms(8Kcycle) -> 7.8Us
Swat $Vector_Catch 0X00
Swat $Semihosting_Enabled 0X00
Swat Psr %Ift_Svc
Com Swat Psr %If_Svc32
Com [Disable Watch-Dog Reset]
Swat *0X53000000 0
Com << Clock Setting >>
Com [Pll Lock Time Setting Maximum]
Swat *0X4C000000 ((0Xfff<<12)+(0Xfff<<0))
Com Fclk:Hclk:Pclk=1:3:6.
Swat *0X4C000014 ((0<<2)+(3<<1)+(1))
Com [Fclk Pms Setting:294.9140Mhz -> 0X7F,2,2]
Swat *0X4C000004 ((0X61<<12)+(0X1<<4)+(0X2<<0))
Com [Uclk Pms Setting:48Mhz -> 0X78,2,3]
Swat *0X4C000008 ((0X40<<12)+(0X4<<4)+(0X2<<0))
Com << Memory Setting >>
Com [Bank6/7: 32-Bit Bus Width]
Swat *0X48000000 0X22000000
Com [Bank0-5: Access Cycle: 14-Clocks, Others:0-Clock]
Swat *0X48000004 ((0<<13)+(0<<11)+(7<<8)+(0<<6)+(0<<4)+(0<<2)+0)
Swat *0X48000008 ((0<<13)+(0<<11)+(7<<8)+(0<<6)+(0<<4)+(0<<2)+0)
Swat *0X4800000C ((0<<13)+(0<<11)+(7<<8)+(0<<6)+(0<<4)+(0<<2)+0)
Swat *0X48000010 ((0<<13)+(0<<11)+(7<<8)+(0<<6)+(0<<4)+(0<<2)+0)
Swat *0X48000014 ((0<<13)+(0<<11)+(7<<8)+(0<<6)+(0<<4)+(0<<2)+0)
Swat *0X48000018 ((0<<13)+(0<<11)+(7<<8)+(0<<6)+(0<<4)+(0<<2)+0)
Com [Bank6/7: Sdram, Trcd:2Clock, Ca:9-Bit]
Swat *0X4800001C ((3<<15)+(0<<2)+1)
Swat *0X48000020 ((3<<15)+(0<<2)+1)
Com [Sdram Refresh Enable, Trp=2Clk, Trc=5Clk, Refresh:1654]
Swat *0X48000024 ((1<<23)+(0<<22)+(0<<20)+(1<<18)+1654)
Com [Scke_En Enable, Sclk_En Enable, Bank6/7 Memory Map: 64Mb/64Mb]
Swat *0X48000028 (0X1+(1<<5)+(1<<4))
Com [Bank6/7 Cl: 3-Clocks]
Swat *0X4800002C 0X30
Swat *0X48000030 0X30
