flashing fs-image...
Installing fs-image succeed
OS 'LINUX' Installed
Superboot-4412 V1.4(20131212) by FriendlyARM
Booting from eMMC
Uncompressing Linux... done, booting the kernel.
Superboot-4412 V1.6(20140317) by FriendlyARM
Booting from SD
Superboot-4412
Ver: 1.6(20140317)
CPU: Exynos4412 1.5GHz
RAM: 2GB
eMMC: 16GB
Touch Device: 1-wire
LCD Type: W101(Auto)
Installing OS 'LINUX'
Installing bootloader...
Installing bootloader succeed
Installing bootloader succeed
Installing kernel...
Installing kernel succeed
Installing ramdisk...
Installing ramdisk succeed
Installing fs-image...
Installing fs-image succeed
OS 'LINUX' Installed
Superboot-4412 V1.6(20140317) by FriendlyARM
Booting from eMMC
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-FriendlyARM (root@tzs-friendlyarm) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #2 SMP PREEMPT Tue Apr 22 18:35:00 HKT 2014
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: TINY4412
[ 0.000000] USB PHY0 configured as HOST mode
[ 0.000000] TINY4412: W101 selected
[ 0.000000] NR_BANKS too low, ignoring high memory
[ 0.000000] cma: CMA: reserved 32 MiB at 6d800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU EXYNOS4412 (id 0xe4412011)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] s3c_register_clksrc: clock armclk has no registers set
[ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[ 0.000000] audiocdclk: no parent clock specified
[ 0.000000] EXYNOS4: PLL settings, A=1500000000, M=800000000, E=96000000 V=350000000
[ 0.000000] EXYNOS4: ARMCLK=1500000000, DMC=400000000, ACLK200=160000000
[ 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimd: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_jpeg: source is mout_jpeg0 (0), rate is 50000000
[ 0.000000] sclk_fimg2d: source is mout_g2d0 (0), rate is 200000000
[ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 50000000
[ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 50000000
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c2306000 s11712 r8192 d12864 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 509186
[ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootfstype=ext4 console=ttySAC0,115200 init=/linuxrc uhost0=y ctp=0 skipcali=n lcd=W101
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 384MB 344MB 1279MB = 2007MB total
[ 0.000000] Memory: 1991752k/1991752k available, 96184k reserved, 1309696K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc089e168 (8793 kB)
[ 0.000000] .init : 0xc089f000 - 0xc08d4dc0 ( 216 kB)
[ 0.000000] .data : 0xc08d6000 - 0xc0988cd0 ( 716 kB)
[ 0.000000] .bss : 0xc0988cf4 - 0xc09f99b0 ( 452 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:549
[ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.045000] Calibrating delay loop... 2991.71 BogoMIPS (lpj=7479296)
[ 0.045000] pid_max: default: 32768 minimum: 301
[ 0.045000] Mount-cache hash table entries: 512
[ 0.045000] Initializing cgroup subsys debug
[ 0.045000] Initializing cgroup subsys cpuacct
[ 0.045000] Initializing cgroup subsys freezer
[ 0.045000] CPU: Testing write buffer coherency: ok
[ 0.045000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[ 0.045000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.045000] Setting up static identity map for 0x40617da8 - 0x40617e00
[ 0.045000] L310 cache controller enabled
[ 0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
[ 0.095000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[ 0.135000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[ 0.175000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[ 0.175000] Brought up 4 CPUs
[ 0.175000] SMP: Total of 4 processors activated (11966.87 BogoMIPS).
[ 0.175000] NET: Registered protocol family 16
[ 0.190000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.190000] HW revision: 2
[ 0.190000] samsung-adc-v3: no platform data supplied
[ 0.195000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.195000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.195000] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.195000] EXYNOS4x12 PMU Initialize
[ 0.195000] EXYNOS: Initializing architecture
[ 0.195000] s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
[ 0.195000] s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
[ 0.200000] bio: create slab <bio-0> at 0
[ 0.200000] exynos_ion_heap_create: 34
[ 0.200000] exynos_ion_heap_create: 34
[ 0.200000] exynos_ion_heap_create: 34
[ 0.200000] SCSI subsystem initialized
[ 0.200000] usbcore: registered new interface driver usbfs
[ 0.200000] usbcore: registered new interface driver hub
[ 0.200000] usbcore: registered new device driver usb
[ 0.200000] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.0: bus frequency set to 195 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.1: bus frequency set to 195 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.2: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.2: bus frequency set to 97 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.3: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.3: bus frequency set to 195 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.7: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.7: bus frequency set to 195 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 390 KHz
[ 0.200000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
[ 0.200000] Linux media interface: v0.10
[ 0.200000] Linux video capture interface: v2.00
[ 0.200000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.200000] Bluetooth: Core ver 2.16
[ 0.200000] NET: Registered protocol family 31
[ 0.200000] Bluetooth: HCI device and connection manager initialized
[ 0.200000] Bluetooth: HCI socket layer initialized
[ 0.200000] Bluetooth: L2CAP socket layer initialized
[ 0.200000] Bluetooth: SCO socket layer initialized
[ 0.200000] Switching to clocksource mct-frc
[ 0.205000] NET: Registered protocol family 2
[ 0.205000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.205000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.205000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.205000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.205000] TCP: reno registered
[ 0.205000] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205000] NET: Registered protocol family 1
[ 0.205000] RPC: Registered named UNIX socket transport module.
[ 0.205000] RPC: Registered udp transport module.
[ 0.205000] RPC: Registered tcp transport module.
[ 0.205000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.210000] Trying to unpack rootfs image as initramfs...
[ 0.245000] Freeing initrd memory: 984K
[ 0.245000] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.245000] Attached IOMMU controller to exynos4-fimc.0 device.
[ 0.245000] Attached IOMMU controller to exynos4-fimc.1 device.
[ 0.245000] Attached IOMMU controller to exynos4-fimc.2 device.
[ 0.245000] Attached IOMMU controller to exynos4-fimc.3 device.
[ 0.245000] Attached IOMMU controller to s5p-mfc-l device.
[ 0.245000] Attached IOMMU controller to s5p-mfc-r device.
[ 0.245000] Attached IOMMU controller to s5p-mixer device.
[ 0.245000] Attached IOMMU controller to s5p-fimg2d device.
[ 0.250000] Attached IOMMU controller to s5p-jpeg.0 device.
[ 0.250000] platform exynos-fimc-lite.0: No SYSMMU found
[ 0.250000] Attached IOMMU controller to exynos-fimc-lite.0 device.
[ 0.250000] platform exynos-fimc-lite.1: No SYSMMU found
[ 0.250000] Attached IOMMU controller to exynos-fimc-lite.1 device.
[ 0.250000] s3c-adc samsung-adc-v4: attached adc driver
[ 0.250000] Failed to declare coherent memory for MFC device (0 bytes at 0x43000000)
[ 0.250000] highmem bounce pool size: 64 pages
[ 0.255000] NFS: Registering the id_resolver key type
[ 0.255000] Key type id_resolver registered
[ 0.255000] NTFS driver 2.1.30 [Flags: R/W].
[ 0.255000] fuse init (API version 7.19)
[ 0.255000] msgmni has been set to 1398
[ 0.255000] io scheduler noop registered
[ 0.255000] io scheduler deadline registered
[ 0.255000] io scheduler cfq registered (default)
[ 0.270000] s3c-fb exynos4-fb.0: window 0: fb
[ 0.285000] s3c-fb exynos4-fb.0: window 1: fb
[ 0.300000] s3c-fb exynos4-fb.0: window 2: fb
[ 0.315000] s3c-fb exynos4-fb.0: window 3: fb
[ 0.330000] s3c-fb exynos4-fb.0: window 4: fb
[ 0.330000] Start display and show logo
[ 0.330000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[ 0.330000] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.335000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[ 0.335000] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.335000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.335000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
[ 1.275000] console [ttySAC0] enabled
[ 1.280000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
[ 1.290000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
[ 1.295000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
[ 1.305000] leds initialized
[ 1.305000] buttons initialized
[ 1.310000] pwm initialized
[ 1.315000] backlight initialized
[ 1.315000] tiny4412-adc initialized
[ 1.325000] Mali: init_mali_clock mali_clock c0902024 at 440 MHz
[ 1.325000] Mali: Mali device driver loaded
[ 1.330000] brd: module loaded
[ 1.335000] loop: module loaded
[ 1.335000] tun: Universal TUN/TAP device driver, 1.6
[ 1.340000] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 1.345000] PPP generic driver version 2.4.2
[ 1.350000] PPP BSD Compression module registered
[ 1.355000] PPP Deflate Compression module registered
[ 1.360000] PPP MPPE Compression module registered
[ 1.365000] NET: Registered protocol family 24
[ 1.370000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 1.380000] usbcore: registered new interface driver pegasus
[ 1.385000] usbcore: registered new interface driver asix
[ 1.390000] usbcore: registered new interface driver cdc_ether
[ 1.395000] usbcore: registered new interface driver dm9601
[ 1.400000] usbcore: registered new interface driver dm9620
[ 1.405000] usbcore: registered new interface driver net1080
[ 1.410000] usbcore: registered new interface driver cdc_subset
[ 1.415000] usbcore: registered new interface driver zaurus
[ 1.425000] usbcore: registered new interface driver cdc_ncm
[ 1.430000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.435000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 1.440000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.450000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
[ 1.465000] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 1.465000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.465000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.470000] usb usb1: Product: S5P EHCI Host Controller
[ 1.475000] usb usb1: Manufacturer: Linux 3.5.0-FriendlyARM ehci_hcd
[ 1.485000] usb usb1: SerialNumber: s5p-ehci
[ 1.490000] hub 1-0:1.0: USB hub found
[ 1.490000] hub 1-0:1.0: 3 ports detected
[ 1.495000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.500000] exynos-ohci exynos-ohci: PHY already ON
[ 1.505000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[ 1.515000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
[ 1.520000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
[ 1.580000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.580000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.580000] usb usb2: Product: EXYNOS OHCI Host Controller
[ 1.580000] usb usb2: Manufacturer: Linux 3.5.0-FriendlyARM ohci_hcd
[ 1.585000] usb usb2: SerialNumber: exynos-ohci
[ 1.590000] hub 2-0:1.0: USB hub found
[ 1.595000] hub 2-0:1.0: 3 ports detected
[ 1.595000] Initializing USB Mass Storage driver...
[ 1.600000] usbcore: registered new interface driver usb-storage
[ 1.610000] USB Mass Storage support registered.
[ 1.615000] usbcore: registered new interface driver usbserial
[ 1.620000] usbcore: registered new interface driver usbserial_generic
[ 1.625000] USB Serial support registered for generic
[ 1.630000] usbserial: USB Serial Driver core
[ 1.635000] usbcore: registered new interface driver aircable
[ 1.640000] USB Serial support registered for aircable
[ 1.645000] usbcore: registered new interface driver ark3116
[ 1.650000] USB Serial support registered for ark3116
[ 1.655000] usbcore: registered new interface driver belkin_sa
[ 1.660000] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 1.670000] usbcore: registered new interface driver ch341
[ 1.675000] USB Serial support registered for ch341-uart
[ 1.680000] usbcore: registered new interface driver cp210x
[ 1.685000] USB Serial support registered for cp210x
[ 1.690000] usbcore: registered new interface driver cyberjack
[ 1.695000] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 1.705000] usbcore: registered new interface driver cypress_m8
[ 1.710000] USB Serial support registered for DeLorme Earthmate USB
[ 1.715000] USB Serial support registered for HID->COM RS232 Adapter
[ 1.725000] USB Serial support registered for Nokia CA-42 V2 Adapter
[ 1.730000] usbcore: registered new interface driver digi_acceleport
[ 1.735000] USB Serial support registered for Digi 2 port USB adapter
[ 1.740000] USB Serial support registered for Digi 4 port USB adapter
[ 1.750000] usbcore: registered new interface driver io_edgeport
[ 1.755000] USB Serial support registered for Edgeport 2 port adapter
[ 1.760000] USB Serial support registered for Edgeport 4 port adapter
[ 1.770000] USB Serial support registered for Edgeport 8 port adapter
[ 1.775000] USB Serial support registered for EPiC device
[ 1.780000] usbcore: registered new interface driver io_ti
[ 1.785000] USB Serial support registered for Edgeport TI 1 port adapter
[ 1.790000] USB Serial support registered for Edgeport TI 2 port adapter
[ 1.800000] usbcore: registered new interface driver empeg
[ 1.805000] usb 1-2: new high-speed USB device number 2 using s5p-ehci
[ 1.810000] USB Serial support registered for empeg
[ 1.815000] usbcore: registered new interface driver f81232
[ 1.820000] USB Serial support registered for f81232
[ 1.825000] usbcore: registered new interface driver ftdi_sio
[ 1.830000] USB Serial support registered for FTDI USB Serial Device
[ 1.840000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 1.845000] usbcore: registered new interface driver funsoft
[ 1.850000] USB Serial support registered for funsoft
[ 1.855000] usbcore: registered new interface driver garmin_gps
[ 1.860000] USB Serial support registered for Garmin GPS usb/tty
[ 1.865000] usbcore: registered new interface driver hp4x
[ 1.870000] USB Serial support registered for hp4X
[ 1.875000] usbcore: registered new interface driver ipaq
[ 1.880000] USB Serial support registered for PocketPC PDA
[ 1.885000] usbcore: registered new interface driver ipw
[ 1.890000] USB Serial support registered for IPWireless converter
[ 1.900000] usbcore: registered new interface driver ir_usb
[ 1.905000] USB Serial support registered for IR Dongle
[ 1.910000] ir_usb: v0.5:USB IR Dongle driver
[ 1.915000] usbcore: registered new interface driver iuu_phoenix
[ 1.920000] USB Serial support registered for iuu_phoenix
[ 1.925000] usbcore: registered new interface driver keyspan
[ 1.930000] USB Serial support registered for Keyspan - (without firmware)
[ 1.935000] USB Serial support registered for Keyspan 1 port adapter
[ 1.945000] USB Serial support registered for Keyspan 2 port adapter
[ 1.950000] USB Serial support registered for Keyspan 4 port adapter
[ 1.955000] usb 1-2: New USB device found, idVendor=0424, idProduct=2640
[ 1.955000] usbcore: registered new interface driver keyspan_pda
[ 1.955000] USB Serial support registered for Keyspan PDA
[ 1.955000] USB Serial support registered for Keyspan PDA - (prerenumeration)
[ 1.955000] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[ 1.955000] usbcore: registered new interface driver kl5kusb105
[ 1.955000] USB Serial support registered for KL5KUSB105D / PalmConnect
[ 1.955000] usbcore: registered new interface driver kobil_sct
[ 1.955000] USB Serial support registered for KOBIL USB smart card terminal
[ 1.955000] usbcore: registered new interface driver mct_u232
[ 1.955000] USB Serial support registered for MCT U232
[ 1.955000] usbcore: registered new interface driver metro_usb
[ 1.955000] USB Serial support registered for Metrologic USB to Serial
[ 1.955000] usbcore: registered new interface driver mos7720
[ 1.955000] USB Serial support registered for Moschip 2 port adapter
[ 1.955000] usbcore: registered new interface driver mos7840
[ 1.955000] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 1.955000] usbcore: registered new interface driver moto_modem
[ 1.955000] USB Serial support registered for moto-modem
[ 1.955000] usbcore: registered new interface driver navman
[ 1.955000] USB Serial support registered for navman
[ 1.955000] usbcore: registered new interface driver omninet
[ 1.955000] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 1.955000] usbcore: registered new interface driver opticon
[ 1.955000] USB Serial support registered for opticon
[ 1.955000] usbcore: registered new interface driver option
[ 1.955000] USB Serial support registered for GSM modem (1-port)
[ 1.955000] usbcore: registered new interface driver oti6858
[ 1.955000] USB Serial support registered for oti6858
[ 1.955000] usbcore: registered new interface driver pl2303
[ 1.955000] USB Serial support registered for pl2303
[ 1.955000] usbcore: registered new interface driver qcaux
[ 1.955000] USB Serial support registered for qcaux
[ 1.955000] usbcore: registered new interface driver qcserial
[ 1.955000] USB Serial support registered for Qualcomm USB modem
[ 1.955000] usbcore: registered new interface driver quatech2
[ 1.955000] USB Serial support registered for Quatech 2nd gen USB to Serial Driver
[ 1.955000] safe_serial: v0.1:USB Safe Encapsulated Serial
[ 1.955000] usbcore: registered new interface driver safe_serial
[ 1.955000] USB Serial support registered for safe_serial
[ 1.955000] usbcore: registered new interface driver siemens_mpi
[ 1.955000] USB Serial support registered for siemens_mpi
[ 1.955000] usbcore: registered new interface driver sierra
[ 1.955000] USB Serial support registered for Sierra USB modem
[ 1.955000] usbcore: registered new interface driver spcp8x5
[ 1.955000] USB Serial support registered for SPCP8x5
[ 1.955000] usbcore: registered new interface driver ssu100
[ 1.955000] USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[ 1.955000] usbcore: registered new interface driver symbolserial
[ 1.955000] USB Serial support registered for symbol
[ 1.955000] usbcore: registered new interface driver ti_usb_3410_5052
[ 1.955000] USB Serial support registered for TI USB 3410 1 port adapter
[ 1.955000] USB Serial support registered for TI USB 5052 2 port adapter
[ 1.955000] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[ 1.955000] usbcore: registered new interface driver visor
[ 1.955000] USB Serial support registered for Handspring Visor / Palm OS
[ 1.955000] USB Serial support registered for Sony Clie 5.0
[ 1.955000] USB Serial support registered for Sony Clie 3.5
[ 1.960000] usbcore: registered new interface driver whiteheat
[ 1.960000] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 1.960000] USB Serial support registered for Connect Tech - WhiteHEAT
[ 1.960000] usbcore: registered new interface driver vivopay_serial
[ 1.960000] USB Serial support registered for vivopay-serial
[ 1.960000] usbcore: registered new interface driver zio
[ 1.960000] USB Serial support registered for zio
[ 1.960000] mousedev: PS/2 mouse device common for all mice
[ 1.960000] usbcore: registered new interface driver xpad
[ 1.960000] touchscreen-1wire initialized
[ 1.960000] backlight-1wire initialized
[ 1.960000] setup_irq: ret = 0
[ 1.960000] PWM clock = 100000000
[ 1.960000] TCNT_FOR_SAMPLE_BIT = 650, TCFG1 = 00010004
[ 1.960000] input: fa_ts_input as /devices/virtual/input/input0
[ 1.960000] ts-if initialized
[ 1.960000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 1.960000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 1.960000] s3c-rtc s3c64xx-rtc: warning: invalid RTC value so initializing it
[ 1.960000] i2c /dev entries driver
[ 1.960000] gspca_main: v2.14.0 registered
[ 1.960000] usbcore: registered new interface driver benq
[ 1.960000] usbcore: registered new interface driver conex
[ 1.960000] usbcore: registered new interface driver cpia1
[ 1.960000] usbcore: registered new interface driver etoms
[ 1.960000] usbcore: registered new interface driver finepix
[ 1.960000] usbcore: registered new interface driver jeilinj
[ 1.960000] usbcore: registered new interface driver jl2005bcd
[ 1.960000] usbcore: registered new interface driver kinect
[ 1.960000] usbcore: registered new interface driver konica
[ 1.960000] usbcore: registered new interface driver mars
[ 1.960000] usbcore: registered new interface driver mr97310a
[ 1.960000] usbcore: registered new interface driver nw80x
[ 1.960000] usbcore: registered new interface driver ov519
[ 1.960000] usbcore: registered new interface driver ov534
[ 1.960000] usbcore: registered new interface driver ov534_9
[ 1.960000] usbcore: registered new interface driver pac207
[ 1.960000] usbcore: registered new interface driver gspca_pac7302
[ 1.960000] usbcore: registered new interface driver pac7311
[ 1.960000] usbcore: registered new interface driver se401
[ 1.960000] usbcore: registered new interface driver sn9c2028
[ 1.960000] usbcore: registered new interface driver gspca_sn9c20x
[ 1.960000] usbcore: registered new interface driver sonixb
[ 1.960000] usbcore: registered new interface driver sonixj
[ 1.960000] usbcore: registered new interface driver spca500
[ 1.960000] usbcore: registered new interface driver spca501
[ 1.960000] usbcore: registered new interface driver spca505
[ 1.960000] usbcore: registered new interface driver spca506
[ 1.960000] usbcore: registered new interface driver spca508
[ 1.960000] usbcore: registered new interface driver spca561
[ 1.960000] usbcore: registered new interface driver spca1528
[ 1.960000] usbcore: registered new interface driver sq905
[ 1.960000] usbcore: registered new interface driver sq905c
[ 1.960000] usbcore: registered new interface driver sq930x
[ 1.960000] usbcore: registered new interface driver sunplus
[ 1.960000] usbcore: registered new interface driver stk014
[ 1.960000] usbcore: registered new interface driver stv0680
[ 1.960000] usbcore: registered new interface driver t613
[ 1.960000] usbcore: registered new interface driver gspca_topro
[ 1.960000] usbcore: registered new interface driver tv8532
[ 1.960000] usbcore: registered new interface driver vc032x
[ 1.960000] usbcore: registered new interface driver vicam
[ 1.960000] usbcore: registered new interface driver xirlink-cit
[ 1.960000] usbcore: registered new interface driver gspca_zc3xx
[ 1.960000] usbcore: registered new interface driver ALi m5602
[ 1.960000] usbcore: registered new interface driver STV06xx
[ 1.960000] usbcore: registered new interface driver gspca_gl860
[ 1.985000] FIMC-IS probe completed
[ 1.985000] [INFO]flite_probe:756: fimc-lite0 probe success
[ 1.985000] [INFO]flite_probe:756: fimc-lite1 probe success
[ 1.985000] s5p-fimc-md: Registered fimc.0.m2m as /dev/video0
[ 1.985000] s5p-fimc-md: Registered fimc.0.capture as /dev/video1
[ 1.985000] s5p-fimc-md: Registered fimc.1.m2m as /dev/video2
[ 1.985000] s5p-fimc-md: Registered fimc.1.capture as /dev/video3
[ 1.985000] s5p-fimc-md: Registered fimc.2.m2m as /dev/video4
[ 1.985000] s5p-fimc-md: Registered fimc.2.capture as /dev/video5
[ 1.985000] s5p-fimc-md: Registered fimc.3.m2m as /dev/video6
[ 1.985000] s5p-fimc-md: Registered fimc.3.capture as /dev/video7
[ 1.985000] s5p-mfc s5p-mfc: decoder registered as /dev/video8
[ 1.985000] s5p-mfc s5p-mfc: encoder registered as /dev/video9
[ 1.985000] HDMI unplugged
[ 1.985000] s5p-hdmiphy 8-0038: probe successful
[ 1.990000] s5p-hdmi exynos4-hdmi: probe successful
[ 1.990000] i2c i2c-7: attached s5p_ddc into i2c adapter successfully
[ 1.990000] i2c-core: driver [s5p_ddc] using legacy suspend method
[ 1.990000] i2c-core: driver [s5p_ddc] using legacy resume method
[ 1.990000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
[ 1.990000] s5p-mixer s5p-mixer: probe start
[ 1.990000] s5p-mixer s5p-mixer: resources acquired
[ 1.990000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
[ 1.990000] s5p-mixer s5p-mixer: module s5p-sdo is missing
[ 1.990000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video10
[ 1.990000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video11
[ 1.990000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video12
[ 1.990000] s5p-mixer s5p-mixer: probe successful
[ 1.990000] Initialize JPEG driver
[ 1.990000] s5p-jpeg s5p-jpeg.0: JPEG driver is registered to /dev/video13
[ 1.990000] Exynos Graphics 2D driver, (c) 2011 Samsung Electronics
[ 1.990000] [fimg2d_probe] base address: 0x10800000
[ 1.990000] [fimg2d_probe] irq: 121
[ 1.990000] [fimg2d_clk_setup] parent clk: mout_g2d0
[ 1.990000] [fimg2d_clk_setup] sclk: sclk_fimg2d
[ 1.990000] [fimg2d_clk_setup] clkrate: 200000000 parent clkrate: 800000000
[ 1.990000] [fimg2d_clk_setup] gate clk: fimg2d
[ 1.990000] [fimg2d_probe] enable runtime pm
[ 1.990000] [fimg2d_probe] sysmmu disabled for fimg2d
[ 1.990000] usbcore: registered new interface driver uvcvideo
[ 1.990000] USB Video Class driver (1.1.1)
[ 1.990000] samsung-fake-battery samsung-fake-battery: samsung_fake_bat_probe
[ 2.030000] input: mma7660 as /devices/platform/s3c2440-i2c.3/i2c-3/3-004c/input/input1
[ 2.030000] mma7660 3-004c: MMA7660 device is probed successfully.
[ 2.030000] i2c-core: driver [mma7660] using legacy suspend method
[ 2.030000] i2c-core: driver [mma7660] using legacy resume method
[ 2.030000] MMA7660 sensor driver registered.
[ 2.030000] Exynos: Kernel Thermal management registered
[ 2.030000] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[ 2.035000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
[ 2.035000] device-mapper: uevent: version 1.0.3
[ 2.035000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@redhat.com[ 2.035000] Bluetooth: Virtual HCI driver ver 1.3
[ 2.035000] Bluetooth: HCI UART driver ver 2.2
[ 2.035000] Bluetooth: HCI H4 protocol initialized
[ 2.035000] Bluetooth: HCI BCSP protocol initialized
[ 2.035000] Bluetooth: HCILL protocol initialized
[ 2.035000] usbcore: registered new interface driver bcm203x
[ 2.035000] usbcore: registered new interface driver bpa10x
[ 2.035000] usbcore: registered new interface driver bfusb
[ 2.035000] usbcore: registered new interface driver btusb
[ 2.035000] cpuidle: using governor ladder
[ 3.010000] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.010000] cpuidle: using governor menu
[ 3.010000] sdhci: Secure Digital Host Controller Interface driver
[ 3.010000] sdhci: Copyright(c) Pierre Ossman
[ 3.010000] Front
[ 3.010000] Synopsys Designware Multimedia Card Interface Driver
[ 3.035000] dw_mmc dw_mmc: Using internal DMA controller.
[ 3.035000] hub 1-2:1.0: USB hub found
[ 3.035000] hub 1-2:1.0: 3 ports detected
[ 3.085000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 3.085000] dw_mmc dw_mmc: Version ID is 240a
[ 3.085000] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
[ 3.085000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (100000000 Hz)
[ 3.115000] mmc1: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
[ 3.115000] s3c-sdhci exynos4-sdhci.3: clock source 2: mmc_busclk.2 (100000000 Hz)
[ 3.130000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[ 3.130000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[ 3.130000] mmc0: new high speed DDR MMC card at address 0001
[ 3.135000] mmcblk0: mmc0:0001 MAG2WA 14.5 GiB
[ 3.140000] mmcblk0boot0: mmc0:0001 MAG2WA partition 1 2.00 MiB
[ 3.145000] mmc2: SDHCI controller on samsung-hsmmc [exynos4-sdhci.3] using ADMA
[ 3.145000] usbcore: registered new interface driver usbhid
[ 3.145000] usbhid: USB HID core driver
[ 3.145000] Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
[ 3.145000] audss_init: RCLK SRC[busclk]
[ 3.145000] Samsung SRP driver, (c)2011 Samsung Electronics
[ 3.180000] 2: TCNTB=0000028a, TCNTO=00000264, TINT_CSTAT=00000008
[ 3.185000] mmcblk0boot1: mmc0:0001 MAG2WA partition 2 2.00 MiB
[ 3.190000] mmcblk0: p1
[ 3.195000] GACT probability NOT on
[ 3.195000] mmcblk0boot1: unknown partition table
[ 3.195000] mmcblk0boot0: unknown partition table
[ 3.205000] Mirror/redirect action on
[ 3.210000] u32 classifier
[ 3.210000] Actions configured
[ 3.215000] Netfilter messages via NETLINK v0.30.
[ 3.220000] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.225000] ctnetlink v0.93: registering with nfnetlink.
[ 3.230000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 3.240000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 3.245000] xt_time: kernel timezone is -0000
[ 3.250000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.255000] arp_tables: (C) 2002 David S. Miller
[ 3.260000] TCP: cubic registered
[ 3.260000] Initializing XFRM netlink socket
[ 3.260000] mmc1: new high speed SDHC card at address aaaa
[ 3.265000] mmcblk1: mmc1:aaaa SU08G 7.40 GiB
[ 3.265000] mmcblk1: p1
[ 3.280000] NET: Registered protocol family 10
[ 3.285000] mip6: Mobile IPv6
[ 3.285000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.290000] sit: IPv6 over IPv4 tunneling driver
[ 3.295000] NET: Registered protocol family 17
[ 3.300000] NET: Registered protocol family 15
[ 3.305000] Bluetooth: RFCOMM TTY layer initialized
[ 3.310000] Bluetooth: RFCOMM socket layer initialized
[ 3.315000] Bluetooth: RFCOMM ver 1.11
[ 3.320000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.325000] Bluetooth: BNEP filters: protocol multicast
[ 3.330000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.335000] NET: Registered protocol family 35
[ 3.340000] Key type dns_resolver registered
[ 3.345000] EXYNOS4X12: Adaptive Support Voltage init
[ 3.350000] EXYNOS4X12(SG): ORIG : 5 MOD : 0 RESULT : 5
[ 3.355000] EXYNOS: Fail to get HPM Value
[ 3.360000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 3.365000] ThumbEE CPU extension supported.
[ 3.370000] Registering SWP/SWPB emulation handler
[ 3.375000] usb 1-2.1: new high-speed USB device number 3 using s5p-ehci
[ 3.380000] [ 6 ] Memory Type Undertermined.
[ 3.385000] DVFS : VDD_INT Voltage table set with 0 Group
[ 3.415000] Failed to init busfreq.
[ 3.415000] s3c-rtc s3c64xx-rtc: setting system clock to 2013-01-01 12:00:02 UTC (1357041602)
[ 3.415000] hotplug_policy_init: intialised with policy : DVFS_NR_BASED_HOTPLUG
[ 3.415000] ALSA device list:
[ 3.415000] No soundcards found.
[ 3.415000] Freeing init memory: 212K
[ 3.430000] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
Resizing rootfs /dev/mmcblk0p1...
resize2fs 1.42.9 (28-Dec-2013)
Resizing the filesystem on /dev/mmcblk0p1 to 3784192 (4k) blocks.
[ 3.485000] usb 1-2.1: New USB device found, idVendor=0424, idProduct=4040
[ 3.485000] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.485000] usb 1-2.1: Product: Ultra Fast Media Reader
[ 3.485000] usb 1-2.1: Manufacturer: Generic
[ 3.485000] usb 1-2.1: SerialNumber: 000000264001
[ 3.490000] scsi0 : usb-storage 1-2.1:1.0
[ 3.580000] usb 1-2.2: new full-speed USB device number 4 using s5p-ehci
[ 3.665000] usb 1-2.2: device descriptor read/64, error -32
[ 3.855000] usb 1-2.2: device descriptor read/64, error -32
[ 4.045000] usb 1-2.2: new full-speed USB device number 5 using s5p-ehci
[ 4.130000] usb 1-2.2: device descriptor read/64, error -32
[ 4.320000] usb 1-2.2: device descriptor read/64, error -32
[ 4.495000] scsi 0:0:0:0: Direct-Access Generic Ultra HS-COMBO 2.01 PQ: 0 ANSI: 0
[ 4.495000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.495000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.510000] usb 1-2.2: new full-speed USB device number 6 using s5p-ehci
[ 4.920000] usb 1-2.2: device not accepting address 6, error -32
[ 5.005000] usb 1-2.2: new full-speed USB device number 7 using s5p-ehci
[ 5.415000] usb 1-2.2: device not accepting address 7, error -32
[ 5.415000] hub 1-2:1.0: unable to enumerate USB device on port 2
[ 5.500000] usb 1-2.3: new high-speed USB device number 8 using s5p-ehci
[ 5.605000] usb 1-2.3: New USB device found, idVendor=1a40, idProduct=0101
[ 5.605000] usb 1-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.605000] usb 1-2.3: Product: USB 2.0 Hub
[ 5.605000] hub 1-2.3:1.0: USB hub found
[ 5.605000] hub 1-2.3:1.0: 4 ports detected
The filesystem on /dev/mmcblk0p1 is now 3784192 blocks long.
[ 9.410000] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
1Wire touchscreen OK
[ 9.735000] FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[01/Jan/2013:04:00:10 +0000] boa: server version Boa/0.94.13
[01/Jan/2013:04:00:10 +0000] boa: server built Dec 30 2010 at 11:18:35.
[01/Jan/2013:04:00:10 +0000] boa: starting server pid=171, port 80
[ 14.115000] FriendlyARM
http://www.arm9.net[ 14.225000] asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
[ 14.225000] preallocate_idma_buffer: VA-f0b80000 PA-2058000 131072bytes
[ 14.225000] asoc: wm8960-hifi <-> samsung-i2s.4 mapping ok
[ 14.370000] rtw driver version=v3.4.4_4749.20121105
[ 14.370000] Build at: Aug 14 2013 17:16:01
[ 14.370000] usbcore: registered new interface driver rtl8192cu
[ 14.380000] Compat-drivers backport release: compat-drivers-v3.8.3-2-snpu
[ 14.380000] Backport based on linux-stable.git v3.8.3
[ 14.380000] compat.git: linux-stable.git
[ 14.395000] cfg80211: Calling CRDA to update world regulatory domain
[ 14.415000] usbcore: registered new interface driver ath9k_htc
[ 14.425000] usbcore: registered new interface driver rt73usb
[ 14.435000] usbcore: registered new interface driver rt2800usb
[ 14.445000] usbcore: registered new interface driver zd1211rw
[ 14.455000] libertas_sdio: Libertas SDIO driver
[ 14.455000] libertas_sdio: Copyright Pierre Ossman
Try to bring eth0 interface up......cat: can't open '/sys/class/net/eth0/address': No such file or directory
ifconfig: SIOCSIFADDR: No such device
route: SIOCADDRT: No such process
Done
Please press Enter to activate this console. [ 14.510000] jpeg_m2m_open: cannot specify node type
