客服你好，请教mini210s使用sd卡烧写失败的问题。

客服你好，请问mini210s，使用sd烧写linux，烧写一部分后，没有反应。改为使用正常启动能启动内核，但是文件系统好像没有起来。
反复试了好几次，都无法烧写成功。烧写时低级格式化设置为yes。

贴出你的烧写配置文件内容，以及烧写过程的串口输出信息看看

#This line cannot be removed. by FriendlyARM(www.arm9.net)

CheckOneButton=No
Action = Install
#Action = Run
#OS = Android
OS = Linux

LCD-Mode = No
LCD-Type = H43

#LowFormat = No
LowFormat = Yes
#VerifyNandWrite = No
VerifyNandWrite = Yes
CheckCRC32=No

StatusType = Beeper | LED

################### Android 4.0.3 ####################
Android-BootLoader = Superboot210.bin
Android-Kernel = Android/zImage
Android-CommandLine = root=/dev/mtdblock4 console=ttySAC0,115200 init=/linuxrc androidboot.console=ttySAC0
Android-RootFs-InstallImage = Android/rootfs_android-mlc2.img

################### Android 2.3.1 ####################
#Android-BootLoader = Superboot210.bin
#Android-Kernel = Android2.3.1/zImage
#Android-CommandLine = root=/dev/mtdblock4 console=ttySAC0,115200 init=/linuxrc androidboot.console=s3c2410_serial0
#Android-RootFs-InstallImage = Android2.3.1/rootfs_android-mlc2.img

################### Linux ####################
Linux-BootLoader = Superboot210.bin
Linux-Kernel = Linux/zImage
Linux-CommandLine = root=/dev/mtdblock4 console=ttySAC0,115200 init=/linuxrc
#Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4-mlc2.img
#Linux-RootFs-InstallImage = Linux/rootfs_rtm_210-mlc2.img
#Linux-RootFs-InstallImage = Linux/rootfs-scanner.img
#Linux-RootFs-InstallImage = Linux/qt.img
#Linux-RootFs-InstallImage = Linux/scanner.img
#Linux-RootFs-InstallImage = Linux/room_scanner.img
Linux-RootFs-InstallImage = Linux/scanner20121209.img

################### Windows CE6.0 ####################
WindowsCE6-Bootloader = Superboot210.bin
WindowsCE6-BootLogo = WindowsCE6\bootlogo.bmp
WindowsCE6-InstallImage = WindowsCE

这个配置文件烧写一块mini210s成功，烧写另一块不成功，（为手上有3块mini210s的板子）。

烧写出错时，终端打印信息如下：（喇叭一直响）
Superboot-210                                                                  
Ver: 1.7(20120725)                                                              
CPU: S5PV210 1GHz                                                              
RAM: 512MB                                                                      
NAND: 4GB(MLC2) ID:ECD7947A                                                    
Touch Device: no 1-wire                                                        
LCD Type: H43(Manu)                                                            
                                                                                
Installing OS 'LINUX'                                                          
Installing bootloader...                                                        
file: /images/Superboot210.bin: 528 KB(540672 Byte)                            
Installing bootloader succeed                                                  
Installing kernel...                                                            
file: /images/Linux/zImage: 4 MB(4295700 Byte)                                  
Skip block 0x00000004                                                          
Skip block 0x00000005                                                          
Skip block 0x00000006                                                          
Installing kernel succeed                                                      
Installing yaffs2-image...                                                      
file: /images/Linux/scanner20121209.img: 34 MB(36367680 Byte)                  
Skip block 0x00000010                                                          
Skip block 0x00000011                                                          
Hnst`lling y`ffs2-im`ge faildd  

我也遇到这个问题，请问你是怎么解决到了？