• «
  • 1
  • 2
  • »
  • Pages: 1/2     Go
主题 : Tiny6410  以NandFlash方式启动不了 复制链接 | 浏览器收藏 | 打印
学精嵌入式
级别: 新手上路
UID: 73636
精华: 0
发帖: 18
金钱: 90 两
威望: 18 点
综合积分: 36 分
注册时间: 2012-07-12
最后登录: 2012-08-20
楼主  发表于: 2012-07-16 10:33

 Tiny6410  以NandFlash方式启动不了

我安装Linux到开发板上时,先手动安装的,对nandflash进行过格式化,但最后手动安装没有成功,于是就用自动安装的方法并且安装成功,但是这个时侯以nandflash方式启动时却启动不了屏幕只是亮着却没有任何反应,如何解决啊

这个是自动安装Linux成功时超级终端上的显示:NAND Low-level formating...
NAND Low-level formatted...

Superboot-6410
Ver: 1144
CPU: S3C6410 533MHz
RAM: 256MB
NAND: 2GB(MLC2) ID:ECD58472
Touch Device: 1-wire
LCD Type: Unknown

Installing OS 'LINUX'
Installing bootloader...
file: /images/Linux/u-boot_nand-ram256.bin: 192 KB(196608 Byte)
Installing bootloader succeed
Installing kernel...
file: /images/Linux/zImage_n43: 3 MB(3688828 Byte)
Installing kernel succeed
Installing ubifs-image...
file: /images/linux/rootfs_qtopia_qt4-mlc2.ubi: 163 MB(170917888 Byte)
Installing ubifs-image succeed
OS 'LINUX' Installed


安装成功后我以NandFlash方式启动,超级终端上的显示:spi-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
camera: no parent clock specified
s3c64xx: 10485760 bytes SDRAM reserved for fimc at 0x5f5f8000
s3c64xx: 8388608 bytes SDRAM reserved for pp at 0x5edf8000
s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x5e5f8000
s3c64xx: 6291456 bytes SDRAM reserved for mfc at 0x5dff8000
s3c64xx: 4194304 bytes SDRAM reserved for jpeg at 0x5dbf8000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: root=/dev/mtdblock2 rootfstype=ubifs init=/linuxrc console=
ttySAC0,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 215360k/215360k available, 46784k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff600000 - 0xffe00000   (   8 MB)
    vmalloc : 0xd0800000 - 0xe0000000   ( 248 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0167000   (1404 kB)
      .text : 0xc0167000 - 0xc06d5000   (5560 kB)
      .data : 0xc06f6000 - 0xc0735b20   ( 255 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:246
VIC @f4000000: id 0x00041192, vendor 0x41
VIC @f4010000: id 0x00041192, vendor 0x41
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
s3c64xx_dma_init: Registering DMA channels
s3c64xx_dma_init1: registering DMA 0 (d0808100)
s3c64xx_dma_init1: registering DMA 1 (d0808120)
s3c64xx_dma_init1: registering DMA 2 (d0808140)
s3c64xx_dma_init1: registering DMA 3 (d0808160)
s3c64xx_dma_init1: registering DMA 4 (d0808180)
s3c64xx_dma_init1: registering DMA 5 (d08081a0)
s3c64xx_dma_init1: registering DMA 6 (d08081c0)
s3c64xx_dma_init1: registering DMA 7 (d08081e0)
PL080: IRQ 73, at d0808000
s3c64xx_dma_init1: registering DMA 8 (d080c100)
s3c64xx_dma_init1: registering DMA 9 (d080c120)
s3c64xx_dma_init1: registering DMA 10 (d080c140)
s3c64xx_dma_init1: registering DMA 11 (d080c160)
s3c64xx_dma_init1: registering DMA 12 (d080c180)
s3c64xx_dma_init1: registering DMA 13 (d080c1a0)
s3c64xx_dma_init1: registering DMA 14 (d080c1c0)
s3c64xx_dma_init1: registering DMA 15 (d080c1e0)
PL080: IRQ 74, at d080c000
S3C6410: Initialising architecture
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c: slave address 0x10
s3c-i2c s3c2440-i2c: bus frequency set to 64 KHz
s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.23.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 128 (order: 0, 6144 bytes)
UDP-Lite hash table entries: 128 (order: 0, 6144 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 420
io scheduler noop registered (default)
S3C_LCD clock got enabled :: 133.000 Mhz
LCD TYPE :: N43 will be initialized
Window[0] - FB1: map_video_memory: clear ff600000:0007f800
            FB1: map_video_memory: dma=5d780000 cpu=ff600000 size=0007f800
Window[0] - FB2: map_video_memory: clear ff63fc00:0003fc00
            FB2: map_video_memory: dma=5d7bfc00 cpu=ff63fc00 size=0003fc00
Console: switching to colour frame buffer device 60x34
fb0: s3cfb frame buffer device
Window[1] - FB1: map_video_memory: clear ff700000:0007f800
            FB1: map_video_memory: dma=5cc00000 cpu=ff700000 size=0007f800
Window[1] - FB2: map_video_memory: clear ff73fc00:0003fc00
            FB2: map_video_memory: dma=5cc3fc00 cpu=ff73fc00 size=0003fc00
fb1: s3cfb frame buffer device
Window[2] - FB1: map_video_memory: clear ff680000:0003fc00
            FB1: map_video_memory: dma=5d740000 cpu=ff680000 size=0003fc00
fb2: s3cfb frame buffer device
Window[3] - FB1: map_video_memory: clear ff780000:0003fc00
            FB1: map_video_memory: dma=5cc80000 cpu=ff780000 size=0003fc00
fb3: s3cfb frame buffer device
backlight       initialized
leds    initialized
buttons initialized
pwm     initialized
adc     initialized
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
loop: module loaded
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)

Creating 3 MTD partitions on "NAND 2GiB 3,3V 8-bit":
0x000000000000-0x000000080000 : "Bootloader"
0x000000080000-0x000000580000 : "Kernel"
0x000000580000-0x000080000000 : "File System"
mtd: partition "File System" doesn't start on an erase block boundary -- force r
ead-only
kernel BUG at drivers/mtd/nand/nand_base.c:217!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT
last sysfs file:
Modules linked in:
CPU: 0    Not tainted  (2.6.36-FriendlyARM #7)
PC is at __bug+0x1c/0x28
LR is at __bug+0x18/0x28
pc : [<c016b50c>]    lr : [<c016b508>]    psr: 60000013
sp : cd429e50  ip : 00002f00  fp : 00000000
r10: 00000001  r9 : 00000002  r8 : 0000003f
r7 : ccccc000  r6 : ccccc1a8  r5 : 00000000  r4 : 00000001
r3 : 00000000  r2 : cd429e44  r1 : c064e5b6  r0 : 00000036
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 00c5387d  Table: 50004008  DAC: 00000017
Process swapper (pid: 1, stack limit = 0xcd428268)
Stack: (0xcd429e50 to 0xcd42a000)
9e40:                                     c031c26c c031c2a4 c031c26c c031eb24
9e60: 00000000 00000001 00000000 ccccc000 cd41cc50 000001b0 7fa00000 c031c888
9e80: 00000001 00000000 7ff80000 00100000 cccc0400 c031c8d4 00000001 00000000
9ea0: 7ff80000 c0318158 80000000 00000000 c0682bbc c01d5070 c06f87a4 00000003
9ec0: ccccc1a8 ccccc1a8 00000000 c0713318 c0765b88 cd448200 00000000 c0712f10
9ee0: c03211a4 c0321c9c 00000000 00000002 cd429e80 c06fdff8 c06fdff8 c07134a4
9f00: c07134a4 00000000 00000000 00000000 00000000 c02ffa08 c02ff9f4 c02febf4
9f20: 00000000 c06fdff8 c06fe02c c07134a4 00000000 c02fed04 c07134a4 cd429f48
9f40: c02feca4 c02fdec8 cd401dc8 cd44a040 c07134a4 c07134a4 cd7390c0 c0711870
9f60: 00000000 c02fe57c c06502d5 c06502d5 cd429f68 c07134a4 c002550c c0168e54
9f80: c001a7ec 00000000 00000000 c02fef50 00000000 c07133f8 c002550c c0168e54
9fa0: c001a7ec 00000000 00000000 c001a814 c002521c c01674a4 00000000 c0160000
9fc0: 00000013 000000f5 c0708434 c002521c c002550c c0168e54 00000013 00000000
9fe0: 00000000 c0008af8 00000000 00000000 c0008a60 c0168e54 ffffffff ffffffff
[<c016b50c>] (__bug+0x1c/0x28) from [<c031c2a4>] (nand_select_chip+0x38/0x3c)
[<c031c2a4>] (nand_select_chip+0x38/0x3c) from [<c031eb24>] (nand_block_bad+0x88
/0x138)
[<c031eb24>] (nand_block_bad+0x88/0x138) from [<c031c888>] (nand_block_checkbad+
0x28/0x40)
[<c031c888>] (nand_block_checkbad+0x28/0x40) from [<c031c8d4>] (nand_block_isbad
+0x34/0x40)
[<c031c8d4>] (nand_block_isbad+0x34/0x40) from [<c0318158>] (add_mtd_partitions+
0x5ac/0x6b4)
[<c0318158>] (add_mtd_partitions+0x5ac/0x6b4) from [<c0321c9c>] (s3c_nand_probe+
0x348/0x3dc)
[<c0321c9c>] (s3c_nand_probe+0x348/0x3dc) from [<c02ffa08>] (platform_drv_probe+
0x14/0x18)
[<c02ffa08>] (platform_drv_probe+0x14/0x18) from [<c02febf4>] (driver_probe_devi
ce+0xa8/0x158)
[<c02febf4>] (driver_probe_device+0xa8/0x158) from [<c02fed04>] (__driver_attach
+0x60/0x84)
[<c02fed04>] (__driver_attach+0x60/0x84) from [<c02fdec8>] (bus_for_each_dev+0x4
c/0x78)
[<c02fdec8>] (bus_for_each_dev+0x4c/0x78) from [<c02fe57c>] (bus_add_driver+0x94
/0x210)
[<c02fe57c>] (bus_add_driver+0x94/0x210) from [<c02fef50>] (driver_register+0xa8
/0x12c)
[<c02fef50>] (driver_register+0xa8/0x12c) from [<c001a814>] (s3c_nand_init+0x28/
0x3c)
[<c001a814>] (s3c_nand_init+0x28/0x3c) from [<c01674a4>] (do_one_initcall+0xbc/0
x190)
[<c01674a4>] (do_one_initcall+0xbc/0x190) from [<c0008af8>] (kernel_init+0x98/0x
14c)
[<c0008af8>] (kernel_init+0x98/0x14c) from [<c0168e54>] (kernel_thread_exit+0x0/
0x8)
Code: e59f0010 e1a01003 eb0e4439 e3a03000 (e5833000)
---[ end trace d925a4a783e552ae ]---
Kernel panic - not syncing: Attempted to kill init!
[<c016d464>] (unwind_backtrace+0x0/0xe4) from [<c04fc4d4>] (panic+0x58/0x174)
[<c04fc4d4>] (panic+0x58/0x174) from [<c0187848>] (do_exit+0x68/0x5cc)
[<c0187848>] (do_exit+0x68/0x5cc) from [<c016ba40>] (die+0x190/0x1c0)
[<c016ba40>] (die+0x190/0x1c0) from [<c016e368>] (__do_kernel_fault+0x64/0x84)
[<c016e368>] (__do_kernel_fault+0x64/0x84) from [<c016e560>] (do_page_fault+0x1d
8/0x1f4)
[<c016e560>] (do_page_fault+0x1d8/0x1f4) from [<c0167218>] (do_DataAbort+0x30/0x
98)
[<c0167218>] (do_DataAbort+0x30/0x98) from [<c01679ec>] (__dabt_svc+0x4c/0x60)
Exception stack(0xcd429e08 to 0xcd429e50)
9e00:                   00000036 c064e5b6 cd429e44 00000000 00000001 00000000
9e20: ccccc1a8 ccccc000 0000003f 00000002 00000001 00000000 00002f00 cd429e50
9e40: c016b508 c016b50c 60000013 ffffffff
[<c01679ec>] (__dabt_svc+0x4c/0x60) from [<c016b50c>] (__bug+0x1c/0x28)
[<c016b50c>] (__bug+0x1c/0x28) from [<c031c2a4>] (nand_select_chip+0x38/0x3c)
[<c031c2a4>] (nand_select_chip+0x38/0x3c) from [<c031eb24>] (nand_block_bad+0x88
/0x138)
[<c031eb24>] (nand_block_bad+0x88/0x138) from [<c031c888>] (nand_block_checkbad+
0x28/0x40)
[<c031c888>] (nand_block_checkbad+0x28/0x40) from [<c031c8d4>] (nand_block_isbad
+0x34/0x40)
[<c031c8d4>] (nand_block_isbad+0x34/0x40) from [<c0318158>] (add_mtd_partitions+
0x5ac/0x6b4)
[<c0318158>] (add_mtd_partitions+0x5ac/0x6b4) from [<c0321c9c>] (s3c_nand_probe+
0x348/0x3dc)
[<c0321c9c>] (s3c_nand_probe+0x348/0x3dc) from [<c02ffa08>] (platform_drv_probe+
0x14/0x18)
[<c02ffa08>] (platform_drv_probe+0x14/0x18) from [<c02febf4>] (driver_probe_devi
ce+0xa8/0x158)
[<c02febf4>] (driver_probe_device+0xa8/0x158) from [<c02fed04>] (__driver_attach
+0x60/0x84)
[<c02fed04>] (__driver_attach+0x60/0x84) from [<c02fdec8>] (bus_for_each_dev+0x4
c/0x78)
[<c02fdec8>] (bus_for_each_dev+0x4c/0x78) from [<c02fe57c>] (bus_add_driver+0x94
/0x210)
[<c02fe57c>] (bus_add_driver+0x94/0x210) from [<c02fef50>] (driver_register+0xa8
/0x12c)
[<c02fef50>] (driver_register+0xa8/0x12c) from [<c001a814>] (s3c_nand_init+0x28/
0x3c)
[<c001a814>] (s3c_nand_init+0x28/0x3c) from [<c01674a4>] (do_one_initcall+0xbc/0
x190)
[<c01674a4>] (do_one_initcall+0xbc/0x190) from [<c0008af8>] (kernel_init+0x98/0x
14c)
[<c0008af8>] (kernel_init+0x98/0x14c) from [<c0168e54>] (kernel_thread_exit+0x0/
0x8)
OK

U-Boot 1.1.6 (Oct 18 2011 - 15:23:51) for FriendlyARM MINI6410


CPU:     S3C6410@532MHz
         Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode
)
Board:   MINI6410
DRAM:    256 MB
Flash:   0 kB
NAND:    2048 MB
In:      serial
Out:     serial
Err:     serial
MAC: 08:90:90:90:90:90
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x400000, size 0x500000
..... 5242880 bytes read: OK
Boot with zImage

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.36-FriendlyARM (root@jensen) (gcc version 4.5.1 (ctng-1.8.1-FA
) ) #7 PREEMPT Tue Jan 4 14:05:27 HKT 2011
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: MINI6410
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
camera: no parent clock specified
S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000
S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
mout_apll: source is fout_apll (1), rate is 532000000
mout_epll: source is epll (1), rate is 24000000
mout_mpll: source is mpll (1), rate is 532000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
usb-bus-host: source is clk_48m (0), rate is 48000000
uclk1: source is dout_mpll (1), rate is 66500000
spi-bus: source is mout_epll (0), rate is 24000000
spi-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
camera: no parent clock specified
s3c64xx: 10485760 bytes SDRAM reserved for fimc at 0x5f5f8000
s3c64xx: 8388608 bytes SDRAM reserved for pp at 0x5edf8000
s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x5e5f8000
s3c64xx: 6291456 bytes SDRAM reserved for mfc at 0x5dff8000
s3c64xx: 4194304 bytes SDRAM reserved for jpeg at 0x5dbf8000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: root=/dev/mtdblock2 rootfstype=ubifs init=/linuxrc console=
ttySAC0,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 215360k/215360k available, 46784k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff600000 - 0xffe00000   (   8 MB)
    vmalloc : 0xd0800000 - 0xe0000000   ( 248 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0167000   (1404 kB)
      .text : 0xc0167000 - 0xc06d5000   (5560 kB)
      .data : 0xc06f6000 - 0xc0735b20   ( 255 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:246
VIC @f4000000: id 0x00041192, vendor 0x41
VIC @f4010000: id 0x00041192, vendor 0x41
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
s3c64xx_dma_init: Registering DMA channels
s3c64xx_dma_init1: registering DMA 0 (d0808100)
s3c64xx_dma_init1: registering DMA 1 (d0808120)
s3c64xx_dma_init1: registering DMA 2 (d0808140)
s3c64xx_dma_init1: registering DMA 3 (d0808160)
s3c64xx_dma_init1: registering DMA 4 (d0808180)
s3c64xx_dma_init1: registering DMA 5 (d08081a0)
s3c64xx_dma_init1: registering DMA 6 (d08081c0)
s3c64xx_dma_init1: registering DMA 7 (d08081e0)
PL080: IRQ 73, at d0808000
s3c64xx_dma_init1: registering DMA 8 (d080c100)
s3c64xx_dma_init1: registering DMA 9 (d080c120)
s3c64xx_dma_init1: registering DMA 10 (d080c140)
s3c64xx_dma_init1: registering DMA 11 (d080c160)
s3c64xx_dma_init1: registering DMA 12 (d080c180)
s3c64xx_dma_init1: registering DMA 13 (d080c1a0)
s3c64xx_dma_init1: registering DMA 14 (d080c1c0)
s3c64xx_dma_init1: registering DMA 15 (d080c1e0)
PL080: IRQ 74, at d080c000
S3C6410: Initialising architecture
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c: slave address 0x10
s3c-i2c s3c2440-i2c: bus frequency set to 64 KHz
s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.23.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 128 (order: 0, 6144 bytes)
UDP-Lite hash table entries: 128 (order: 0, 6144 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 420
io scheduler noop registered (default)
S3C_LCD clock got enabled :: 133.000 Mhz
LCD TYPE :: N43 will be initialized
Window[0] - FB1: map_video_memory: clear ff600000:0007f800
            FB1: map_video_memory: dma=5d780000 cpu=ff600000 size=0007f800
Window[0] - FB2: map_video_memory: clear ff63fc00:0003fc00
            FB2: map_video_memory: dma=5d7bfc00 cpu=ff63fc00 size=0003fc00
Console: switching to colour frame buffer device 60x34
fb0: s3cfb frame buffer device
Window[1] - FB1: map_video_memory: clear ff700000:0007f800
            FB1: map_video_memory: dma=5cc00000 cpu=ff700000 size=0007f800
Window[1] - FB2: map_video_memory: clear ff73fc00:0003fc00
            FB2: map_video_memory: dma=5cc3fc00 cpu=ff73fc00 size=0003fc00
fb1: s3cfb frame buffer device
Window[2] - FB1: map_video_memory: clear ff680000:0003fc00
            FB1: map_video_memory: dma=5d740000 cpu=ff680000 size=0003fc00
fb2: s3cfb frame buffer device
Window[3] - FB1: map_video_memory: clear ff780000:0003fc00
            FB1: map_video_memory: dma=5cc80000 cpu=ff780000 size=0003fc00
fb3: s3cfb frame buffer device
backlight       initialized
leds    initialized
buttons initialized
pwm     initialized
adc     initialized
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
loop: module loaded
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)

Creating 3 MTD partitions on "NAND 2GiB 3,3V 8-bit":
0x000000000000-0x000000080000 : "Bootloader"
0x000000080000-0x000000580000 : "Kernel"
0x000000580000-0x000080000000 : "File System"
mtd: partition "File System" doesn't start on an erase block boundary -- force r
ead-only
kernel BUG at drivers/mtd/nand/nand_base.c:217!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT
last sysfs file:
Modules linked in:
CPU: 0    Not tainted  (2.6.36-FriendlyARM #7)
PC is at __bug+0x1c/0x28
LR is at __bug+0x18/0x28
pc : [<c016b50c>]    lr : [<c016b508>]    psr: 60000013
sp : cd429e50  ip : 00002f00  fp : 00000000
r10: 00000001  r9 : 00000002  r8 : 0000003f
r7 : ccccc000  r6 : ccccc1a8  r5 : 00000000  r4 : 00000001
r3 : 00000000  r2 : cd429e44  r1 : c064e5b6  r0 : 00000036
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 00c5387d  Table: 50004008  DAC: 00000017
Process swapper (pid: 1, stack limit = 0xcd428268)
Stack: (0xcd429e50 to 0xcd42a000)
9e40:                                     c031c26c c031c2a4 c031c26c c031eb24
9e60: 00000000 00000001 00000000 ccccc000 cd41cc50 000001b0 7fa00000 c031c888
9e80: 00000001 00000000 7ff80000 00100000 cd725c00 c031c8d4 00000001 00000000
9ea0: 7ff80000 c0318158 80000000 00000000 c0682bbc c01d5070 c06f87a4 00000003
9ec0: ccccc1a8 ccccc1a8 00000000 c0713318 c0765b88 cd448200 00000000 c0712f10
9ee0: c03211a4 c0321c9c 00000000 00000002 cd429e80 c06fdff8 c06fdff8 c07134a4
9f00: c07134a4 00000000 00000000 00000000 00000000 c02ffa08 c02ff9f4 c02febf4
9f20: 00000000 c06fdff8 c06fe02c c07134a4 00000000 c02fed04 c07134a4 cd429f48
9f40: c02feca4 c02fdec8 cd401dc8 cd44a040 c07134a4 c07134a4 cd7390c0 c0711870
9f60: 00000000 c02fe57c c06502d5 c06502d5 cd429f68 c07134a4 c002550c c0168e54
9f80: c001a7ec 00000000 00000000 c02fef50 00000000 c07133f8 c002550c c0168e54
9fa0: c001a7ec 00000000 00000000 c001a814 c002521c c01674a4 00000000 c0160000
9fc0: 00000013 000000f5 c0708434 c002521c c002550c c0168e54 00000013 00000000
9fe0: 00000000 c0008af8 00000000 00000000 c0008a60 c0168e54 ffffffff ffffffff
[<c016b50c>] (__bug+0x1c/0x28) from [<c031c2a4>] (nand_select_chip+0x38/0x3c)
[<c031c2a4>] (nand_select_chip+0x38/0x3c) from [<c031eb24>] (nand_block_bad+0x88
/0x138)
[<c031eb24>] (nand_block_bad+0x88/0x138) from [<c031c888>] (nand_block_checkbad+
0x28/0x40)
[<c031c888>] (nand_block_checkbad+0x28/0x40) from [<c031c8d4>] (nand_block_isbad
+0x34/0x40)
[<c031c8d4>] (nand_block_isbad+0x34/0x40) from [<c0318158>] (add_mtd_partitions+
0x5ac/0x6b4)
[<c0318158>] (add_mtd_partitions+0x5ac/0x6b4) from [<c0321c9c>] (s3c_nand_probe+
0x348/0x3dc)
[<c0321c9c>] (s3c_nand_probe+0x348/0x3dc) from [<c02ffa08>] (platform_drv_probe+
0x14/0x18)
[<c02ffa08>] (platform_drv_probe+0x14/0x18) from [<c02febf4>] (driver_probe_devi
ce+0xa8/0x158)
[<c02febf4>] (driver_probe_device+0xa8/0x158) from [<c02fed04>] (__driver_attach
+0x60/0x84)
[<c02fed04>] (__driver_attach+0x60/0x84) from [<c02fdec8>] (bus_for_each_dev+0x4
c/0x78)
[<c02fdec8>] (bus_for_each_dev+0x4c/0x78) from [<c02fe57c>] (bus_add_driver+0x94
/0x210)
[<c02fe57c>] (bus_add_driver+0x94/0x210) from [<c02fef50>] (driver_register+0xa8
/0x12c)
[<c02fef50>] (driver_register+0xa8/0x12c) from [<c001a814>] (s3c_nand_init+0x28/
0x3c)
[<c001a814>] (s3c_nand_init+0x28/0x3c) from [<c01674a4>] (do_one_initcall+0xbc/0
x190)
[<c01674a4>] (do_one_initcall+0xbc/0x190) from [<c0008af8>] (kernel_init+0x98/0x
14c)
[<c0008af8>] (kernel_init+0x98/0x14c) from [<c0168e54>] (kernel_thread_exit+0x0/
0x8)
Code: e59f0010 e1a01003 eb0e4439 e3a03000 (e5833000)
---[ end trace d44e214d7673c35e ]---
Kernel panic - not syncing: Attempted to kill init!
[<c016d464>] (unwind_backtrace+0x0/0xe4) from [<c04fc4d4>] (panic+0x58/0x174)
[<c04fc4d4>] (panic+0x58/0x174) from [<c0187848>] (do_exit+0x68/0x5cc)
[<c0187848>] (do_exit+0x68/0x5cc) from [<c016ba40>] (die+0x190/0x1c0)
[<c016ba40>] (die+0x190/0x1c0) from [<c016e368>] (__do_kernel_fault+0x64/0x84)
[<c016e368>] (__do_kernel_fault+0x64/0x84) from [<c016e560>] (do_page_fault+0x1d
8/0x1f4)
[<c016e560>] (do_page_fault+0x1d8/0x1f4) from [<c0167218>] (do_DataAbort+0x30/0x
98)
[<c0167218>] (do_DataAbort+0x30/0x98) from [<c01679ec>] (__dabt_svc+0x4c/0x60)
Exception stack(0xcd429e08 to 0xcd429e50)
9e00:                   00000036 c064e5b6 cd429e44 00000000 00000001 00000000
9e20: ccccc1a8 ccccc000 0000003f 00000002 00000001 00000000 00002f00 cd429e50
9e40: c016b508 c016b50c 60000013 ffffffff
[<c01679ec>] (__dabt_svc+0x4c/0x60) from [<c016b50c>] (__bug+0x1c/0x28)
[<c016b50c>] (__bug+0x1c/0x28) from [<c031c2a4>] (nand_select_chip+0x38/0x3c)
[<c031c2a4>] (nand_select_chip+0x38/0x3c) from [<c031eb24>] (nand_block_bad+0x88
/0x138)
[<c031eb24>] (nand_block_bad+0x88/0x138) from [<c031c888>] (nand_block_checkbad+
0x28/0x40)
[<c031c888>] (nand_block_checkbad+0x28/0x40) from [<c031c8d4>] (nand_block_isbad
+0x34/0x40)
[<c031c8d4>] (nand_block_isbad+0x34/0x40) from [<c0318158>] (add_mtd_partitions+
0x5ac/0x6b4)
[<c0318158>] (add_mtd_partitions+0x5ac/0x6b4) from [<c0321c9c>] (s3c_nand_probe+
0x348/0x3dc)
[<c0321c9c>] (s3c_nand_probe+0x348/0x3dc) from [<c02ffa08>] (platform_drv_probe+
0x14/0x18)
[<c02ffa08>] (platform_drv_probe+0x14/0x18) from [<c02febf4>] (driver_probe_devi
ce+0xa8/0x158)
[<c02febf4>] (driver_probe_device+0xa8/0x158) from [<c02fed04>] (__driver_attach
+0x60/0x84)
[<c02fed04>] (__driver_attach+0x60/0x84) from [<c02fdec8>] (bus_for_each_dev+0x4
c/0x78)
[<c02fdec8>] (bus_for_each_dev+0x4c/0x78) from [<c02fe57c>] (bus_add_driver+0x94
/0x210)
[<c02fe57c>] (bus_add_driver+0x94/0x210) from [<c02fef50>] (driver_register+0xa8
/0x12c)
[<c02fef50>] (driver_register+0xa8/0x12c) from [<c001a814>] (s3c_nand_init+0x28/
0x3c)
[<c001a814>] (s3c_nand_init+0x28/0x3c) from [<c01674a4>] (do_one_initcall+0xbc/0
x190)
[<c01674a4>] (do_one_initcall+0xbc/0x190) from [<c0008af8>] (kernel_init+0x98/0x
14c)
[<c0008af8>] (kernel_init+0x98/0x14c) from [<c0168e54>] (kernel_thread_exit+0x0/
0x8)
[ 此帖被周立在2012-07-16 12:50重新编辑 ]
自由,自强,共享,共创。
级别: 论坛版主
UID: 12573
精华: 27
发帖: 8838
金钱: 46490 两
威望: 9298 点
综合积分: 18216 分
注册时间: 2010-01-09
最后登录: 2019-07-16
1楼  发表于: 2012-07-16 10:37

 Re:Tiny6410 以NandFlash方式启动不了

信息不全,见我的签名链接
新手如何向我们反馈有效的信息,以便解决问题,见此贴:
http://www.arm9home.net/read.php?tid-14431.html

[注]: 此处签名链接仅为指引方向,而非解答问题本身.
学精嵌入式
级别: 新手上路
UID: 73636
精华: 0
发帖: 18
金钱: 90 两
威望: 18 点
综合积分: 36 分
注册时间: 2012-07-12
最后登录: 2012-08-20
2楼  发表于: 2012-07-16 12:51

 回 1楼(mindee) 的帖子

师兄, 我刚刚新添加了信息,不知够不够全,麻烦你看看
学精嵌入式
级别: 新手上路
UID: 73636
精华: 0
发帖: 18
金钱: 90 两
威望: 18 点
综合积分: 36 分
注册时间: 2012-07-12
最后登录: 2012-08-20
3楼  发表于: 2012-07-16 12:54

 回 1楼(mindee) 的帖子

我没有找到签名连接
自由,自强,共享,共创。
级别: 论坛版主
UID: 12573
精华: 27
发帖: 8838
金钱: 46490 两
威望: 9298 点
综合积分: 18216 分
注册时间: 2010-01-09
最后登录: 2019-07-16
4楼  发表于: 2012-07-16 13:10

 Re:Tiny6410 以NandFlash方式启动不了

新手如何向我们反馈有效的信息,以便解决问题,见此贴:
http://www.arm9home.net/read.php?tid-14431.html

[注]: 此处签名链接仅为指引方向,而非解答问题本身.
自由,自强,共享,共创。
级别: 论坛版主
UID: 12573
精华: 27
发帖: 8838
金钱: 46490 两
威望: 9298 点
综合积分: 18216 分
注册时间: 2010-01-09
最后登录: 2019-07-16
5楼  发表于: 2012-07-16 13:12

 Re:Tiny6410 以NandFlash方式启动不了

你的uboot可能老了,可用Superboot代替试试
新手如何向我们反馈有效的信息,以便解决问题,见此贴:
http://www.arm9home.net/read.php?tid-14431.html

[注]: 此处签名链接仅为指引方向,而非解答问题本身.
学精嵌入式
级别: 新手上路
UID: 73636
精华: 0
发帖: 18
金钱: 90 两
威望: 18 点
综合积分: 36 分
注册时间: 2012-07-12
最后登录: 2012-08-20
6楼  发表于: 2012-07-16 14:47

 回 5楼(mindee) 的帖子

师兄,还是不行。
下面这个是配置文件中的信息
#This line cannot be removed. by FriendlyARM(www.arm9.net)


CheckOneButton=No
Action=install
OS= Linux

LowFormat=yes
VerifyNandWrite=No

StatusType = Beeper| LED

#################### Linux #####################
Linux-BootLoader = Linux/superboot-20111114.bin
Linux-Kernel = Linux/zImage_n43
Linux-CommandLine = root=/dev/mtdblock2 rootfstype=ubifs init=/linuxrc console=ttySAC0,115200
Linux-RootFs-InstallImage = linux/rootfs_qtopia_qt4-mlc2.ubi
Linux-RootFs-RunImage = linux/rootfs_qtopia_qt4.ext3

################### WindowsCE6 #################


Linux自动安装成功后,再以nandflash方式启动只有开始前几行信息与第一次的不一样后面信息全一样,终端显示如下:


Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.36-FriendlyARM (root@jensen) (gcc version 4.5.1 (ctng-1.8.1-FA
) ) #7 PREEMPT Tue Jan 4 14:05:27 HKT 2011
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: MINI6410
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
camera: no parent clock specified
S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000
S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
mout_apll: source is fout_apll (1), rate is 532000000
mout_epll: source is epll (1), rate is 24000000
mout_mpll: source is mpll (1), rate is 532000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
usb-bus-host: source is clk_48m (0), rate is 48000000
uclk1: source is dout_mpll (1), rate is 66500000
spi-bus: source is mout_epll (0), rate is 24000000
spi-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
camera: no parent clock specified
s3c64xx: 10485760 bytes SDRAM reserved for fimc at 0x5f5f8000
s3c64xx: 8388608 bytes SDRAM reserved for pp at 0x5edf8000
s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x5e5f8000
s3c64xx: 6291456 bytes SDRAM reserved for mfc at 0x5dff8000
s3c64xx: 4194304 bytes SDRAM reserved for jpeg at 0x5dbf8000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: root=/dev/mtdblock2 rootfstype=ubifs init=/linuxrc console=
ttySAC0,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 215360k/215360k available, 46784k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff600000 - 0xffe00000   (   8 MB)
    vmalloc : 0xd0800000 - 0xe0000000   ( 248 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0167000   (1404 kB)
      .text : 0xc0167000 - 0xc06d5000   (5560 kB)
      .data : 0xc06f6000 - 0xc0735b20   ( 255 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:246
VIC @f4000000: id 0x00041192, vendor 0x41
VIC @f4010000: id 0x00041192, vendor 0x41
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
s3c64xx_dma_init: Registering DMA channels
s3c64xx_dma_init1: registering DMA 0 (d0808100)
s3c64xx_dma_init1: registering DMA 1 (d0808120)
s3c64xx_dma_init1: registering DMA 2 (d0808140)
s3c64xx_dma_init1: registering DMA 3 (d0808160)
s3c64xx_dma_init1: registering DMA 4 (d0808180)
s3c64xx_dma_init1: registering DMA 5 (d08081a0)
s3c64xx_dma_init1: registering DMA 6 (d08081c0)
s3c64xx_dma_init1: registering DMA 7 (d08081e0)
PL080: IRQ 73, at d0808000
s3c64xx_dma_init1: registering DMA 8 (d080c100)
s3c64xx_dma_init1: registering DMA 9 (d080c120)
s3c64xx_dma_init1: registering DMA 10 (d080c140)
s3c64xx_dma_init1: registering DMA 11 (d080c160)
s3c64xx_dma_init1: registering DMA 12 (d080c180)
s3c64xx_dma_init1: registering DMA 13 (d080c1a0)
s3c64xx_dma_init1: registering DMA 14 (d080c1c0)
s3c64xx_dma_init1: registering DMA 15 (d080c1e0)
PL080: IRQ 74, at d080c000
S3C6410: Initialising architecture
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c: slave address 0x10
s3c-i2c s3c2440-i2c: bus frequency set to 64 KHz
s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.23.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 128 (order: 0, 6144 bytes)
UDP-Lite hash table entries: 128 (order: 0, 6144 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 420
io scheduler noop registered (default)
S3C_LCD clock got enabled :: 133.000 Mhz
LCD TYPE :: N43 will be initialized
Window[0] - FB1: map_video_memory: clear ff600000:0007f800
            FB1: map_video_memory: dma=5d780000 cpu=ff600000 size=0007f800
Window[0] - FB2: map_video_memory: clear ff63fc00:0003fc00
            FB2: map_video_memory: dma=5d7bfc00 cpu=ff63fc00 size=0003fc00
Console: switching to colour frame buffer device 60x34
fb0: s3cfb frame buffer device
Window[1] - FB1: map_video_memory: clear ff700000:0007f800
            FB1: map_video_memory: dma=5cc00000 cpu=ff700000 size=0007f800
Window[1] - FB2: map_video_memory: clear ff73fc00:0003fc00
            FB2: map_video_memory: dma=5cc3fc00 cpu=ff73fc00 size=0003fc00
fb1: s3cfb frame buffer device
Window[2] - FB1: map_video_memory: clear ff680000:0003fc00
            FB1: map_video_memory: dma=5d740000 cpu=ff680000 size=0003fc00
fb2: s3cfb frame buffer device
Window[3] - FB1: map_video_memory: clear ff780000:0003fc00
            FB1: map_video_memory: dma=5cc80000 cpu=ff780000 size=0003fc00
fb3: s3cfb frame buffer device
backlight       initialized
leds    initialized
buttons initialized
pwm     initialized
adc     initialized
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
loop: module loaded
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)

Creating 3 MTD partitions on "NAND 2GiB 3,3V 8-bit":
0x000000000000-0x000000080000 : "Bootloader"
0x000000080000-0x000000580000 : "Kernel"
0x000000580000-0x000080000000 : "File System"
mtd: partition "File System" doesn't start on an erase block boundary -- force r
ead-only
kernel BUG at drivers/mtd/nand/nand_base.c:217!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT
last sysfs file:
Modules linked in:
CPU: 0    Not tainted  (2.6.36-FriendlyARM #7)
PC is at __bug+0x1c/0x28
LR is at __bug+0x18/0x28
pc : [<c016b50c>]    lr : [<c016b508>]    psr: 60000013
sp : cd429e50  ip : 00002f00  fp : 00000000
r10: 00000001  r9 : 00000002  r8 : 0000003f
r7 : ccccc000  r6 : ccccc1a8  r5 : 00000000  r4 : 00000001
r3 : 00000000  r2 : cd429e44  r1 : c064e5b6  r0 : 00000036
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 00c5387d  Table: 50004008  DAC: 00000017
Process swapper (pid: 1, stack limit = 0xcd428268)
Stack: (0xcd429e50 to 0xcd42a000)
9e40:                                     c031c26c c031c2a4 c031c26c c031eb24
9e60: 00000000 00000001 00000000 ccccc000 cd41cc50 000001b0 7fa00000 c031c888
9e80: 00000001 00000000 7ff80000 00100000 cd725c00 c031c8d4 00000001 00000000
9ea0: 7ff80000 c0318158 80000000 00000000 c0682bbc c01d5070 c06f87a4 00000003
9ec0: ccccc1a8 ccccc1a8 00000000 c0713318 c0765b88 cd448200 00000000 c0712f10
9ee0: c03211a4 c0321c9c 00000000 00000002 cd429e80 c06fdff8 c06fdff8 c07134a4
9f00: c07134a4 00000000 00000000 00000000 00000000 c02ffa08 c02ff9f4 c02febf4
9f20: 00000000 c06fdff8 c06fe02c c07134a4 00000000 c02fed04 c07134a4 cd429f48
9f40: c02feca4 c02fdec8 cd401dc8 cd44a040 c07134a4 c07134a4 cd7390c0 c0711870
9f60: 00000000 c02fe57c c06502d5 c06502d5 cd429f68 c07134a4 c002550c c0168e54
9f80: c001a7ec 00000000 00000000 c02fef50 00000000 c07133f8 c002550c c0168e54
9fa0: c001a7ec 00000000 00000000 c001a814 c002521c c01674a4 00000000 c0160000
9fc0: 00000013 000000f5 c0708434 c002521c c002550c c0168e54 00000013 00000000
9fe0: 00000000 c0008af8 00000000 00000000 c0008a60 c0168e54 ffffffff ffffffff
[<c016b50c>] (__bug+0x1c/0x28) from [<c031c2a4>] (nand_select_chip+0x38/0x3c)
[<c031c2a4>] (nand_select_chip+0x38/0x3c) from [<c031eb24>] (nand_block_bad+0x88
/0x138)
[<c031eb24>] (nand_block_bad+0x88/0x138) from [<c031c888>] (nand_block_checkbad+
0x28/0x40)
[<c031c888>] (nand_block_checkbad+0x28/0x40) from [<c031c8d4>] (nand_block_isbad
+0x34/0x40)
[<c031c8d4>] (nand_block_isbad+0x34/0x40) from [<c0318158>] (add_mtd_partitions+
0x5ac/0x6b4)
[<c0318158>] (add_mtd_partitions+0x5ac/0x6b4) from [<c0321c9c>] (s3c_nand_probe+
0x348/0x3dc)
[<c0321c9c>] (s3c_nand_probe+0x348/0x3dc) from [<c02ffa08>] (platform_drv_probe+
0x14/0x18)
[<c02ffa08>] (platform_drv_probe+0x14/0x18) from [<c02febf4>] (driver_probe_devi
ce+0xa8/0x158)
[<c02febf4>] (driver_probe_device+0xa8/0x158) from [<c02fed04>] (__driver_attach
+0x60/0x84)
[<c02fed04>] (__driver_attach+0x60/0x84) from [<c02fdec8>] (bus_for_each_dev+0x4
c/0x78)
[<c02fdec8>] (bus_for_each_dev+0x4c/0x78) from [<c02fe57c>] (bus_add_driver+0x94
/0x210)
[<c02fe57c>] (bus_add_driver+0x94/0x210) from [<c02fef50>] (driver_register+0xa8
/0x12c)
[<c02fef50>] (driver_register+0xa8/0x12c) from [<c001a814>] (s3c_nand_init+0x28/
0x3c)
[<c001a814>] (s3c_nand_init+0x28/0x3c) from [<c01674a4>] (do_one_initcall+0xbc/0
x190)
[<c01674a4>] (do_one_initcall+0xbc/0x190) from [<c0008af8>] (kernel_init+0x98/0x
14c)
[<c0008af8>] (kernel_init+0x98/0x14c) from [<c0168e54>] (kernel_thread_exit+0x0/
0x8)
Code: e59f0010 e1a01003 eb0e4439 e3a03000 (e5833000)
---[ end trace d44e214d7673c35e ]---
Kernel panic - not syncing: Attempted to kill init!
[<c016d464>] (unwind_backtrace+0x0/0xe4) from [<c04fc4d4>] (panic+0x58/0x174)
[<c04fc4d4>] (panic+0x58/0x174) from [<c0187848>] (do_exit+0x68/0x5cc)
[<c0187848>] (do_exit+0x68/0x5cc) from [<c016ba40>] (die+0x190/0x1c0)
[<c016ba40>] (die+0x190/0x1c0) from [<c016e368>] (__do_kernel_fault+0x64/0x84)
[<c016e368>] (__do_kernel_fault+0x64/0x84) from [<c016e560>] (do_page_fault+0x1d
8/0x1f4)
[<c016e560>] (do_page_fault+0x1d8/0x1f4) from [<c0167218>] (do_DataAbort+0x30/0x
98)
[<c0167218>] (do_DataAbort+0x30/0x98) from [<c01679ec>] (__dabt_svc+0x4c/0x60)
Exception stack(0xcd429e08 to 0xcd429e50)
9e00:                   00000036 c064e5b6 cd429e44 00000000 00000001 00000000
9e20: ccccc1a8 ccccc000 0000003f 00000002 00000001 00000000 00002f00 cd429e50
9e40: c016b508 c016b50c 60000013 ffffffff
[<c01679ec>] (__dabt_svc+0x4c/0x60) from [<c016b50c>] (__bug+0x1c/0x28)
[<c016b50c>] (__bug+0x1c/0x28) from [<c031c2a4>] (nand_select_chip+0x38/0x3c)
[<c031c2a4>] (nand_select_chip+0x38/0x3c) from [<c031eb24>] (nand_block_bad+0x88
/0x138)
[<c031eb24>] (nand_block_bad+0x88/0x138) from [<c031c888>] (nand_block_checkbad+
0x28/0x40)
[<c031c888>] (nand_block_checkbad+0x28/0x40) from [<c031c8d4>] (nand_block_isbad
+0x34/0x40)
[<c031c8d4>] (nand_block_isbad+0x34/0x40) from [<c0318158>] (add_mtd_partitions+
0x5ac/0x6b4)
[<c0318158>] (add_mtd_partitions+0x5ac/0x6b4) from [<c0321c9c>] (s3c_nand_probe+
0x348/0x3dc)
[<c0321c9c>] (s3c_nand_probe+0x348/0x3dc) from [<c02ffa08>] (platform_drv_probe+
0x14/0x18)
[<c02ffa08>] (platform_drv_probe+0x14/0x18) from [<c02febf4>] (driver_probe_devi
ce+0xa8/0x158)
[<c02febf4>] (driver_probe_device+0xa8/0x158) from [<c02fed04>] (__driver_attach
+0x60/0x84)
[<c02fed04>] (__driver_attach+0x60/0x84) from [<c02fdec8>] (bus_for_each_dev+0x4
c/0x78)
[<c02fdec8>] (bus_for_each_dev+0x4c/0x78) from [<c02fe57c>] (bus_add_driver+0x94
/0x210)
[<c02fe57c>] (bus_add_driver+0x94/0x210) from [<c02fef50>] (driver_register+0xa8
/0x12c)
[<c02fef50>] (driver_register+0xa8/0x12c) from [<c001a814>] (s3c_nand_init+0x28/
0x3c)
[<c001a814>] (s3c_nand_init+0x28/0x3c) from [<c01674a4>] (do_one_initcall+0xbc/0
x190)
[<c01674a4>] (do_one_initcall+0xbc/0x190) from [<c0008af8>] (kernel_init+0x98/0x
14c)
[<c0008af8>] (kernel_init+0x98/0x14c) from [<c0168e54>] (kernel_thread_exit+0x0/
0x8)
Load Kernel...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.36-FriendlyARM (root@jensen) (gcc version 4.5.1 (ctng-1.8.1-FA
) ) #7 PREEMPT Tue Jan 4 14:05:27 HKT 2011
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: MINI6410
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
camera: no parent clock specified
S3C64XX: PLL settings, A=532000000, M=266000000, E=84666666
S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
mout_apll: source is fout_apll (1), rate is 532000000
mout_epll: source is epll (1), rate is 84666666
mout_mpll: source is mpll (1), rate is 266000000
mmc_bus: source is mout_epll (0), rate is 84666666
mmc_bus: source is mout_epll (0), rate is 84666666
mmc_bus: source is mout_epll (0), rate is 84666666
usb-bus-host: source is clk_48m (0), rate is 48000000
uclk1: source is mout_epll (0), rate is 84666666
spi-bus: source is mout_epll (0), rate is 84666666
spi-bus: source is mout_epll (0), rate is 84666666
audio-bus: source is mout_epll (0), rate is 84666666
audio-bus: source is mout_epll (0), rate is 84666666
audio-bus: source is mout_epll (0), rate is 84666666
irda-bus: source is mout_epll (0), rate is 84666666
camera: no parent clock specified
s3c64xx: 10485760 bytes SDRAM reserved for fimc at 0x5f5f8000
s3c64xx: 8388608 bytes SDRAM reserved for pp at 0x5edf8000
s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x5e5f8000
s3c64xx: 6291456 bytes SDRAM reserved for mfc at 0x5dff8000
s3c64xx: 4194304 bytes SDRAM reserved for jpeg at 0x5dbf8000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: root=/dev/mtdblock2 rootfstype=ubifs init=/linuxrc console=
ttySAC0,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 215360k/215360k available, 46784k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff600000 - 0xffe00000   (   8 MB)
    vmalloc : 0xd0800000 - 0xe0000000   ( 248 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0167000   (1404 kB)
      .text : 0xc0167000 - 0xc06d5000   (5560 kB)
      .data : 0xc06f6000 - 0xc0735b20   ( 255 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:246
VIC @f4000000: id 0x00041192, vendor 0x41
VIC @f4010000: id 0x00041192, vendor 0x41
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
s3c64xx_dma_init: Registering DMA channels
s3c64xx_dma_init1: registering DMA 0 (d0808100)
s3c64xx_dma_init1: registering DMA 1 (d0808120)
s3c64xx_dma_init1: registering DMA 2 (d0808140)
s3c64xx_dma_init1: registering DMA 3 (d0808160)
s3c64xx_dma_init1: registering DMA 4 (d0808180)
s3c64xx_dma_init1: registering DMA 5 (d08081a0)
s3c64xx_dma_init1: registering DMA 6 (d08081c0)
s3c64xx_dma_init1: registering DMA 7 (d08081e0)
PL080: IRQ 73, at d0808000
s3c64xx_dma_init1: registering DMA 8 (d080c100)
s3c64xx_dma_init1: registering DMA 9 (d080c120)
s3c64xx_dma_init1: registering DMA 10 (d080c140)
s3c64xx_dma_init1: registering DMA 11 (d080c160)
s3c64xx_dma_init1: registering DMA 12 (d080c180)
s3c64xx_dma_init1: registering DMA 13 (d080c1a0)
s3c64xx_dma_init1: registering DMA 14 (d080c1c0)
s3c64xx_dma_init1: registering DMA 15 (d080c1e0)
PL080: IRQ 74, at d080c000
S3C6410: Initialising architecture
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c: slave address 0x10
s3c-i2c s3c2440-i2c: bus frequency set to 64 KHz
s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.23.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 128 (order: 0, 6144 bytes)
UDP-Lite hash table entries: 128 (order: 0, 6144 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 420
io scheduler noop registered (default)
S3C_LCD clock got enabled :: 133.000 Mhz
LCD TYPE :: N43 will be initialized
Window[0] - FB1: map_video_memory: clear ff600000:0007f800
            FB1: map_video_memory: dma=5d780000 cpu=ff600000 size=0007f800
Window[0] - FB2: map_video_memory: clear ff63fc00:0003fc00
            FB2: map_video_memory: dma=5d7bfc00 cpu=ff63fc00 size=0003fc00
Console: switching to colour frame buffer device 60x34
fb0: s3cfb frame buffer device
Window[1] - FB1: map_video_memory: clear ff700000:0007f800
            FB1: map_video_memory: dma=5cc00000 cpu=ff700000 size=0007f800
Window[1] - FB2: map_video_memory: clear ff73fc00:0003fc00
            FB2: map_video_memory: dma=5cc3fc00 cpu=ff73fc00 size=0003fc00
fb1: s3cfb frame buffer device
Window[2] - FB1: map_video_memory: clear ff680000:0003fc00
            FB1: map_video_memory: dma=5d740000 cpu=ff680000 size=0003fc00
fb2: s3cfb frame buffer device
Window[3] - FB1: map_video_memory: clear ff780000:0003fc00
            FB1: map_video_memory: dma=5cc80000 cpu=ff780000 size=0003fc00
fb3: s3cfb frame buffer device
backlight       initialized
leds    initialized
buttons initialized
pwm     initialized
adc     initialized
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
loop: module loaded
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)

Creating 3 MTD partitions on "NAND 2GiB 3,3V 8-bit":
0x000000000000-0x000000080000 : "Bootloader"
0x000000080000-0x000000580000 : "Kernel"
0x000000580000-0x000080000000 : "File System"
mtd: partition "File System" doesn't start on an erase block boundary -- force r
ead-only
kernel BUG at drivers/mtd/nand/nand_base.c:217!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT
last sysfs file:
Modules linked in:
CPU: 0    Not tainted  (2.6.36-FriendlyARM #7)
PC is at __bug+0x1c/0x28
LR is at __bug+0x18/0x28
pc : [<c016b50c>]    lr : [<c016b508>]    psr: 60000013
sp : cd429e50  ip : 00002f00  fp : 00000000
r10: 00000001  r9 : 00000002  r8 : 0000003f
r7 : ccccc000  r6 : ccccc1a8  r5 : 00000000  r4 : 00000001
r3 : 00000000  r2 : cd429e44  r1 : c064e5b6  r0 : 00000036
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 00c5387d  Table: 50004008  DAC: 00000017
Process swapper (pid: 1, stack limit = 0xcd428268)
Stack: (0xcd429e50 to 0xcd42a000)
9e40:                                     c031c26c c031c2a4 c031c26c c031eb24
9e60: 00000000 00000001 00000000 ccccc000 cd41cc50 000001b0 7fa00000 c031c888
9e80: 00000001 00000000 7ff80000 00100000 cccc0400 c031c8d4 00000001 00000000
9ea0: 7ff80000 c0318158 80000000 00000000 c0682bbc c01d5070 c06f87a4 00000003
9ec0: ccccc1a8 ccccc1a8 00000000 c0713318 c0765b88 cd448200 00000000 c0712f10
9ee0: c03211a4 c0321c9c 00000000 00000002 cd429e80 c06fdff8 c06fdff8 c07134a4
9f00: c07134a4 00000000 00000000 00000000 00000000 c02ffa08 c02ff9f4 c02febf4
9f20: 00000000 c06fdff8 c06fe02c c07134a4 00000000 c02fed04 c07134a4 cd429f48
9f40: c02feca4 c02fdec8 cd401dc8 cd44a040 c07134a4 c07134a4 cd7390c0 c0711870
9f60: 00000000 c02fe57c c06502d5 c06502d5 cd429f68 c07134a4 c002550c c0168e54
9f80: c001a7ec 00000000 00000000 c02fef50 00000000 c07133f8 c002550c c0168e54
9fa0: c001a7ec 00000000 00000000 c001a814 c002521c c01674a4 00000000 c0160000
9fc0: 00000013 000000f5 c0708434 c002521c c002550c c0168e54 00000013 00000000
9fe0: 00000000 c0008af8 00000000 00000000 c0008a60 c0168e54 ffffffff ffffffff
[<c016b50c>] (__bug+0x1c/0x28) from [<c031c2a4>] (nand_select_chip+0x38/0x3c)
[<c031c2a4>] (nand_select_chip+0x38/0x3c) from [<c031eb24>] (nand_block_bad+0x88
/0x138)
[<c031eb24>] (nand_block_bad+0x88/0x138) from [<c031c888>] (nand_block_checkbad+
0x28/0x40)
[<c031c888>] (nand_block_checkbad+0x28/0x40) from [<c031c8d4>] (nand_block_isbad
+0x34/0x40)
[<c031c8d4>] (nand_block_isbad+0x34/0x40) from [<c0318158>] (add_mtd_partitions+
0x5ac/0x6b4)
[<c0318158>] (add_mtd_partitions+0x5ac/0x6b4) from [<c0321c9c>] (s3c_nand_probe+
0x348/0x3dc)
[<c0321c9c>] (s3c_nand_probe+0x348/0x3dc) from [<c02ffa08>] (platform_drv_probe+
0x14/0x18)
[<c02ffa08>] (platform_drv_probe+0x14/0x18) from [<c02febf4>] (driver_probe_devi
ce+0xa8/0x158)
[<c02febf4>] (driver_probe_device+0xa8/0x158) from [<c02fed04>] (__driver_attach
+0x60/0x84)
[<c02fed04>] (__driver_attach+0x60/0x84) from [<c02fdec8>] (bus_for_each_dev+0x4
c/0x78)
[<c02fdec8>] (bus_for_each_dev+0x4c/0x78) from [<c02fe57c>] (bus_add_driver+0x94
/0x210)
[<c02fe57c>] (bus_add_driver+0x94/0x210) from [<c02fef50>] (driver_register+0xa8
/0x12c)
[<c02fef50>] (driver_register+0xa8/0x12c) from [<c001a814>] (s3c_nand_init+0x28/
0x3c)
[<c001a814>] (s3c_nand_init+0x28/0x3c) from [<c01674a4>] (do_one_initcall+0xbc/0
x190)
[<c01674a4>] (do_one_initcall+0xbc/0x190) from [<c0008af8>] (kernel_init+0x98/0x
14c)
[<c0008af8>] (kernel_init+0x98/0x14c) from [<c0168e54>] (kernel_thread_exit+0x0/
0x8)
Code: e59f0010 e1a01003 eb0e4439 e3a03000 (e5833000)
---[ end trace 1ac06d5256eaf8c1 ]---
Kernel panic - not syncing: Attempted to kill init!
[<c016d464>] (unwind_backtrace+0x0/0xe4) from [<c04fc4d4>] (panic+0x58/0x174)
[<c04fc4d4>] (panic+0x58/0x174) from [<c0187848>] (do_exit+0x68/0x5cc)
[<c0187848>] (do_exit+0x68/0x5cc) from [<c016ba40>] (die+0x190/0x1c0)
[<c016ba40>] (die+0x190/0x1c0) from [<c016e368>] (__do_kernel_fault+0x64/0x84)
[<c016e368>] (__do_kernel_fault+0x64/0x84) from [<c016e560>] (do_page_fault+0x1d
8/0x1f4)
[<c016e560>] (do_page_fault+0x1d8/0x1f4) from [<c0167218>] (do_DataAbort+0x30/0x
98)
[<c0167218>] (do_DataAbort+0x30/0x98) from [<c01679ec>] (__dabt_svc+0x4c/0x60)
Exception stack(0xcd429e08 to 0xcd429e50)
9e00:                   00000036 c064e5b6 cd429e44 00000000 00000001 00000000
9e20: ccccc1a8 ccccc000 0000003f 00000002 00000001 00000000 00002f00 cd429e50
9e40: c016b508 c016b50c 60000013 ffffffff
[<c01679ec>] (__dabt_svc+0x4c/0x60) from [<c016b50c>] (__bug+0x1c/0x28)
[<c016b50c>] (__bug+0x1c/0x28) from [<c031c2a4>] (nand_select_chip+0x38/0x3c)
[<c031c2a4>] (nand_select_chip+0x38/0x3c) from [<c031eb24>] (nand_block_bad+0x88
/0x138)
[<c031eb24>] (nand_block_bad+0x88/0x138) from [<c031c888>] (nand_block_checkbad+
0x28/0x40)
[<c031c888>] (nand_block_checkbad+0x28/0x40) from [<c031c8d4>] (nand_block_isbad
+0x34/0x40)
[<c031c8d4>] (nand_block_isbad+0x34/0x40) from [<c0318158>] (add_mtd_partitions+
0x5ac/0x6b4)
[<c0318158>] (add_mtd_partitions+0x5ac/0x6b4) from [<c0321c9c>] (s3c_nand_probe+
0x348/0x3dc)
[<c0321c9c>] (s3c_nand_probe+0x348/0x3dc) from [<c02ffa08>] (platform_drv_probe+
0x14/0x18)
[<c02ffa08>] (platform_drv_probe+0x14/0x18) from [<c02febf4>] (driver_probe_devi
ce+0xa8/0x158)
[<c02febf4>] (driver_probe_device+0xa8/0x158) from [<c02fed04>] (__driver_attach
+0x60/0x84)
[<c02fed04>] (__driver_attach+0x60/0x84) from [<c02fdec8>] (bus_for_each_dev+0x4
c/0x78)
[<c02fdec8>] (bus_for_each_dev+0x4c/0x78) from [<c02fe57c>] (bus_add_driver+0x94
/0x210)
[<c02fe57c>] (bus_add_driver+0x94/0x210) from [<c02fef50>] (driver_register+0xa8
/0x12c)
[<c02fef50>] (driver_register+0xa8/0x12c) from [<c001a814>] (s3c_nand_init+0x28/
0x3c)
[<c001a814>] (s3c_nand_init+0x28/0x3c) from [<c01674a4>] (do_one_initcall+0xbc/0
x190)
[<c01674a4>] (do_one_initcall+0xbc/0x190) from [<c0008af8>] (kernel_init+0x98/0x
14c)
[<c0008af8>] (kernel_init+0x98/0x14c) from [<c0168e54>] (kernel_thread_exit+0x0/
0x8)
自由,自强,共享,共创。
级别: 论坛版主
UID: 12573
精华: 27
发帖: 8838
金钱: 46490 两
威望: 9298 点
综合积分: 18216 分
注册时间: 2010-01-09
最后登录: 2019-07-16
7楼  发表于: 2012-07-16 14:56

 Re:Tiny6410 以NandFlash方式启动不了

你用的哪个型号的屏?在手册中搜"LCD_TYPE"看如何定义
新手如何向我们反馈有效的信息,以便解决问题,见此贴:
http://www.arm9home.net/read.php?tid-14431.html

[注]: 此处签名链接仅为指引方向,而非解答问题本身.
学精嵌入式
级别: 新手上路
UID: 73636
精华: 0
发帖: 18
金钱: 90 两
威望: 18 点
综合积分: 36 分
注册时间: 2012-07-12
最后登录: 2012-08-20
8楼  发表于: 2012-07-16 16:31

 回 7楼(mindee) 的帖子

我在手册中搜不到LCD_TYPE的定义,不过我在买的时侯产品上说LCD是4.3的,在自动安装Linux成功时终端上显示LCD Type: Unknown
下面这个是在淘宝买时产品的说明:
友善之臂Tiny6410开发板4.3LCD Android2.3 S3C6410 ARM11开发板
自由,自强,共享,共创。
级别: 论坛版主
UID: 12573
精华: 27
发帖: 8838
金钱: 46490 两
威望: 9298 点
综合积分: 18216 分
注册时间: 2010-01-09
最后登录: 2019-07-16
9楼  发表于: 2012-07-16 18:49

 Re:Tiny6410 以NandFlash方式启动不了

可以拍图片看看
新手如何向我们反馈有效的信息,以便解决问题,见此贴:
http://www.arm9home.net/read.php?tid-14431.html

[注]: 此处签名链接仅为指引方向,而非解答问题本身.
  • «
  • 1
  • 2
  • »
  • Pages: 1/2     Go