主题 : 启动开发板时出现的问题 复制链接 | 浏览器收藏 | 打印
级别: 新手上路
UID: 3497
精华: 0
发帖: 3
金钱: 30 两
威望: 30 点
综合积分: 6 分
注册时间: 2009-01-14
最后登录: 2009-02-02
楼主  发表于: 2009-02-02 13:28

 启动开发板时出现的问题

s3c2410-sdi s3c2410-sdi: running at 198kHz (requested: 197kHz).
s3c2410-sdi s3c2410-sdi: running at 198kHz (requested: 197kHz).
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card
s3c2410-sdi s3c2410-sdi: running at 198kHz (requested: 197kHz).
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card
s3c2410-sdi s3c2410-sdi: s3cmci_request: no card
s3c2410-sdi s3c2410-sdi: powered down.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing init memory: 144K
Kernel panic - not syncing: No init found.  Try passing init= option to kernel.
级别: 新手上路
UID: 3464
精华: 0
发帖: 11
金钱: 120 两
威望: 120 点
综合积分: 22 分
注册时间: 2009-01-12
最后登录: 2009-12-23
1楼  发表于: 2009-02-02 15:11
没找到init文件,或者无法执行init

可能原因:
1)mtd分区没挂上来,比如没有对应的文件系统支持
2)init设置错误,板子上设置缺省的为linuxrc,如果rootfs没有这个文件就无法执行.
3)init文件无法执行(比如有些init需要内核支持eabi,或者需要内核支持软件方式浮点运算,内核没编译进去就会出现这样一来的问题)