这是我板子的启动信息，SBC2410的板子，内核zImage和文件系统都是光盘里的， 为什么下载后出现 devfs mount不上 initi也找不到呢，，难道是linux_cmd_line不对：：：
noinitrd root=/dev/mtdblock/0 init=/linuxrc console=ttyS0
init=/sbin/init 也试过 还是老毛病。 求解。。。。。
内核是2.4的 文件系统是root_qtopia_tp.img
VIVI version 0.1.4 (
root@localhost.localdomain) (gcc version 2.95.3 20010315 (release)) #0.1.4 Sun Jul 2 18:43:06 EDT 2006
MMU table base address = 0x33FBC000
Succeed memory mapping.
+---------------------------------------------+
| S3C2410X USB Downloader ver R1.11 SEP/03/02 |
+---------------------------------------------+
FCLK=200MHz,DMA mode
USB: IN_ENDPOINT:1 OUT_ENDPOINT:3
FORMAT: <ADDR(DATA):4>+<SIZE(n+10):4>+<DATA:n>+<CS:2>
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Found saved vivi parameters.
Press Return to start the LINUX/Wince now, any other key for vivi
type "help" for help.
FriendlyARM>
FriendlyARM> param show
Number of parameters: 9
name : hex integer
-------------------------------------------------------------
mach_type : 000000c1 193
media_type : 00000003 3
boot_mem_base : 30000000 805306368
baudrate : 0001c200 115200
xmodem_one_nak : 00000000 0
xmodem_initial_timeout : 00989680 10000000
xmodem_timeout : 01c9c380 30000000
ymodem_initial_timeout : 0016e360 1500000
boot_delay : 00001000 4096
Linux command line: noinitrd root=/dev/mtdblock/4 init=/sbin/init console=ttyS0
FriendlyARM> boot
Copy linux kernel from 0x00050000 to 0x30008000, size = 0x00100000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock/4 init=/sbin/init console=ttyS0"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux.............................................................. done, booting the kernel.
Linux version 2.4.18-rmk7-pxa1 (root@vmwarelinux) (gcc version 2.95.3 20010315 (release)) #31 Wed Jan 17 11:22:20 CST 2007
CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
Security risk: creating user accessible mapping for 0x08000000 at 0xe0000000
Security risk: creating user accessible mapping for 0x10000000 at 0xe0100000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: noinitrd root=/dev/mtdblock/4 init=/sbin/init console=ttyS0DEBUG: timer count 15626
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62416KB available (1546K code, 411K data, 92K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock = 200.000 Mhz, HCLK = 100.000 Mhz, PCLK = 50.000 Mhz
Initializing S3C2410 buffer pool for DMA workaround
S3C2410 USB Controller Core Initialized
USB Function Character Driver Interface - 0.5, (C) 2001, Extenex Corp.
usbctl: Opened for usb-char
usbctl: Started for usb-char
Starting kswapd
devfs: v1.10 (20020120) Richard Gooch (
rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410
ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410
ttyS%d2 at I/O 0x50008000 (irq = 58) is a S3C2410
640x480 LCD
640x480 LCD
Console: switching to colour frame buffer device 80x30
Installed S3C2410 frame buffer
pty: 256 Unix98 ptys configured
leds initialized
touchpanel: installed
S3C2410 Real Time Clock Driver v0.1
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
eth0: cs8900 rev K(3.3 Volts) found at 0xd0000300
cs89x0 media RJ-45, IRQ 37
PPP generic driver version 2.4.1
Linux video capture interface: v1.00
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
UDA1341 audio driver initialized
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
bon0: 00000000-00030000 (00030000) 00000000
bon1: 00030000-00130000 (00100000) 00000000
bon2: 00130000-03ffc000 (03ecc000) 00000000
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe9000000, IRQ 26
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
port #1 suspened!
port #0 alived!
hub.c: 1 port detected
usb.c: registered new driver usblp
printer.c: v0.8:USB Printer Device Class driver
usb.c: registered new driver ov511
ov511.c: v1.48a for Linux 2.4 : OV511 USB Camera Driver
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
yaffs: dev is 7936 name is "1f:00"
VFS: Mounted root (yaffs filesystem).
Warning: unable to mount devfs, err: -2
Freeing init memory: 92K
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel.
