关于uImage的问题

我用版主提供的方法打补丁，但总是显示有错，打不了补丁，
用mkimage生成uImage 用u-boot烧进nandflash 内核不能运行，
显示： Image Name:   Linux Kernel Image                                            
   Created:      2009-04-04   5:01:09 UTC                                      
   Image Type:   ARM Linux Kernel Image (gzip compressed)                      
   Data Size:    1524602 Bytes =  1.5 MB                                        
   Load Address: 30008000                                                      
   Entry Point:  30008000                                                      
   Verifying Checksum ... OK                                                    
   Uncompressing Kernel Image ... Error: inflate() returned -3                  
GUNZIP ERROR - must RESET board to recover

把0x30008000改为0x31000000显示
Image Name:   Linux Kernel Image                                            
   Created:      2009-04-04   5:14:36 UTC                                      
   Image Type:   ARM Linux Kernel Image (gzip compressed)                      
   Data Size:    1524602 Bytes =  1.5 MB                                       
   Load Address: 31000000                                                      
   Entry Point:  31000000                                                      
   Verifying Checksum ... OK                                                   
   Uncompressing Kernel Image ... OK                                           
                                                                               
Starting kernel ...                  
然后就一直停在这里不动了，我以为是MACH_TYPE不对，但是查阅了内核和open24x0的machtype，发现数值是一样的都是782，所以不知哪里出问题了

自己顶一下

再顶一下

顶完再顶

Image Type:   ARM Linux Kernel Image (gzip compressed)  

如果你是按照补丁修改的， 这里应该显示(uncompressed)。 我建议你不要自己修改，还是用下载的补丁。你把打补丁出错的步骤和信息贴出来我看看吧

信息如下：[root@localhost kernel-2.6.13]# patch -p1 < /root/uImage.patch
patching file arch/arm/Makefile
patch: **** malformed patch at line 6: # Convert bzImage to zImage

这是我用的补丁

我是在linux环境(fedora9+firefox3)复制下来，然后在gedit中编辑的

用千斤顶顶！！

我重新制作了补丁， 你可以从http://www.aiothome.com/bbs/read.php?tid=1209&page=1&toread=1#3956 下载