今天将友善提供的android源码进行编译之后烧到SD卡里面，启动开发板出现下面的错误，无法进入文件系统??
难道友善提供的源码和自带的镜像不是一个源码编译出的吗？？？

[    2.721013] logger: created 64K log 'log_system'
[    2.726032] S5PC11X RP driver, (c) 2010 Samsung Electronics
[    2.731133] ALSA device list:
[    2.734013]   No soundcards found.
[    2.737413] GACT probability NOT on
[    2.740865] Mirror/redirect action on
[    2.744501] u32 classifier
[    2.747168]     Actions configured
[    2.750564] Netfilter messages via NETLINK v0.30.
[    2.755299] nf_conntrack version 0.5.0 (5366 buckets, 21464 max)
[    2.761376] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
[    2.768590] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
option or
[    2.776476] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    2.783219] ctnetlink v0.93: registering with nfnetlink.
[    2.788026] xt_time: kernel timezone is -0000
[    2.794168] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.797632] arp_tables: (C) 2002 David S. Miller
[    2.802203] TCP cubic registered
[    2.805364] NET: Registered protocol family 10
[    2.811340] lo: Disabled Privacy Extensions
[    2.819056] Mobile IPv6
[    2.819087] IPv6 over IPv4 tunneling driver
[    2.821922] sit0: Disabled Privacy Extensions
[    2.827500] ip6tnl0: Disabled Privacy Extensions
[    2.830652] NET: Registered protocol family 17
[    2.833862] NET: Registered protocol family 15
[    2.840382] Bluetooth: L2CAP ver 2.14
[    2.841910] Bluetooth: L2CAP socket layer initialized
[    2.846938] Bluetooth: SCO (Voice Link) ver 0.6
[    2.851431] Bluetooth: SCO socket layer initialized
[    2.856366] Bluetooth: RFCOMM TTY layer initialized
[    2.861170] Bluetooth: RFCOMM socket layer initialized
[    2.866253] Bluetooth: RFCOMM ver 1.11
[    2.869975] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.875262] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.881229] ThumbEE CPU extension supported.
[    2.885513] VFP support v0.3: implementor 41 architecture 3 part 30 variant c
rev 2
[    2.893403] regulator_init_complete: disabling pd_mfc_supply
[    2.898677] regulator_init_complete: disabling pd_tv_supply
[    2.904211] regulator_init_complete: disabling pd_cam_supply
[    2.909883] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[    2.915836] smdkc110-rtc smdkc110-rtc: setting system clock to 1970-01-02 01:
50:48 UTC (93048)
[    2.925832] FIMC0 registered successfully
[    2.929661] FIMC1 registered successfully
[    2.933602] FIMC2 registered successfully
[    2.936409] <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[    2.943056] s5p-tvout s5p-tvout: hpd status is cable removed
[    2.954030] DBUG_PORT must not use AFC!
[    2.954294] Freeing init memory: 1428K
[    2.981643] yaffs: dev is 32505860 name is "mtdblock4" rw
[    2.981694] yaffs: passed flags ""
[    3.346435] mmc0: new high speed SDHC card at address e624
[    3.350742] mmcblk0: mmc0:e624 SU04G 3.69 GiB
[    3.351014]  mmcblk0: p1
[   11.478953] init: cannot open '/initlogo.rle'
[   12.463200] enabling adb
[   12.488742] Enabled => usb_mass_storage
[   12.488780] Enabled => adb
[   12.501892] adb_open
/ # [   14.314467] PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110
[478, drivers/gpu/pvr/s5pc110/sysconfig.c]
[   15.048192] s3c_idma_preallocate_buffer:  VA-e0940000  PA-C0000000  163840byt
es
[   15.048785] asoc: WM8960 <-> s5pc1xx-i2s mapping ok
[   16.071386] Compat-wireless backport release: compat-wireless-2012-02-28
[   16.071450] Backport based on linux-next.git next-20120228
[   16.432305] cfg80211: Calling CRDA to update world regulatory domain
[   16.643467] libertas_sdio: Libertas SDIO driver
[   16.643515] libertas_sdio: Copyright Pierre Ossman
[   18.056565] usbcore: registered new interface driver ath9k_htc
[   18.326375] usbcore: registered new interface driver rt73usb
[   18.560803] usbcore: registered new interface driver rt2800usb
[   19.199943]
[   19.199948] rtw driver version=v3.0.1590.20110511
[   19.200205] usbcore: registered new interface driver rtl8192cu
[   19.299744] usbcore: registered new interface driver zd1211rw
[   27.803564] request_suspend_state: wakeup (3->0) at 27266651419 (1970-01-02 0
1:51:13.386703043 UTC)
[   27.806112] init: untracked pid 61 exited
[   27.806975] init: untracked pid 55 exited
[   28.342626] request_suspend_state: wakeup (0->0) at 27805714211 (1970-01-02 0
1:51:13.925765876 UTC)
[   28.344915] init: untracked pid 116 exited
[   28.345586] init: untracked pid 117 exited
[   33.744727] request_suspend_state: wakeup (0->0) at 33207815212 (1970-01-02 0
1:51:19.327867085 UTC)
[   33.746960] init: untracked pid 125 exited
[   33.747564] init: untracked pid 126 exited
有谁能告知这是什么原因吗？？？

请提供详细的信息:
1) kernel版本，是编译好的zImage还是自己编译的，如果是编译好的，请确认没有用Android 4的zImage
2) kernel commandline，最好是帖出启动时完整的信息
3) 是怎么编译的，PC环境，源代码是哪个日期发布的
4) 可以运行logcat，再帖出相关的信息
5) 请说明"烧到SD卡"里是什么意思

1）kernel版本用自己编的和用你们已经编好的出现的问题一样
2）kernel commandline对比你们编好的，信息是一样的
Kernel command line: root=/dev/mtdblock4 console=ttySAC0,115200 init=/linuxrc androidboot.console=s3c2410_serial0 lcd=S70
3）编译的完全按照手册进行操作，不过linux用的是ubuntu11.04，源码是android-2.3.1-fs-20120326.tar.gz
5)将编译好的镜像roots_android.img放到sd卡里，在启动开发板从sd卡启动，然后在nand启动，这样难道有问题吗
完整的log：
Board type: 2
Load Kernel...
Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.7-FriendlyARM (root@seven-virtual-machine) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #1 PREEMPT Fri Jun 29 13:21:30 CST 2012
[    0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: MINI210
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000]   Normal zone: 1 pages exceeds realsize 0
[    0.000000]   Normal zone: 1 pages exceeds realsize 0
[    0.000000] MINI210: S70 selected
[    0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[    0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
[    0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
[    0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
[    0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000
[    0.000000] sclk: source is mout_mpll (6), rate is 66700000
[    0.000000] sclk: source is mout_mpll (6), rate is 66700000
[    0.000000] sclk: source is mout_mpll (6), rate is 66700000
[    0.000000] sclk: source is mout_mpll (6), rate is 66700000
[    0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
[    0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[    0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[    0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[    0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[    0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_mdnie: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
[    0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x20b81000
[    0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x30204000
[    0.000000] s5pv210: 25165824 bytes system memory reserved for fimc0 at 0x32604000
[    0.000000] s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x33e04000
[    0.000000] s5pv210: 25165824 bytes system memory reserved for fimc2 at 0x347af000
[    0.000000] s5pv210: 8388608 bytes system memory reserved for jpeg at 0x22f81000
[    0.000000] s5pv210: 3072000 bytes system memory reserved for fimd at 0x35faf000
[    0.000000] s5pv210: 4194304 bytes system memory reserved for texstream at 0x3629d000
[    0.000000] s5pv210: 5683200 bytes system memory reserved for pmem at 0x23781000
[    0.000000] s5pv210: 3379200 bytes system memory reserved for pmem_gpu1 at 0x23ced000
[    0.000000] s5pv210: 1536000 bytes system memory reserved for pmem_adsp at 0x24026000
[    0.000000] s5pv210: 8388608 bytes system memory reserved for g2d at 0x2419d000
[    0.000000] Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: root=/dev/mtdblock4 console=ttySAC0,115200 init=/linuxrc androidboot.console=s3c2410_serial0 lcd=S70
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 256MB 256MB = 512MB total
[    0.000000] Memory: 343464k/343464k available, 180824k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
[    0.000000]     vmalloc : 0xe0800000 - 0xfc000000   ( 440 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc016d000   (1428 kB)
[    0.000000]       .text : 0xc016d000 - 0xc076a000   (6132 kB)
[    0.000000]       .data : 0xc076a000 - 0xc08afd20   (1304 kB)
[    0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=4
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU-based detection of stalled CPUs is disabled.
[    0.000000]     Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:393
[    0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
[    0.000000] mult[140737]
[    0.000000] max_delta_ns[2937815369]
[    0.000000] min_delta_ns[30517]
[    0.000000] rate[32768]
[    0.000000] HZ[256]
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttySAC0] enabled
[    0.491111] Calibrating delay loop... 998.15 BogoMIPS (lpj=1949696)
[    0.574145] pid_max: default: 32768 minimum: 301
[    0.574234] Mount-cache hash table entries: 512
[    0.574544] Initializing cgroup subsys debug
[    0.574588] Initializing cgroup subsys cpuacct
[    0.574629] Initializing cgroup subsys freezer
[    0.576741] CPU: Testing write buffer coherency: ok
[    0.583580] regulator: core version 0.5
[    0.585503] NET: Registered protocol family 16
[    0.595631] MINI210: S70 selected
[    0.595668] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.599356] pmstats at 00000000
[    0.602602] mini210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.609947] mini210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.617395] mini210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.624846] mini210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.632726] S5PV210: Initializing architecture
[    0.637026] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
[    0.645147] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
[    0.653552] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
[    0.662039] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
[    0.670659] regulator: pd_audio_supply: 5000 mV normal
[    0.675799] regulator: pd_cam_supply: 5000 mV normal
[    0.680822] regulator: pd_tv_supply: 5000 mV normal
[    0.685754] regulator: pd_lcd_supply: 5000 mV normal
[    0.690793] regulator: pd_g3d_supply: 5000 mV normal
[    0.695811] regulator: pd_mfc_supply: 5000 mV normal
[    0.708119] bio: create slab <bio-0> at 0
[    0.708646] SCSI subsystem initialized
[    0.708815] usbcore: registered new interface driver usbfs
[    0.714001] usbcore: registered new interface driver hub
[    0.719285] usbcore: registered new device driver usb
[    0.724687] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[    0.729793] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[    0.735094] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[    0.740644] Advanced Linux Sound Architecture Driver Version 1.0.23.
[    0.747069] Bluetooth: Core ver 2.15
[    0.750263] NET: Registered protocol family 31
[    0.754641] Bluetooth: HCI device and connection manager initialized
[    0.760967] Bluetooth: HCI socket layer initialized
[    0.765843] Switching to clocksource clock_source_systimer
[    0.776534] NET: Registered protocol family 2
[    0.776739] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.783212] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.789982] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[    0.796721] TCP: Hash tables configured (established 16384 bind 16384)
[    0.802827] TCP reno registered
[    0.805938] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.811858] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.818294] NET: Registered protocol family 1
[    0.832630] PMU: registered new PMU device of type 0
[    0.832714] SMDKC110/V210 RTC, (c) 2010 Samsung Electronics
[    0.833009] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[    0.839164] smdkc110-rtc smdkc110-rtc: rtc core: registered s3c as rtc0
[    0.845641] cpuidle: phy_regs_save:0x2ff0b000
[    0.849996] Loaded driver for PL330 DMAC-0 s3c-pl330
[    0.854824]     DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
[    0.860956] Loaded driver for PL330 DMAC-1 s3c-pl330
[    0.865830]     DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.871969] Loaded driver for PL330 DMAC-2 s3c-pl330
[    0.876835]     DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.886999] ashmem: initialized
[    0.887229] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.890351] msgmni has been set to 670
[    0.896468] alg: No test for stdrng (krng)
[    0.898080] io scheduler noop registered
[    0.901991] io scheduler deadline registered
[    0.906217] io scheduler cfq registered (default)
[    0.911466] s3cfb s3cfb: [fb2] dma: 0x35faf000, cpu: 0xe0c00000, size: 0x002ee000
[    0.921096] FIMD src sclk = 166750000
[    1.042490] s3cfb s3cfb: registered successfully
[    1.042534] Start display and show logo
[    1.043294] leds    initialized
[    1.043409] pwm    initialized
[    1.043527] mini210-adc    initialized
[    1.044014] PA FB = 0x35FAF000, bits per pixel = 32
[    1.044061] screen width=800 height=480 va=0xd5faf000 pa=0x35faf000
[    1.048872] xres_virtual = 800, yres_virtual = 960, xoffset = 0, yoffset = 0
[    1.055862] fb_size=3072000
[    1.058641] Back frameBuffer[0].VAddr=d6126000 PAddr=36126000 size=1536000
[    1.065732] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
[    1.073768] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
[    1.081903] s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
[    1.090038] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
[    1.102451] brd: module loaded
[    1.104696] loop: module loaded
[    1.104776] pmem: 1 init
[    1.107094] pmem_gpu1: 1 init
[    1.109939] pmem_adsp: 1 init
[    1.112827] Android kernel panic handler initialized (bind=kpanic)
[    1.119271] S3C NAND Driver, (c) 2008 Samsung Electronics
[    1.124254] S3C NAND Driver is using hardware ECC.
[    1.128938] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
[    1.137503] Creating 5 MTD partitions on "s5pv210-nand":
[    1.142782] 0x0000000c0000-0x000000100000 : "misc"
[    1.148266] 0x000000100000-0x000000600000 : "recovery"
[    1.154701] 0x000000600000-0x000000b00000 : "kernel"
[    1.159600] 0x000000b00000-0x000000e00000 : "ramdisk"
[    1.164055] 0x000000e00000-0x000010000000 : "system"
[    1.238247] PPP generic driver version 2.4.2
[    1.238417] PPP Deflate Compression module registered
[    1.238464] PPP BSD Compression module registered
[    1.238507] NET: Registered protocol family 24
[    1.239916] dm9000 Ethernet Driver, V1.31
[    1.241002] eth0: dm9000a at e0892000,e089800c IRQ 39 MAC: 08:90:00:a0:02:10 (platform data)
[    1.246808] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.253437] s5p-ehci s5p-ehci: s5pv210 EHCI
[    1.257454] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[    1.264529] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
[    1.279185] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[    1.279364] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.281848] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.289057] usb usb1: Product: s5pv210 EHCI
[    1.293216] usb usb1: Manufacturer: Linux 2.6.35.7-FriendlyARM ehci_hcd
[    1.299798] usb usb1: SerialNumber: s5pv210
[    1.304367] hub 1-0:1.0: USB hub found
[    1.307705] hub 1-0:1.0: 1 port detected
[    1.311911] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.317882] s5p-ohci s5p-ohci: s5pv210 OHCI
[    1.321917] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
[    1.328937] s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
[    1.392787] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.392846] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.392908] usb usb2: Product: s5pv210 OHCI
[    1.392946] usb usb2: Manufacturer: Linux 2.6.35.7-FriendlyARM ohci_hcd
[    1.395231] usb usb2: SerialNumber: s5pv210
[    1.399740] hub 2-0:1.0: USB hub found
[    1.403142] hub 2-0:1.0: 1 port detected
[    1.407442] usbcore: registered new interface driver usbserial
[    1.412888] USB Serial support registered for generic
[    1.417918] usbcore: registered new interface driver usbserial_generic
[    1.424360] usbserial: USB Serial Driver core
[    1.428727] USB Serial support registered for aircable
[    1.433863] usbcore: registered new interface driver aircable
[    1.439561] USB Serial support registered for ark3116
[    1.444605] usbcore: registered new interface driver ark3116
[    1.450186] ark3116:v0.6:USB ARK3116 serial/IrDA driver
[    1.455418] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[    1.463670] usbcore: registered new interface driver belkin
[    1.469164] belkin_sa: v1.3:USB Belkin Serial converter driver
[    1.475002] USB Serial support registered for ch341-uart
[    1.480308] usbcore: registered new interface driver ch341
[    1.485751] USB Serial support registered for cp210x
[    1.490718] usbcore: registered new interface driver cp210x
[    1.496197] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[    1.502996] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[    1.510557] usbcore: registered new interface driver cyberjack
[    1.516301] cyberjack: v1.01 Matthias Bruestle
[    1.520721] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[    1.528387] USB Serial support registered for DeLorme Earthmate USB
[    1.534626] USB Serial support registered for HID->COM RS232 Adapter
[    1.540960] USB Serial support registered for Nokia CA-42 V2 Adapter
[    1.547296] usbcore: registered new interface driver cypress
[    1.552875] cypress_m8: v1.10:Cypress USB to Serial Driver
[    1.558365] USB Serial support registered for debug
[    1.563242] usbcore: registered new interface driver debug
[    1.568681] USB Serial support registered for Digi 2 port USB adapter
[    1.575098] USB Serial support registered for Digi 4 port USB adapter
[    1.581526] usbcore: registered new interface driver digi_acceleport
[    1.587797] digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
[    1.596062] USB Serial support registered for Edgeport 2 port adapter
[    1.602474] USB Serial support registered for Edgeport 4 port adapter
[    1.608892] USB Serial support registered for Edgeport 8 port adapter
[    1.615299] USB Serial support registered for EPiC device
[    1.620697] usbcore: registered new interface driver io_edgeport
[    1.626618] io_edgeport: v2.7:Edgeport USB Serial Driver
[    1.631938] USB Serial support registered for Edgeport TI 1 port adapter
[    1.638617] USB Serial support registered for Edgeport TI 2 port adapter
[    1.645311] usbcore: registered new interface driver io_ti
[    1.650706] io_ti: v0.7mode043006:Edgeport USB Serial Driver
[    1.656374] USB Serial support registered for empeg
[    1.661253] usbcore: registered new interface driver empeg
[    1.666650] empeg: v1.3:USB Empeg Mark I/II Driver
[    1.671457] USB Serial support registered for FTDI USB Serial Device
[    1.677883] usbcore: registered new interface driver ftdi_sio
[    1.683462] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[    1.689305] USB Serial support registered for funsoft
[    1.694355] usbcore: registered new interface driver funsoft
[    1.699965] USB Serial support registered for Garmin GPS usb/tty
[    1.705964] usbcore: registered new interface driver garmin_gps
[    1.711801] garmin_gps: v0.33:garmin gps driver
[    1.716340] USB Serial support registered for hp4X
[    1.721118] usbcore: registered new interface driver hp4X
[    1.726442] hp4x: v1.00:HP4x (48/49) Generic Serial driver
[    1.731943] USB Serial support registered for PocketPC PDA
[    1.737486] usbcore: registered new interface driver ipaq
[    1.742735] ipaq: v1.0:USB PocketPC PDA driver
[    1.747195] USB Serial support registered for IPWireless converter
[    1.753366] usbcore: registered new interface driver ipwtty
[    1.758852] ipw: v0.4:IPWireless tty driver
[    1.763052] USB Serial support registered for IR Dongle
[    1.768271] usbcore: registered new interface driver ir-usb
[    1.773757] ir_usb: v0.5:USB IR Dongle driver
[    1.778128] USB Serial support registered for iuu_phoenix
[    1.783529] usbcore: registered new interface driver iuu_phoenix
[    1.789446] iuu_phoenix: v0.11:Infinity USB Unlimited Phoenix driver
[    1.795808] USB Serial support registered for Keyspan - (without firmware)
[    1.802656] USB Serial support registered for Keyspan 1 port adapter
[    1.808979] USB Serial support registered for Keyspan 2 port adapter
[    1.815308] USB Serial support registered for Keyspan 4 port adapter
[    1.821656] usbcore: registered new interface driver keyspan
[    1.827225] keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
[    1.833419] USB Serial support registered for Keyspan PDA
[    1.838790] USB Serial support registered for Keyspan PDA - (prerenumeration)
[    1.845895] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[    1.853902] usbcore: registered new interface driver keyspan_pda
[    1.859807] keyspan_pda: v1.1:USB Keyspan PDA Converter driver
[    1.865653] USB Serial support registered for KL5KUSB105D / PalmConnect
[    1.872263] usbcore: registered new interface driver kl5kusb105d
[    1.878179] kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
[    1.885673] USB Serial support registered for KOBIL USB smart card terminal
[    1.892623] usbcore: registered new interface driver kobil
[    1.898022] kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
[    1.905864] USB Serial support registered for MCT U232
[    1.910994] usbcore: registered new interface driver mct_u232
[    1.916654] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
[    1.923889] USB Serial support registered for Moschip 2 port adapter
[    1.930171] mos7720: 2.1:Moschip USB Serial Driver
[    1.935001] usbcore: registered new interface driver moschip7720
[    1.940963] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[    1.948369] mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
[    1.954239] usbcore: registered new interface driver mos7840
[    1.959850] USB Serial support registered for moto-modem
[    1.965143] usbcore: registered new interface driver moto-modem
[    1.971033] USB Serial support registered for navman
[    1.975991] usbcore: registered new interface driver navman
[    1.981514] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[    1.988466] usbcore: registered new interface driver omninet
[    1.994041] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[    1.999710] USB Serial support registered for opticon
[    2.004756] usbcore: registered new interface driver opticon
[    2.010375] USB Serial support registered for GSM07] Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net
[    2.116181] USB Serial support registered for Sierra USB modem
[    2.122014] usbcore: registered new interface driver sierra
[    2.127489] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[    2.134031] USB Serial support registered for SPCP8x5
[    2.139079] usbcore: registered new interface driver spcp8x5
[    2.144646] spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver
[    2.150584] USB Serial support registered for symbol
[    2.155541] usbcore: registered new interface driver symbol
[    2.161069] USB Serial support registered for TI USB 3410 1 port adapter
[    2.167748] USB Serial support registered for TI USB 5052 2 port adapter
[    2.174441] usbcore: registered new interface driver ti_usb_3410_5052
[    2.180782] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[    2.186980] USB Serial support registered for Handspring Visor / Palm OS
[    2.193650] USB Serial support registered for Sony Clie 3.5
[    2.199198] USB Serial support registered for Sony Clie 5.0
[    2.204767] usbcore: registered new interface driv
[    2.343778] f_rndis init
[    2.346359] android_register_function rndis
[    2.350458] rndis_function_bind_config MAC: 02:4D:48:46:48:3B
[    2.356197] android_usb gadget: using random self ethernet address
[    2.362338] android_usb gadget: using random host ethernet address
[    2.369305] usb0: MAC 1e:32:cb:56:25:ad
[    2.372277] usb0: HOST MAC 32:84:a7:18:be:c4
[    2.376754] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.383393] android_usb gadget: Number of LUNs=1
[    2.387977]  lun0: LUN: removable file: (no medium)
[    2.392901] adb_bind_config
[    2.396012] mtp_bind_config
[    2.398647] mice: could not register psaux device, error: -16
[    2.404097] mice: PS/2 mouse device common for all mice
[    2.409785] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    2.416285] touchscreen-1wire    initialized
[    2.419959] backlight-1wire    initialized
[    2.423816] setup_irq: ret = 0
[    2.426795] PWM clock = 66700000
[    2.430007] TCNT_FOR_SAMPLE_BIT = 3472
[    2.433729] TCFG1 = 00000003 - 00000003
[    2.437744] input: fa_ts_input as /devices/virtual/input/input1
eric Bluetooth USB driver ver 0.6
[    2.566343] usbcore: registered new interface driver btusb
[    2.571749] cpuidle: using governor ladder
[    2.575835] cpuidle: using governor menu
[    2.579703] sdhci: Secure Digital Host Controller Interface driver
[    2.585820] sdhci: Copyright(c) Pierre Ossman
[    2.590258] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
[    2.596749] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
[    2.603336] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
[    2.610500] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[    2.617154] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
[    2.623699] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
[    2.630285] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
[    2.637395] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[    2.644096] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
[    2.650648] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
[    2.657239] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (476ured
[    2.750551] Netfilter messages via NETLINK v0.30.
[    2.755290] nf_conntrack version 0.5.0 (5366 buckets, 21464 max)
[    2.761356] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    2.768578] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    2.776460] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    2.783188] ctnetlink v0.93: registering with nfnetlink.
[    2.788014] xt_time: kernel timezone is -0000
[    2.794127] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.797613] arp_tables: (C) 2002 David S. Miller
[    2.802175] TCP cubic registered
[    2.805343] NET: Registered protocol family 10
[    2.811396] lo: Disabled Privacy Extensions
[    2.819216] Mobile IPv6
[    2.819244] IPv6 over IPv4 tunneling driver
[    2.821881] sit0: Disabled Privacy Extensions
[    2.827519] ip6tnl0: Disabled Privacy Extensions
[    2.830698] NET: Registered protocol family 17
[    2.833852] NET: Registered protocol family 15
[    2.840435] Bluetooth: L2CAP ver 2.14
[    2.841890] Bluetooth: L2CAP socket layer initialized
[    2.846924] Bluetooth: SCO (Voi5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[    2.943162] s5p-tvout s5p-tvout: hpd status is cable removed
[    2.954104] DBUG_PORT must not use AFC!
[    2.954366] Freeing init memory: 1428K
[    2.982244] yaffs: dev is 32505860 name is "mtdblock4" rw
[    2.982293] yaffs: passed flags ""
[    3.366311] mmc0: new high speed SDHC card at address e624
[    3.374418] mmcblk0: mmc0:e624 SU04G 3.69 GiB
[    3.374689]  mmcblk0:
[    3.391551]  p1
1Wire touchscreen OK
TouchDevice: /dev/touchscreen-1wire
xres = 800, yres = 480
Took 14 samples...
Top left : X = 3358 Y =  358
Took 14 samples...
Top right : X = 3412 Y = 3703
Took 14 samples...
Bot right : X =  603 Y = 3704
Took 12 samples...
Bot left : X =  638 Y =  364
Took 13 samples...
Center : X = 2017 Y = 2033
-26.156982 0.000262 0.209423
514.808899 -0.137418 0.000392
[   22.989891] init: cannot open '/initlogo.rle'
[   23.855676] enabling adb
[   23.863698] Enabled => usb_mass_storage
[   23.863739] Enabled => adb
[   23.890104] adb_open
/ # [   25.908523] PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [478, drivers/gpu/pvr/s5pc110/sysconfig.c]
[   29.604770] s3c_idma_preallocate_buffer:  VA-e0940000  PA-C0000000  163840bytes
[   29.605325] asoc: WM8960 <-> s5pc1xx-i2s mapping ok
[   30.513568] Compat-wireless backport release: compat-wireless-2012-02-28
[   30.513633] Backport based on linux-next.git next-20120228
[   30.596752] cfg80211: Calling CRDA to update world regulatory domain
[   30.654384] libertas_sdio: Libertas SDIO driver
[   30.654431] libertas_sdio: Copyright Pierre Ossman
[   30.924038] usbcore: registered new interface driver ath9k_htc
[   31.033412] usbcore: registered new interface driver rt73usb
[   31.114517] usbcore: registered new interface driver rt2800usb
[   31.173926]
[   31.173933] rtw driver version=v3.0.1590.20110511
[   31.174199] usbcore: registered new interface driver rtl8192cu
[   31.213765] usbcore: registered new interface driver zd1211rw
[   55.621652] request_suspend_state: wakeup (3->0) at 55084750003 (1970-01-02 04:32:05.205507709 UTC)
[   55.624234] init: untracked pid 64 exited
[   55.625089] init: untracked pid 58 exited
[   56.160886] request_suspend_state: wakeup (0->0) at 55623983044 (1970-01-02 04:32:05.744740834 UTC)
[   56.163192] init: untracked pid 127 exited
[   56.163812] init: untracked pid 128 exited
[   61.563798] request_suspend_state: wakeup (0->0) at 61026895836 (1970-01-02 04:32:11.147653375 UTC)
[   61.566173] init: untracked pid 136 exited
[   61.566785] init: untracked pid 137 exited
[   65.964745] request_suspend_state: wakeup (0->0) at 65427843794 (1970-01-02 04:32:15.548601209 UTC)
[   65.967021]

有谁能告诉这应该怎么处理呢 是不是源码有问题呢

你用的是ubuntu，我是无法确定是否会出问题
你可以先检查一下编译生成rootfs的大小，如果相差明显，则一定是出错了
另外，建议你下载最新版本的源代码

还有，把logcat输出的日志也帖出来看看吧

补充一点：我有在fedora 15下编译过，是没有问题的

这都什么解释 友善。。。。

首先，我声明我不代表友善。

然后，我想问一句，难道你觉得我应该为了你问题，我要去装个ubuntu 11.04，然后去帮你验证一下？
还有，logcat一下帖出来有这么难吗？这一点我已经说过2次(1楼和4楼)

这里是交流区域，大家都是有自己的工作的，既然你不尊重别人，那么你的帖我也没必要再回复。

不懂就别说 费这个事

费事？看你的帖子才真的是浪费我的时间和带宽。

问题解决了 是jdk6的原因