我参照了网上很多移植的方法都是移植不成功啊，我的内核直接用的是友善提供的内核，按理说应该支持YAFF2S文件系统啊，可是总出现下面的错误，望有大侠可以帮帮我！！ 谢谢了
TCP: Hash tables configured (established 2048 bind 2048)- (prerenumeration)t
TCP reno registered
NET: Registered protocol family 1driver keyspan_pda
RPC: Registered udp transport module.keyspan_pda: v1.1:USB Keyspan PDA Con
RPC: Registered tcp transport module.s badriverup - versi
USB Serial
RPC: Registered tcp NFSv4.1 backchannel transport module.
block 15 is badupport register
usbcore
NetWinder Floating Point Emulator V0.97 (double precision)
block 17 is badra
kl5kusb105: v0.3a:K
yaffs Jan 8 2010 12:48:07 Installing.erter driverti
msgmni has been set to 116egistered
USB Seri
alg: No test for stdrng (krng) USB smart card terminal
io scheduler noop registered (default)inte
usbcore: registered
Console: switching to colour frame buffer device 30x20
block 23 is badt
kobil_sct: 21/05/2004:KOBIL USB Sma
fb0: s3c2410fb frame bueo C
block 41 is bad7:
s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
block 43 is badily 2iohdo
USB Serial support registered for M
loop: module loaded Serial Driver
S3C24XX NAND Driver, (c) 2004 Simtec Electronics02
mos7840: 1.3.2:Moschip 7840/7820
s3c24xx-nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29nssbcore: registered new interface driver mos7840s badd,
s3c24xx-nand s3c2440-nand: NAND soft ECCport registered for
Bad eraseblock 47 at 0x0000005e0000n
usbcore: registered new interface
Bad eraseblock 48 at 0x000000600000
omninet
Bad eraseblock 49 at 0x000000620000rivere 31:3.d: v2.6
Bad eraseblock 50 at 0x000000640000t registered for opticonredrface d
Bad eraseblock 51 at 0x000000660000re: registered new interface driver
Bad eraseblock 52 at 0x0000006800001a4>] (do_exit+0x0/0
USB Serial sup
Bad eraseblock 53 at 0x0000006a0000t)
r7:00
Bad eraseblock 54 at 0x0000006c0000red new interface driver option
Bad eraseblock 55 at 0x0000006e0000ARM BIO
option: v0.7.2:USB Dri
Bad eraseblock 60 at 0x000000780000
[l] Download WinCE boot-logo
Bad eraseblock 61 at 0x0000007a0000ial adaptor driver
Bad eraseblock 62 at 0x0000007c0000USB Serial support registered for Q
Bad eraseblock 63 at 0x0000007e0000ot linux from RAM
u
Bad eraseblock 64 at 0x000000800000ver qcserial
Boot the s
Bad eraseblock 65 at 0x000000820000al: v0.0b:USB Safe Encapsulated Ser
Bad eraseblock 66 at 0x000000840000ST through USB
USB Serial support r
Bad eraseblock 67 at 0x000000860000
[r] Restore NAND Flash from HOST
Bad eraseblock 68 at 0x000000880000iver safe_serial
[q] Goto shell o
Bad eraseblock 69 at 0x0000008a0000B Serial support registered for
E
Bad eraseblock 78 at 0x0000009c0000
[g] Boot linux f
USB Serial
Bad eraseblock 79 at 0x0000009e0000and flash
Bad eraseblock 80 at 0x000000a00000driver spcp8x5 boot parameters
Bad eraseblock 81 at 0x000000a20000 v0.04:SPCP8x5 USB to serial adapto
Bad eraseblock 82 at 0x000000a40000
[r] Rest
USB Serial
Bad eraseblock 84 at 0x000000a80000
USB Serial s
Creating 5 MTD partitions on "NAND 128MiB 3,3V 8-bit":.........................
0x000000000000-0x000000040000 : "supervivi"3.5
...................................
0x000000040000-0x000000060000 : "param"r Sony Clie 5.0
0x000000060000-0x000000560000 : "Kernel"ed new interface driver visor...........
0x000000560000-0x000040560000 : "root"or: USB HandSpring Visor / P
mtd: partition "nand" extends beyond the end of device "NAND 128MiB 3,3V 8-bit"hiteheat: v2.0:USB ConnectTech WhiteHEAT driver
-- size truncated to 0x8000000se device common for all mice.
dm9000 Ethernet Driver, V1.31............
s3c2410 TouchScr
eth0: dm9000e at c4814300,c4818304 IRQ 51 MAC: 08:90:90:90:90:90 (chip)c2410 TouchScreen as /devices/virtual/input/input0.....................
Atmel at76x USB Wireless LAN Driver 0.17 loadingC, (c) 2004,2006 Simtec Electronics
..........
usbcore: registered new interface driver at76c50x-usbtc: rtc disabled, re-enabling
usbcore: registered new interface driver zd1211rw: rtc core: reg
block
USB Serial
conex: registeredviv
usbcore: registered new interface driver rt73usbdriver etoms
[y] Download root_yaffs ima
usbcore: registered new interface driver rt2800usbre: registered new interface driver finepix Downlo
usbcore: registered new interface driver ar9170usbregisteredinCE boot-logoseblo
usbcore: registered
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driverd] Download & Run
jeilinj: registeredownload zImag
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI driver marsx from RAMA Conv
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1ew interface driver mr97310aSet the boot parameters
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x490000ore: registered new int
usb usb1: Manufacturer: Linux 2.6.32.2-FriendlyARM ohci_hcd
pac7311: registeredSH for Linuxad eras
usbcor
usb usb1: SerialNumber: s3c24xxer sn9c20xonverter d
[k] Downlo
usb usb1: configuration #1 chosen from 1 choicenload root_yaffs i
usbcore: registered new inte
hub 1-0:1.0: USB hub foundication kl
hub 1-0:1.0: 2 ports detectededr WinCE
usbcore:
Initializing USB Mass Storage driver... smart card terminalion t
[w] Download
usbcore: registered new interface driver usb-storage registered new interface driver spca500e into RAM
USB Mass Storage support registered.spca500: registeredock 65 at 0x00000
usbcore: registered new interfr
[v] Download vivi
stk01
USB Serial support registered for genericegistered new interface driver t613eB Ser
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver tv8
usbserial: USB Serial Driver coread WinCE boot-lo
tv8532: register
USB Serial support registered for aircablew interface driver vc032x Download & Run0a
usbcore: registered new interface driver aircable
usbcore: registered new interfa
USB Serial support registered for ark3116flash - omni.net lc
zc3xx: registeredot t
usbcore: registered new interface driver ark3116river ALi m5602
Bad eraseblock
Backup NA
USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapterd new interface driver STV06xxfrom HOST through USBx000000a80000- omni.ne
usbcore: registered new interface driver belkin860: driver startup - version 0.9d10
usbcore: registered new interface driver cp210x
s3c2440 camif init done 128450560c20000....
cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
SCCB address 0x60, manufacture ID 0xFFFF, expect 0x7FA2---
USB Serial support registered for Reiner SCT Cyberjack USB card reader manufacture ID 0xFFFF, expect 0x7FA2
........
Cr
------------
usbcore: registered new interface driver cyberjack--------
S3C2410 Watchdog Timer, (c) 2004 Simtec E
cyberjack: v1.01 Matthias Bruestle
Ba
0x07fc0
s3c2410
cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Dervivi" new int
yaffs: auto selecting yaffs2S23
usbcore: registered new interface driver io_edgeportck 15 is bad
[k] Downloa
block 974 is badux param
io_edgeport: v2.7:Edgeport USB Serial Driverface drive
linux command line is
VFS: Mounte
USB Serial support registered for Edgeport TI 1 port adapter
Bad erasebloc
[a]
Freeing init memory: 180Kre
USB Serial support registered for Edgeport TI 2 port adapternsole.....2nterface driver cyp
Uncompressing
Failed to
usbcore: registered new interface driver io_ti........
U
io_ti: v0.7mode043006:Edgeport
hp4x: v1.00:HP4x (48/49) Generic Serial driver
blo
[z] Download zIm
##### Friend
USB Serial support registered for PocketPC PDAz), fast, MPLL on, UPLL
[x] format NAND FLASH
usbcore: registered new interface driver ipaqownload vivi order, mobility
[k] Download li
ipaq: v0.5:USB PocketPC PDA driver
[y] Download root_yaffs imager um
USB Serial support registered for IPWireless convertert=/dev/mtdblock3 init=/linuxr
[n] Download Nboot for W
usbcore: registered new interface driver ipwttynCE boot-logoregistered
PID hash table en
[w] D
ipw: v0.3:IPWireless tty drivere driver fine
[d] Download & Ru
USB Serial support registered for IR Dongle RAM: 8192 (order: 3, 32768 byte
[g] Boot l
usbcore: registered new interface driver ir-usbthe nand flashhe hash table entries: 40
Boo
ir_usb: v0.4:USB IR Dongle driv[s] Set the boo
DMA chan
Ente
usbcore: registered new interface driver keyspan_pda....................................................
keyspan_pda: v1.1:USB Keyspan PDA Converter driver
bio: create slab <b
..
USB Serial support registered for KL5KUSB105D / PalmConnect..................gisteredBoo
usbcore: registered new inter
usbcore: registered new interface driver kl5kusb105d....................................................
kl5kusb105: v0.3a:KLSI KL5KUSB105 chipset USB->Serial Converter driver device driver usb
.............................................
USB Serial support registered for KOBIL
....................................
USB Serial support registered for moto-modemision)ered new interface
usbcore: registered new interface driver moto-modem................................................gmn
USB Serial support registered for navmanis bad
alg: No test
##### FriendlyARM
usbcore: registered new interface driver navmangistered (defaul
[x] format NAND FLASH for Linu
USB Serial support registered for ZyXEL - omni.net lcd plus usb4
[k] Download linux kernelir_usb: v0.4:USB IR Dongl
[y] Down
usbcore: registered new interface driver omninet
[a] Absolute User Applicationtialized
b
US
omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
buttons ini
[l] Download WinCE boot-log
USB Serial support registered for opticon WinCE NK.binzed
[d
usbcore: registered new int
Creating
usbcore: registered new interface driver siemens_mpi....................................................
Driver for Siemens USB/MPI adapterivi"Do
mos7840: 1.3.2:Moschi
Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net...............................0000-0x000000560000 : "Kernel"
USB Serial support registered for Sierra USB modem..................................................
usbcore: registered new interface driver sierraend of device "NAND 128MiB 3,3V 8-bit"
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems............................ed to 0x7aa0000hc2440-nand: T
USB Serial support registered for SPCP8x50000 : "n
......................................
USB Serial support registered for symbol.r, V1.31 nand flashs 0000000
e
usbcore: registered new interface driver symbol...............................................
USB Serial support registered for TI USB 3410 1 port adapterB Wireless LAN Driver 0.17 loading
.............
USB Serial support registered for TI USB 5052 2 port adapterer at76c50x-usb ZyXEL - omni.net lcd plus usbon: 0945-
####
usbcore: registered new interface driver ti_usb_3410_5052
[x] format NAND FLASH for Linuxbcore
ti_usb_3410_5052: v0.9:TI USB 3410/5052 Serial Driver.......
[k] Download linux kernel
usbcore: register
USB Serial support registered for Handspring Visor / Palm OScse
[a] Absolute User Applicationred new interface driver rt
USB Serial support registered fo
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0us
Written 2517028 byteshosen from 1 choice
##### Frie
i2c /dev entries driver0 #####
hub 1-0:1.0:
Linux video capture interface: v2.00NAND FLASH for Linuxrts detected: re
gspca: main v2.7.0 registerediviizing USB Mass St
[k] Down
usbcore: registered new interface driver conexDownload root_yaffs imageterface driver usb-st
conex: registeredute User Applicat
usbcore: registered new interface driver etomsboot for WinCEot-logovm
[l]
etoms: registeredot-logow interfac
usbcore: registered new interface driver finepix
[d] Download & Runed new in
finepix: registeredad zImage into RAM
usbcore: registered new interface driver jeilinjAMgistered new interface
[f] Format the nand fl
jeilinj: registered
Boot t
Now, Downloading [ADDR
ov534: registeredL:6367162]a610: s
usbcore: registered new interface driver pac207loaded file at 0x30000000, size = 6367152 bytes
pac207: registered: registered new i
usbcore: registered new interface driver pac7311ck = 2048, erasesize = 131072, partition sizered
pac7311: registeredr ums-usbat
usbcore: registered new interface driver sn9c20xe: register
Erasing and programming NAND with ya
sn9c20x: registeredto RAM.......
usbcore: registered new interface driver sonixblock bad(ad
eth0: d
##### F
usbcore: registered new interface driver spca506r410-rtc: rtc core: regist
[x] format NAND FLASH
spca506: registered
usbcore
usbcore: registered new interface driver spca508d linux kernel] Goto shell of vivisdi:
[y] Down
spca508: registeredeial converter driv
usbcore: registered new interface driver spca561
USB Serial suppor
[n] Download Nboot for Win
spca561: registered..........
[l] Down
usbcore: registered new interface driver stk014tore NAND Flash from HOST through USB
stk014: registered
[q
usbcore: registered new interface driver t613 Version: 0945-2K
usbcore: regist
Enter y
t613: registeredyberjack: v1.01
usbcore: registered new interface driver tv8532008000, size = 0x00500000 ... donek pinpad/e-co
tv8532: registereder Driver
usbcore: registered new interface driver vc032x818
USB Serial su
Setup linux parame
vc032x: registered USBface driver ov
usbcore: registered new interface driver zc3xxtrd root=/dev/mtdistered for
gspca_gl860: driver registeredARM (root@tom) (gcc version 4.
usbcore: registered new interface driver uvcvideo
usbcor
digi_acceleport: v1.80
USB Video Class driver (v0.1.0)2:53:23 CST 2010r driver
initializing s3c2440 camera interface......T [41129200] revision 0 (ARMv4T), cr=c00071
s3c2440 camif init doneort 2 port adaptern)S
Loading OV9650 driver.........e, VIVT instruction cache Seri
SCCB address 0x60, manufacture ID 0xFFFF, expect riendlyARM Mini2440
S3C244X: core 405.000 MHz, memory 1
s3c-sdi s3c2440-sdi: powered down.d for Edgeport TI 1 port adapter5h
s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ1.500 MHz), fast, MPLL on, UPLL onred for Edgeport
usbcore: registered new interface driver usbhidelists in Zone order, mobility grouping on. To
usbhid: v2.6:USB HID core driveristered new interface driver usb
Advanced Linux Sound Architecture Driver Version 1.0.21.oot=/dev/mtdblock3 init=/linuxrc console=ttySAC0
USB
No device for DAI UDA134Xfor empegce driver vc032x
No device for DAI s3c24xx-i2stable entries: 256 (order: -2
S3C24XX_UDA134X SoC Audio driver
0439)5602:
yaffs: dev is 32505859 name is "mtdblock3"al s
Hierarchical RCU implementation.usb/t
yaffs: passed flags "" dri
NR_IRQS:85gi
yaffs: Attempting MTD mount on 31.3, "mtdblock3"r garmin_gps VIVT data cache, VIVT
irq: clearin
yaffs: auto selecting yaffs20.33:garmin gps driverteredo
block 3 is badsole: colour d
block 4 is bad30rt registere
block 5 is badver sta
consol
block 6 is badbled
usbcore:
block 7 is bad
Calibrating d
block 8 is bad1.93 Bogo
block 9 is bad
block 17 is badialising archit
block 18 is bady: ECC disabl
i
block 19 is bad0: IRQ Supportv
block 20 is bad
S3C24XX DMA
block 21 is bad3-2004,2006 Sim
block 22 is badess converter
block 23 is bad Linux Sound Ar
block 24 is badhannel 0 at c48
block 25 is badnterface driver
block 26 is badDMA channel 1 a
block 27 is bad34
ipw: v0
block 28 is bady dr
DMA channe
block 29 is bad irq 35
USB Se
block 30 is badistered f
DMA c
block 31 is bad80c0, irq 3632,
block 32 is bad
usbcore: re
block 33 is badupport, DVS off
block 34 is bad-i2s, Nodes=1cy
block 45 is bad
block 46 is bad
block 47 is bad
block 48 is bad
block 49 is bad
block 974 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:3.
Freeing init memory: 160K
Warning: unable to open an initial console.
Failed to execute /linuxrc. Attempting defaults...
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
Backtrace:
[<c0035270>] (dump_backtrace+0x0/0x10c) from [<c03958f0>] (dump_stack+0x18/0x1c)
r7:00000000 r6:c0503ed0 r5:c0503660 r4:c04c61a0
[<c03958d8>] (dump_stack+0x0/0x1c) from [<c0395940>] (panic+0x4c/0x134)
[<c03958f4>] (panic+0x0/0x134) from [<c00305a4>] (init_post+0xec/0x178)
r3:00000000 r2:c3936200 r1:c0539000 r0:c045348c
[<c00304b8>] (init_post+0x0/0x178) from [<c00084c4>] (kernel_init+0xf4/0x124)
r5:c00205d4 r4:c00205d4
[<c00083d0>] (kernel_init+0x0/0x124) from [<c004d1a4>] (do_exit+0x0/0x62c)
r7:00000000 r6:00000000 r5:00000000 r4:00000000
