平台：tiny210
系统:fedora18
主机：win7
按光盘上的说法，设置好了所需的东西与软件。之后加载kernel、superboot210.bi、commandline到SD卡，烧写到nand里启动，SD卡的FriendlyARM.ini设置如下：
#This line cannot be removed. by FriendlyARM(
www.arm9.net)
CheckOneButton=No
Action = Install
OS = Linux
LCD-Mode = No
LCD-Type = S70
LowFormat = No
VerifyNandWrite = No
CheckCRC32=No
StatusType = Beeper | LED
################### Linux ####################
Linux-BootLoader = Superboot210.bin
Linux-Kernel = Linux/zImage
Linux-CommandLine = console=ttySAC0 root=/dev/nfs
nfsroot=192.168.1.107://opt/FriendlyARM/mini210/linux/rootfs_qtopia_qt4
ip=192.168.1.123:192.168.1.107:192.168.1.107:255.255.255.0:linux.arm9.net:eth0:off
Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4-mlc2.img
即fedora18的ip是192.168.1.107 板子ip为192.168.1.123
板子烧写完成后，一直重启！！接上串口，信息如下：
Load Kernel...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.8-FriendlyARM (
root@localhost.localdomain) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #2 PREEMPT Tue Jul 2 04:11:01 PDT 2013
[ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: MINI210
[ 0.000000] MINI210: S70 selected
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
[ 0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
[ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
[ 0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[ 0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_g3d: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] s5p: 36864 kbytes system memory reserved for mfc at 0x2dc00000, 0-bank base(0x2dc00000)
[ 0.000000] s5p: 36864 kbytes system memory reserved for mfc at 0x3dbf6000, 1-bank base(0x3dbf6000)
[ 0.000000] s5p: 6144 kbytes system memory reserved for fimc0 at 0x3d5f6000, 1-bank base(0x3d5f6000)
[ 0.000000] s5p: 16 kbytes system memory reserved for fimc1 at 0x3d5f2000, 1-bank base(0x3d5f2000)
[ 0.000000] s5p: 6144 kbytes system memory reserved for fimc2 at 0x3cff2000, 1-bank base(0x3cff2000)
[ 0.000000] s5p: 8192 kbytes system memory reserved for jpeg at 0x2d400000, 0-bank base(0x2d400000)
[ 0.000000] s5p: 13060 kbytes system memory reserved for fimd at 0x3c331000, 1-bank base(0x3c331000)
[ 0.000000] s5p: 8192 kbytes system memory reserved for g2d at 0x2cc00000, 0-bank base(0x2cc00000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 101179
[ 0.000000] Kernel command line: console=ttySAC0 root=/dev/nfs lcd=S70
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 204MB 195MB 0MB = 399MB total
[ 0.000000] Memory: 394728k/510204k available, 14084k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfd000000 ( 456 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0173000 (1452 kB)
[ 0.000000] .text : 0xc0173000 - 0xc08ab2d8 (7393 kB)
[ 0.000000] .data : 0xc08ac000 - 0xc0903740 ( 350 kB)
[ 0.000000] .bss : 0xc0903764 - 0xc0947aa8 ( 273 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:393
[ 0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
[ 0.000000] sched_clock: 32 bits at 33MHz, resolution 29ns, wraps every 128784ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttySAC0] enabled
[ 0.429016] Calibrating delay loop... 997.78 BogoMIPS (lpj=2494464)
[ 0.459997] pid_max: default: 32768 minimum: 301
[ 0.460157] Mount-cache hash table entries: 512
[ 0.460490] Initializing cgroup subsys debug
[ 0.460531] Initializing cgroup subsys cpuacct
[ 0.460577] Initializing cgroup subsys freezer
[ 0.462591] CPU: Testing write buffer coherency: ok
[ 0.470150] print_constraints: dummy:
[ 0.471273] NET: Registered protocol family 16
[ 0.480714] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.487307] fimd at 0x3c331000
[ 0.487387] hsmmc0: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.491128] hsmmc1: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.497421] hsmmc2: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.503589] hsmmc3: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.510648] S5PV210: Initializing architecture
[ 0.514865] s3c-adc s5pv210-adc: attached adc driver
[ 0.519342] s3c24xx-pwm s3c24xx-pwm.0: tin at 33350000, tdiv at 33350000, tin=divclk, base 0
[ 0.527969] print_constraints: pd_tv_supply: 5000 mV normal
[ 0.533370] print_constraints: pd_lcd_supply: 5000 mV normal
[ 0.539095] print_constraints: pd_g3d_supply: 5000 mV normal
[ 0.544796] print_constraints: pd_mfc_supply: 5000 mV normal
[ 0.550523] print_constraints: pd_audio_supply: 5000 mV normal
[ 0.587123] bio: create slab <bio-0> at 0
[ 0.588080] SCSI subsystem initialized
[ 0.589882] usbcore: registered new interface driver usbfs
[ 0.590207] usbcore: registered new interface driver hub
[ 0.590402] usbcore: registered new device driver usb
[ 0.590954] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.593380] s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz
[ 0.600111] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.604677] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 0.609716] s3c-i2c s3c2440-i2c.1: bus frequency set to 65 KHz
[ 0.615744] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.620911] s3c-i2c s3c2440-i2c.2: slave address 0x10
[ 0.625894] s3c-i2c s3c2440-i2c.2: bus frequency set to 378 KHz
[ 0.632145] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.637698] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.644017] Bluetooth: Core ver 2.16
[ 0.647165] NET: Registered protocol family 31
[ 0.651479] Bluetooth: HCI device and connection manager initialized
[ 0.657786] Bluetooth: HCI socket layer initialized
[ 0.662628] Bluetooth: L2CAP socket layer initialized
[ 0.667652] Bluetooth: SCO socket layer initialized
[ 0.672738] Switching to clocksource s5p_clocksource_timer
[ 0.679994] Switched to NOHz mode on CPU #0
[ 0.691431] NET: Registered protocol family 2
[ 0.691622] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.694327] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.700855] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.707467] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.713675] TCP reno registered
[ 0.716780] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.722697] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.729216] NET: Registered protocol family 1
[ 0.733578] RPC: Registered named UNIX socket transport module.
[ 0.739273] RPC: Registered udp transport module.
[ 0.743911] RPC: Registered tcp transport module.
[ 0.748590] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.764805] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.764941] PMU: registered new PMU device of type 0
[ 0.766741] cpuidle: phy_regs_save:0x3bf3c000
[ 0.770971] Loaded driver for PL330 DMAC-0 s3c-pl330
[ 0.775755] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
[ 0.781851] Loaded driver for PL330 DMAC-1 s3c-pl330
[ 0.786726] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.792875] Loaded driver for PL330 DMAC-2 s3c-pl330
[ 0.797729] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.811908] ashmem: initialized
[ 0.825769] NTFS driver 2.1.30 [Flags: R/W].
[ 0.826271] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.826531] msgmni has been set to 770
[ 0.827503] io scheduler noop registered
[ 0.827540] io scheduler deadline registered
[ 0.827624] io scheduler cfq registered (default)
[ 0.832008] start plist test
[ 0.840051] end plist test
[ 0.840817] s3cfb s3cfb: win 2: pmem_start=0x3c796000
[ 0.842518] s3cfb s3cfb: [fb2] dma: 0x3c796000, cpu: 0xe1000000, size: 0x0085c000
[ 0.861522] Console: switching to colour frame buffer device 100x30
[ 0.866584] FIMD src sclk = 166750000
[ 0.866655] s3cfb s3cfb: registered successfully
[ 0.866695] Start display and show logo
[ 0.873627] s5pv210-uart.0: ttySAC0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
[ 0.878261] s5pv210-uart.1: ttySAC1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
[ 0.893034] s5pv210-uart.2: ttySAC2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
[ 0.903033] s5pv210-uart.3: ttySAC3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
[ 0.913492] leds initialized
[ 0.913660] buttons initialized
[ 0.913843] pwm initialized
[ 0.914031] mini210-adc initialized
[ 0.914320] backlight initialized
[ 0.915147] PA FB = 0x3C796000, bits per pixel = 32
[ 0.918472] screen width=800 height=480 va=0xdc796000 pa=0x3c796000
[ 0.924734] xres_virtual = 800, yres_virtual = 1440, xoffset = 0, yoffset = 0
[ 0.931785] fb_size=8765440
[ 0.934569] Back frameBuffer[0].VAddr=dc90d000 PAddr=3c90d000 size=1536000
[ 0.941406] Back frameBuffer[1].VAddr=dca84000 PAddr=3ca84000 size=1536000
[ 0.948257] Video Y Buffer[0].VAddr=dcbfb000 PAddr=3cbfb000 size=921600
[ 0.954836] Video Y Buffer[1].VAddr=dccdc000 PAddr=3ccdc000 size=921600
[ 0.961421] Video Y Buffer[2].VAddr=dcdbd000 PAddr=3cdbd000 size=921600
[ 0.968007] Video UV Buffer[0].VAddr=dce9e000 PAddr=3ce9e000 size=462848
[ 0.974681] Video UV Buffer[1].VAddr=dcf0f000 PAddr=3cf0f000 size=462848
[ 0.981351] Video UV Buffer[2].VAddr=dcf80000 PAddr=3cf80000 size=462848
[ 0.994369] brd: module loaded
[ 0.997574] loop: module loaded
[ 0.998995] S3C NAND Driver, (c) 2008 Samsung Electronics
[ 1.130769] MLC nand initialized, 2012 ported by FriendlyARM
[ 1.130820] S3C NAND Driver is using hardware ECC.
[ 1.130895] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)
[ 1.130973] Creating 5 MTD partitions on "s5pv210-nand":
[ 1.132604] 0x0000000c0000-0x000000100000 : "misc"
[ 1.138536] 0x000000100000-0x000000600000 : "recovery"
[ 1.144178] 0x000000600000-0x000000b00000 : "kernel"
[ 1.149122] 0x000000b00000-0x000000e00000 : "ramdisk"
[ 1.153761] 0x000000e00000-0x000080000000 : "system"
[ 1.495691] PPP generic driver version 2.4.2
[ 1.496017] PPP Deflate Compression module registered
[ 1.496062] PPP BSD Compression module registered
[ 1.496526] PPP MPPE Compression module registered
[ 1.496569] NET: Registered protocol family 24
[ 1.498017] tun: Universal TUN/TAP device driver, 1.6
[ 1.501590] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 1.508058] dm9000 Ethernet Driver, V1.31
[ 1.512925] eth0: dm9000a at e0838000,e083c00c IRQ 39 MAC: 08:90:00:a0:02:10 (platform data)
[ 1.520383] sdhci: Secure Digital Host Controller Interface driver
[ 1.526332] sdhci: Copyright(c) Pierre Ossman
[ 1.530699] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
[ 1.537240] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
[ 1.544034] mmc0: no vmmc regulator found
[ 1.548262] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[ 1.555053] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
[ 1.561586] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
[ 1.570382] mmc1: no vmmc regulator found
[ 1.572638] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[ 1.579393] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
[ 1.589016] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
[ 1.592699] mmc2: no vmmc regulator found
[ 1.597029] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[ 1.603744] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
[ 1.612297] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
[ 1.617064] mmc3: no vmmc regulator found
[ 1.621306] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[ 1.631277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.634761] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 1.639799] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.648871] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
[ 1.658008] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 1.658621] hub 1-0:1.0: USB hub found
[ 1.661138] hub 1-0:1.0: 1 port detected
[ 1.668589] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.671274] s5p-ohci s5p-ohci: EXYNOS OHCI Host Controller
[ 1.676704] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
[ 1.685717] s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
[ 1.749574] hub 2-0:1.0: USB hub found
[ 1.749620] hub 2-0:1.0: 1 port detected
[ 1.750362] usbcore: registered new interface driver usbserial
[ 1.750537] USB Serial support registered for generic
[ 1.750723] usbcore: registered new interface driver usbserial_generic
[ 1.752270] usbserial: USB Serial Driver core
[ 1.756746] USB Serial support registered for aircable
[ 1.761907] usbcore: registered new interface driver aircable
[ 1.770762] USB Serial support registered for ark3116
[ 1.772599] usbcore: registered new interface driver ark3116
[ 1.778133] ark3116:v0.6:USB ARK3116 serial/IrDA driver
[ 1.785424] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 1.791678] usbcore: registered new interface driver belkin
[ 1.797112] belkin_sa: v1.3:USB Belkin Serial converter driver
[ 1.806129] USB Serial support registered for ch341-uart
[ 1.808315] usbcore: registered new interface driver ch341
[ 1.813760] USB Serial support registered for cp210x
[ 1.820740] usbcore: registered new interface driver cp210x
[ 1.824148] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[ 1.830988] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 1.841682] usbcore: registered new interface driver cyberjack
[ 1.844231] cyberjack: v1.01 Matthias Bruestle
[ 1.848697] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[ 1.858419] USB Serial support registered for DeLorme Earthmate USB
[ 1.862617] USB Serial support registered for HID->COM RS232 Adapter
[ 1.868940] USB Serial support registered for Nokia CA-42 V2 Adapter
[ 1.875321] usbcore: registered new interface driver cypress
[ 1.880833] cypress_m8: v1.10:Cypress USB to Serial Driver
[ 1.887380] USB Serial support registered for Digi 2 port USB adapter
[ 1.894818] USB Serial support registered for Digi 4 port USB adapter
[ 1.899241] usbcore: registered new interface driver digi_acceleport
[ 1.905440] digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
[ 1.913749] USB Serial support registered for Edgeport 2 port adapter
[ 1.920181] USB Serial support registered for Edgeport 4 port adapter
[ 1.926598] USB Serial support registered for Edgeport 8 port adapter
[ 1.933034] USB Serial support registered for EPiC device
[ 1.938411] usbcore: registered new interface driver io_edgeport
[ 1.944265] io_edgeport: v2.7:Edgeport USB Serial Driver
[ 1.949636] USB Serial support registered for Edgeport TI 1 port adapter
[ 1.956329] USB Serial support registered for Edgeport TI 2 port adapter
[ 1.963035] usbcore: registered new interface driver io_ti
[ 1.970350] io_ti: v0.7mode043006:Edgeport USB Serial Driver
[ 1.974066] USB Serial support registered for empeg
[ 1.978950] usbcore: registered new interface driver empeg
[ 1.984294] empeg: v1.3:USB Empeg Mark I/II Driver
[ 1.989153] USB Serial support registered for FTDI USB Serial Device
[ 1.996584] usbcore: registered new interface driver ftdi_sio
[ 2.003131] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 2.006993] USB Serial support registered for funsoft
[ 2.012063] usbcore: registered new interface driver funsoft
[ 2.017673] USB Serial support registered for Garmin GPS usb/tty
[ 2.023675] usbcore: registered new interface driver garmin_gps
[ 2.029453] garmin_gps: v0.36:garmin gps driver
[ 2.034036] USB Serial support registered for hp4X
[ 2.038837] usbcore: registered new interface driver hp4X
[ 2.044094] hp4x: v1.00:HP4x (48/49) Generic Serial driver
[ 2.049635] USB Serial support registered for PocketPC PDA
[ 2.055203] usbcore: registered new interface driver ipaq
[ 2.060376] ipaq: v1.0:USB PocketPC PDA driver
[ 2.064870] USB Serial support registered for IPWireless converter
[ 2.073084] usbcore: registered new interface driver ipwtty
[ 2.076456] ipw: v0.4:IPWireless tty driver
[ 2.080746] USB Serial support registered for IR Dongle
[ 2.085982] usbcore: registered new interface driver ir-usb
[ 2.091416] ir_usb: v0.5:USB IR Dongle driver
[ 2.096825] USB Serial support registered for iuu_phoenix
[ 2.103249] usbcore: registered new interface driver iuu_phoenix
[ 2.107078] iuu_phoenix: v0.12:Infinity USB Unlimited Phoenix driver
[ 2.113501] USB Serial support registered for Keyspan PDA
[ 2.118892] USB Serial support registered for Keyspan PDA - (prerenumeration)
[ 2.125995] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[ 2.133996] usbcore: registered new interface driver keyspan_pda
[ 2.139853] keyspan_pda: v1.1:USB Keyspan PDA Converter driver
[ 2.145738] USB Serial support registered for KL5KUSB105D / PalmConnect
[ 2.152358] usbcore: registered new interface driver kl5kusb105d
[ 2.158222] kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
[ 2.165762] USB Serial support registered for KOBIL USB smart card terminal
[ 2.172707] usbcore: registered new interface driver kobil
[ 2.180060] kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
[ 2.185929] USB Serial support registered for MCT U232
[ 2.191079] usbcore: registered new interface driver mct_u232
[ 2.196693] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
[ 2.203974] USB Serial support registered for Moschip 2 port adapter
[ 2.211221] mos7720: 2.1:Moschip USB Serial Driver
[ 2.217081] usbcore: registered new interface driver moschip7720
[ 2.221062] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 2.228416] mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
[ 2.234329] usbcore: registered new interface driver mos7840
[ 2.239949] USB Serial support registered for moto-modem
[ 2.245257] usbcore: registered new interface driver moto-modem
[ 2.251133] USB Serial support registered for navman
[ 2.256107] usbcore: registered new interface driver navman
[ 2.261617] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 2.268572] usbcore: registered new interface driver omninet
[ 2.274095] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[ 2.279780] USB Serial support registered for opticon
[ 2.284846] usbcore: registered new interface driver opticon
[ 2.292462] USB Serial support registered for GSM modem (1-port)
[ 2.296526] usbcore: registered new interface driver option
[ 2.301891] option: v0.7.2:USB Driver for GSM modems
[ 2.306918] USB Serial support registered for oti6858
[ 2.311979] usbcore: registered new interface driver oti6858
[ 2.318631] USB Serial support registered for pl2303
[ 2.324566] usbcore: registered new interface driver pl2303
[ 2.327964] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 2.334043] USB Serial support registered for qcaux
[ 2.338925] usbcore: registered new interface driver qcaux
[ 2.344367] USB Serial support registered for Qualcomm USB modem
[ 2.350386] usbcore: registered new interface driver qcserial
[ 2.355977] safe_serial: v0.1:USB Safe Encapsulated Serial
[ 2.361516] USB Serial support registered for safe_serial
[ 2.366924] usbcore: registered new interface driver safe_serial
[ 2.372882] USB Serial support registered for siemens_mpi
[ 2.378272] usbcore: registered new interface driver siemens_mpi
[ 2.384122] Driver for Siemens USB/MPI adapter
[ 2.388524] Version 0.1 09/26/2005 Thomas
Hergenhahn@web.de http://libnodave.sf.net[ 2.398265] USB Serial support registered for Sierra USB modem
[ 2.402082] usbcore: registered new interface driver sierra
[ 2.407501] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[ 2.414112] USB Serial support registered for SPCP8x5
[ 2.419176] usbcore: registered new interface driver spcp8x5
[ 2.425693] spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver
[ 2.432670] USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[ 2.438244] usbcore: registered new interface driver ssu100
[ 2.443669] ssu100: v0.1:Quatech SSU-100 USB to Serial Driver
[ 2.449470] USB Serial support registered for symbol
[ 2.454467] usbcore: registered new interface driver symbol
[ 2.459990] USB Serial support registered for TI USB 3410 1 port adapter
[ 2.466648] USB Serial support registered for TI USB 5052 2 port adapter
[ 2.473345] usbcore: registered new interface driver ti_usb_3410_5052
[ 2.479636] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[ 2.485870] USB Serial support registered for Handspring Visor / Palm OS
[ 2.492559] USB Serial support registered for Sony Clie 3.5
[ 2.498106] USB Serial support registered for Sony Clie 5.0
[ 2.505659] usbcore: registered new interface driver visor
[ 2.508994] visor: USB HandSpring Visor / Palm OS driver
[ 2.514364] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 2.522620] USB Serial support registered for Connect Tech - WhiteHEAT
[ 2.529148] usbcore: registered new interface driver whiteheat
[ 2.535835] whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
[ 2.542553] USB Serial support registered for vivopay-serial
[ 2.546218] usbcore: registered new interface driver vivopay-serial
[ 2.552338] vivopay_serial: v1.0:ViVOpay USB Serial Driver
[ 2.557873] USB Serial support registered for zio
[ 2.562583] usbcore: registered new interface driver zio
[ 2.567764] Initializing USB Mass Storage driver...
[ 2.572759] usbcore: registered new interface driver usb-storage
[ 2.578597] USB Mass Storage support registered.
[ 2.583339] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
[ 2.583346] s3c-udc : version 15 March 2009 (DMA Mode)
[ 2.599043] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.603567] android_usb gadget: Number of LUNs=1
[ 2.610154] lun0: LUN: removable file: (no medium)
[ 2.613270] android_usb gadget: android_usb ready
[ 2.634333] Registered gadget driver 'android_usb'
[ 2.634665] mousedev: PS/2 mouse device common for all mice
[ 2.635190] touchscreen-1wire initialized
[ 2.635227] backlight-1wire initialized
[ 2.635798] setup_irq: ret = 0
[ 2.638820] PWM clock = 66700000
[ 2.642002] TCNT_FOR_SAMPLE_BIT = 3472, TCFG1 = 00000003
[ 2.647673] input: fa_ts_input as /devices/virtual/input/input0
[ 2.653731] ts-if initialized
[ 2.656398] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
[ 2.661624] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.666951] 3: TCNTB=00000d90, TCNTO=00000750, TINT_CSTAT=0000000c
[ 2.673134] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.678590] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.684017] 4: TCNTB=00000d90, TCNTO=000008b8, TINT_CSTAT=0000000c
[ 2.690184] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.695635] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 2.701468] using rtc device, s3c, for alarms
[ 2.705299] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 2.711615] i2c /dev entries driver
[ 2.715593] Linux video capture interface: v2.00
[ 2.719670] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
[ 2.719676]
[ 2.730696] S3C JPEG Driver, (c) 2007 Samsung Electronics
[ 2.733190] JPEG driver for S5PV210
[ 2.737142] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[ 2.743197] S5PC11X HPD Driver, (c) 2010 Samsung Electronics
[ 2.749041] S5PC11X CEC Driver, (c) 2010 Samsung Electronics
[ 2.755264] usbcore: registered new interface driver uvcvideo
[ 2.760063] USB Video Class driver (v1.1.0)
[ 2.806614] input: mma7660 as /devices/platform/s3c2440-i2c.0/i2c-0/0-004c/input/input1
[ 2.806901] mma7660 0-004c: MMA7660 device is probed successfully.
[ 2.807073] i2c-core: driver [mma7660] using legacy suspend method
[ 2.807126] i2c-core: driver [mma7660] using legacy resume method
[ 2.810740] MMA7660 sensor driver registered.
[ 2.815059] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[ 2.821171] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
[ 2.829544] device-mapper: uevent: version 1.0.3
[ 2.833578] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:
dm-devel@redhat.com[ 2.841629] Bluetooth: HCI UART driver ver 2.2
[ 2.845995] Bluetooth: HCI H4 protocol initialized
[ 2.850760] Bluetooth: HCILL protocol initialized
[ 2.855583] cpuidle: using governor ladder
[ 2.859730] cpuidle: using governor menu
[ 2.870206] usbcore: registered new interface driver usbhid
[ 2.870256] usbhid: USB HID core driver
[ 2.874250] ALSA device list:
[ 2.875687] No soundcards found.
[ 2.879114] oprofile: hardware counters not available
[ 2.884128] oprofile: using timer interrupt.
[ 2.888467] GACT probability NOT on
[ 2.891816] Mirror/redirect action on
[ 2.895471] u32 classifier
[ 2.898152] Actions configured
[ 2.901516] Netfilter messages via NETLINK v0.30.
[ 2.906260] nf_conntrack version 0.5.0 (6167 buckets, 24668 max)
[ 2.913079] ctnetlink v0.93: registering with nfnetlink.
[ 2.917505] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.924435] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.930561] xt_time: kernel timezone is -0000
[ 2.936128] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.939986] arp_tables: (C) 2002 David S. Miller
[ 2.944480] TCP cubic registered
[ 2.948578] NET: Registered protocol family 10
[ 2.956743] Mobile IPv6
[ 2.956794] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.960100] IPv6 over IPv4 tunneling driver
[ 2.968363] NET: Registered protocol family 17
[ 2.968438] NET: Registered protocol family 15
[ 2.972957] Bluetooth: RFCOMM TTY layer initialized
[ 2.977717] Bluetooth: RFCOMM socket layer initialized
[ 2.982816] Bluetooth: RFCOMM ver 1.11
[ 2.986542] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.991825] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.997916] NET: Registered protocol family 35
[ 3.002282] Registering the dns_resolver key type
[ 3.006846] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[ 3.014442] ThumbEE CPU extension supported.
[ 3.018851] s5pv210_cpufreq_init: S5PV210 cpu-freq driver
[ 3.024659] regulator_init_complete: pd_mfc_supply: disabling
[ 3.029817] regulator_init_complete: pd_tv_supply: disabling
[ 3.035477] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 3.040898] s3c-rtc s3c64xx-rtc: setting system clock to 2013-07-02 22:57:21 UTC (1372805841)
[ 3.050799] FIMC0 registered successfully
[ 3.054697] FIMC1 registered successfully
[ 3.058612] FIMC2 registered successfully
[ 3.061424] S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[ 3.067642] s5p-tvout s5p-tvout: hpd status is cable removed
[ 3.079308] Freeing init memory: 1452K
mount: mounting /dev/nfs on /r failed: No such file or directory
1Wire touchscreen OK
/init: line 109: can't open /r/dev/console: no such file
[ 3.113065] Kernel panic - not syncing: Attempted to kill init![ 3.113158] [<c0183fe4>] (unwind_backtrace+0x0/0xf0) from [<c0668b00>] (panic+0x70/0x1ac)
[ 3.113242] [<c0668b00>] (panic+0x70/0x1ac) from [<c01a0548>] (do_exit+0x5dc/0x68c)
[ 3.113314] [<c01a0548>] (do_exit+0x5dc/0x68c) from [<c01a0854>] (do_group_exit+0x3c/0xbc)
[ 3.120743] [<c01a0854>] (do_group_exit+0x3c/0xbc) from [<c01a08e4>] (sys_exit_group+0x10/0x18)
[ 3.129407] [<c01a08e4>] (sys_exit_group+0x10/0x18) from [<c017e640>] (ret_fast_syscall+0x0/0x30)
[ 3.138235] Rebooting in 5 seconds..
请问是怎么回事？？
