<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
<channel>
 <title><![CDATA[请问版主有关于2440的 uboot 的源码啊！！ ..]]></title>
 <link><![CDATA[http://121.40.142.80/read.php?tid=1234]]></link>
 <description><![CDATA[Latest 20 replies of 请问版主有关于2440的 uboot 的源码啊！！ ..]]></description>
 <copyright><![CDATA[Copyright(C) ]]></copyright>
 <generator><![CDATA[PHPWind Forums by PHPWind Studio]]></generator>
 <lastBuildDate><![CDATA[Sun, 26 Jul 2026 05:03:50 +0000]]></lastBuildDate>
  <image>
 <url><![CDATA[images/rss.gif]]></url>
 <title><![CDATA[PHPWind Board]]></title>
 <link><![CDATA[http://121.40.142.80]]></link>
 <description><![CDATA[]]></description>
  </image>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[按键是为了让bootload中止自动启动内核并进入交互模式.你还是把操作步骤和串口终端输出的信息贴出来,否则至少我没法理解你在说什么:)]]></description>
 <link><![CDATA[http://121.40.142.80/read.php?tid=1234#3459]]></link>
 <author><![CDATA[kasim]]></author>
 <category><![CDATA[U-boot技术交流区]]></category>
 <pubdate><![CDATA[Tue, 17 Mar 2009 10:20:44 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[1) 本站用户hugerat移植的u-boot 2008.10 ([url]http://www.arm9home.com/bbs/read.php?tid=1090[/url])
我想知道有谁检验过它的u-boot.bin没，我烧写进去没啥反应？？？???再弱弱的问句：当烧入Nor Flash 并从中时，将会出现菜单模式；当烧入Nand Flash 并从中运行时，则为命令交互模式（提示：需要在超级终端界面下按住 ..]]></description>
 <link><![CDATA[http://121.40.142.80/read.php?tid=1234#3454]]></link>
 <author><![CDATA[jiangchuan_s]]></author>
 <category><![CDATA[U-boot技术交流区]]></category>
 <pubdate><![CDATA[Tue, 17 Mar 2009 01:41:38 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[谢谢了！]]></description>
 <link><![CDATA[http://121.40.142.80/read.php?tid=1234#3335]]></link>
 <author><![CDATA[miss_fish]]></author>
 <category><![CDATA[U-boot技术交流区]]></category>
 <pubdate><![CDATA[Sun, 08 Mar 2009 07:34:33 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[u-boot-1.1.6-FA24x0.tar.gz中所用的配置文件是include\configs\open24x0.h或include\configs\open24x0_legacy.h. 板级的修改在board\open24x0目录下. 用make open24x0_config来配置]]></description>
 <link><![CDATA[http://121.40.142.80/read.php?tid=1234#3328]]></link>
 <author><![CDATA[kasim]]></author>
 <category><![CDATA[U-boot技术交流区]]></category>
 <pubdate><![CDATA[Sun, 08 Mar 2009 00:47:40 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[据我所知, 事实上友善之臂从来没有正式发布过mini2440的u-boot, 
光盘上&quot;OpenSourceBootloader&quot;目录下的u-boot-1.1.6-FA24x0.tar.gz源代码是友善之臂在原始的u-boot 1.1.6基础上打了网上一些开发者开发的针对S3C2440的u-boot补丁, 可以支持Mini2440开发板.
如果你需要比较新的版本的u-boot, 可以试试
1) [url=h ..]]></description>
 <link><![CDATA[http://121.40.142.80/read.php?tid=1234#3327]]></link>
 <author><![CDATA[kasim]]></author>
 <category><![CDATA[U-boot技术交流区]]></category>
 <pubdate><![CDATA[Sun, 08 Mar 2009 00:36:49 +0000]]></pubdate>
</item>
</channel></rss>