完全按照流程来做，而且能引导厂方的文件系统镜像，我想这样可以证明我自己做的内核没问题了吧？
但是我在做文件系统的时候，却莫名出现：
Freeing init memory: 128K
Kernel panic - not syncing: Attempted to kill init!
网上解决方案是在内核编译的时候加上ecc的，但是我已经加了！所以说这个错误很诡异！
我的系统：FD10
我的arm-linux：4.4.3(系统和文件系统都是一样的用这个编译)
busybox版本：busybox-1.15.2
下面是我串口打印的出错信息：
Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "boot"
0x000000200000-0x000000500000 : "kernel"
0x000000500000-0x000010000000 : "yaffs2"
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
Advanced Linux Sound Architecture Driver Version 1.0.20.
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
end_request: I/O error, dev mtdblock2, sector 256
isofs_fill_super: bread failed, dev=mtdblock2, iso_blknum=64, block=128
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 129 is bad
block 821 is bad
block 1333 is bad
block 1981 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 128K
Kernel panic - not syncing: Attempted to kill init!
[<c002e6b0>] (unwind_backtrace+0x0/0xd8) from [<c02a3f08>] (panic+0x40/0x108)
[<c02a3f08>] (panic+0x40/0x108) from [<c004bb28>] (do_exit+0x64/0x588)
[<c004bb28>] (do_exit+0x64/0x588) from [<c004c0d4>] (do_group_exit+0x88/0xbc)
[<c004c0d4>] (do_group_exit+0x88/0xbc) from [<c0054cb8>] (get_signal_to_deliver+0x2ec/0x324)
[<c0054cb8>] (get_signal_to_deliver+0x2ec/0x324) from [<c002b408>] (do_signal+0x68/0x4cc)
[<c002b408>] (do_signal+0x68/0x4cc) from [<c0028dec>] (work_pending+0x1c/0x20)
*** Warning - bad CRC or NAND, using default environment
为了网友做对比，下面是成功时候的信息，就是我自己编译的内核挂上厂方的文件系统.bin时的信息：Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "boot"
0x000000200000-0x000000500000 : "kernel"
0x000000500000-0x000010000000 : "yaffs2"
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
Advanced Linux Sound Architecture Driver Version 1.0.20.
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
end_request: I/O error, dev mtdblock2, sector 256
isofs_fill_super: bread failed, dev=mtdblock2, iso_blknum=64, block=128
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 129 is bad
block 821 is bad
block 1333 is bad
block 1981 is bad
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 128K
hwclock: settimeofday: Invalid argument
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFHWADDR: No such device
ifconfig: SIOCSIFADDR: No such device
route: SIOCADDRT: Network is unreachable
open device leds: No such file or directory
[01/Jan/1970:00:00:10 +0000] boa: server version Boa/0.94.13
[01/Jan/1970:00:00:10 +0000] boa: server built Jul 29 2009 at 14:27:34.
[01/Jan/1970:00:00:10 +0000] boa: starting server pid=926, port 80
