[ Superboot on Tiny210 - Board type check? ]

In Superboot
"Board type: 1" and "Board type: 2" What is the difference ?
How do you decide boardtype in superboot ?

---------------------------------------------
Board type: 2(or 1)   <==== how do you decide
NAND Low-level formating...
NAND Low-level formatted...

Superboot-210
Ver: 1.3(20120319)
CPU: S5PV210 1GHz
RAM: 512MB
NAND: 256MB(SLC) ID:ECDA1095

...

---------------------------------------------

Mini210: 1
Mini21S//Tiny210: 2

Thank you very much !!!!

How do you select [Boardtype:2] in FriendlyARM.ini ?

In FriendlyARM.ini file

How do you manually select board-type:2 ?

Please.


booting error ( in my tiny210 board)
------------------------------

( SD booting, Nand copy )

Board type: 1
NAND Low-level formating...
NAND Low-level formatted...

Superboot-210
Ver: 1.3(20120319)
CPU: S5PV210 1GHz
RAM: 512MB
NAND: 256MB(SLC) ID:ECDA1095
Touch Device: no 1-wire
LCD Type: S70(Manu)

Installing OS 'ANDROID'
Installing bootloader...
file: /images/Superboot210.bin: 528 KB(540672 Byte)
Installing bootloader succeed
Installing kernel...
file: /images/Android2.3.1/zImage: 3 MB(4091904 Byte)
Installing kernel succeed
Installing yaffs2-image...
file: /images/Android2.3.1/rootfs_android.img: 122 MB(128295552 Byte)
Installing yaffs2-image succeed
OS 'ANDROID' Installed

rebooting.... (  Nand booting )

Board type: 1    ( <== ㅠ.ㅠ  Board type : 2 )
Load Kernel...
Uncompressing Linux... done, booting the kernel.  ( <== stop !!!! )

原理图第5页，硬件 版本识别，估计就在这里。tiny 210焊的是R22，R21，R18。
如果自己开发硬件想用superboot，硬件最好把这点加上。最好自己搞一套uboot，毕竟superboot不开源。
对于底层的东西，友善还是保留的很多，对于完全自主开发的朋友，并不是很合适。不过人家也说明白了，不适合初学者。

非常感谢。