Linux................................................................................................................. done, booting the kernel.
Linux version 2.6.29.1 (root@yao) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #20 Mon Jan 11 14:26:47 CST 2010
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: SMDK2440
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0
irq: clearing subpending status 00000003
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61152KB available (3244K code, 309K data, 140K init)
Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 716 bytes
NET: Registered protocol family 16
kobject (c035bf7c): tried to init an initialized object, something is seriously wrong.
[<c0297b9c>] (dump_stack+0x0/0x14) from [<c014eda8>] (kobject_init+0x40/0x78)
[<c014ed68>] (kobject_init+0x0/0x78) from [<c0195170>] (device_initialize+0x28/0x94)
r5:c00281f0 r4:c035bf38
[<c0195148>] (device_initialize+0x0/0x94) from [<c0198d9c>] (platform_device_register+0x18/0x24)
r4:c035bf30
[<c0198d84>] (platform_device_register+0x0/0x24) from [<c0199010>] (platform_add_devices+0x24/0x68)
r4:00000000
[<c0198fec>] (platform_add_devices+0x0/0x68) from [<c0012b20>] (smdk_machine_init+0xa0/0xbc)
r7:00000000 r6:00000000 r5:00000000 r4:c00278d0
[<c0012a80>] (smdk_machine_init+0x0/0xbc) from [<c00113ac>] (smdk2440_machine_init+0x30/0x38)
[<c001137c>] (smdk2440_machine_init+0x0/0x38) from [<c000e838>] (customize_machine+0x20/0x2c)
r4:c0023d48
[<c000e818>] (customize_machine+0x0/0x2c) from [<c002b2d0>] (__exception_text_end+0x60/0x198)
[<c002b270>] (__exception_text_end+0x0/0x198) from [<c0008598>] (kernel_init+0x80/0xec)
[<c0008518>] (kernel_init+0x0/0xec) from [<c004ec7c>] (do_exit+0x0/0x66c)
r4:00000000
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x30/0x44()
sysfs: duplicate filename 's3c2440-nand' can not be created
Modules linked in:
[<c0297b9c>] (dump_stack+0x0/0x14) from [<c004bd88>] (warn_slowpath+0x6c/0x88)
[<c004bd1c>] (warn_slowpath+0x0/0x88) from [<c00d9d04>] (sysfs_add_one+0x30/0x44)
r3:c3850380 r2:c0311a88
r7:c380d2a0 r6:c035bf7c r5:c38526c0 r4:ffffffef
[<c00d9cd4>] (sysfs_add_one+0x0/0x44) from [<c00da2dc>] (create_dir+0x58/0xa8)
r5:c38526c0 r4:c3817df8
[<c00da284>] (create_dir+0x0/0xa8) from [<c00da36c>] (sysfs_create_dir+0x40/0x5c)
r8:c0369654 r7:c035bfa0 r6:c0369654 r5:00000000 r4:c035bf7c
[<c00da32c>] (sysfs_create_dir+0x0/0x5c) from [<c014f0d4>] (kobject_add_internal+0xc0/0x194)
r4:c035bf7c
[<c014f014>] (kobject_add_internal+0x0/0x194) from [<c014f284>] (kobject_add_varg+0x40/0x50)
r8:c035bfa0 r7:c035bfa0 r6:c0369654 r5:00000000 r4:c035bf7c
[<c014f244>] (kobject_add_varg+0x0/0x50) from [<c014f330>] (kobject_add+0x58/0x64)
r6:c035bf30 r5:c035bf38 r4:0000001c
[<c014f2d8>] (kobject_add+0x0/0x64) from [<c0195564>] (device_add+0x78/0x4e0)
r3:c035bfa0 r2:c032dd78
[<c01954ec>] (device_add+0x0/0x4e0) from [<c0198d30>] (platform_device_add+0xf8/0x14c)
[<c0198c38>] (platform_device_add+0x0/0x14c) from [<c0198da4>] (platform_device_register+0x20/0x24)
r7:00000005 r6:00000000 r5:c00281f0 r4:c035bf30
[<c0198d84>] (platform_device_register+0x0/0x24) from [<c0199010>] (platform_add_devices+0x24/0x68)
r4:00000000
[<c0198fec>] (platform_add_devices+0x0/0x68) from [<c0012b20>] (smdk_machine_init+0xa0/0xbc)
r7:00000000 r6:00000000 r5:00000000 r4:c00278d0
[<c0012a80>] (smdk_machine_init+0x0/0xbc) from [<c00113ac>] (smdk2440_machine_init+0x30/0x38)
[<c001137c>] (smdk2440_machine_init+0x0/0x38) from [<c000e838>] (customize_machine+0x20/0x2c)
r4:c0023d48
[<c000e818>] (customize_machine+0x0/0x2c) from [<c002b2d0>] (__exception_text_end+0x60/0x198)
[<c002b270>] (__exception_text_end+0x0/0x198) from [<c0008598>] (kernel_init+0x80/0xec)
[<c0008518>] (kernel_init+0x0/0xec) from [<c004ec7c>] (do_exit+0x0/0x66c)
r4:00000000
---[ end trace 1b75b31a2719ed1c ]---
kobject_add_internal failed for s3c2440-nand with -EEXIST, don't try to register things with the same name in the same directory.
[<c0297b9c>] (dump_stack+0x0/0x14) from [<c014f160>] (kobject_add_internal+0x14c/0x194)
[<c014f014>] (kobject_add_internal+0x0/0x194) from [<c014f284>] (kobject_add_varg+0x40/0x50)
r8:c035bfa0 r7:c035bfa0 r6:c0369654 r5:00000000 r4:c035bf7c
[<c014f244>] (kobject_add_varg+0x0/0x50) from [<c014f330>] (kobject_add+0x58/0x64)
r6:c035bf30 r5:c035bf38 r4:0000001c
[<c014f2d8>] (kobject_add+0x0/0x64) from [<c0195564>] (device_add+0x78/0x4e0)
r3:c035bfa0 r2:c032dd78
[<c01954ec>] (device_add+0x0/0x4e0) from [<c0198d30>] (platform_device_add+0xf8/0x14c)
[<c0198c38>] (platform_device_add+0x0/0x14c) from [<c0198da4>] (platform_device_register+0x20/0x24)
r7:00000005 r6:00000000 r5:c00281f0 r4:c035bf30
[<c0198d84>] (platform_device_register+0x0/0x24) from [<c0199010>] (platform_add_devices+0x24/0x68)
r4:00000000
[<c0198fec>] (platform_add_devices+0x0/0x68) from [<c0012b20>] (smdk_machine_init+0xa0/0xbc)
r7:00000000 r6:00000000 r5:00000000 r4:c00278d0
[<c0012a80>] (smdk_machine_init+0x0/0xbc) from [<c00113ac>] (smdk2440_machine_init+0x30/0x38)
[<c001137c>] (smdk2440_machine_init+0x0/0x38) from [<c000e838>] (customize_machine+0x20/0x2c)
r4:c0023d48
[<c000e818>] (customize_machine+0x0/0x2c) from [<c002b2d0>] (__exception_text_end+0x60/0x198)
[<c002b270>] (__exception_text_end+0x0/0x198) from [<c0008598>] (kernel_init+0x80/0xec)
[<c0008518>] (kernel_init+0x0/0xec) from [<c004ec7c>] (do_exit+0x0/0x66c)
r4:00000000
S3C2410 Power Management, (c) 2004 Simtec Electronics
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (extended precision)
JFFS2 version 2.2. (NAND) (SUMMARY) 漏 2001-2006 Red Hat, Inc.
msgmni has been set to 119
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Console: switching to colour frame buffer device 30x40
fb0: s3c2410fb frame buffer device
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
brd: module loaded
loop: module loaded
dm9000 Ethernet Driver, V1.31
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "mtdblock2" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
哪位有在linux移植的时候 出现过这样的问题，请指点小弟。谢谢
