在安装了vmware通常会，网络连接中一般会自动生成VMware Network Adapter VMnet1和VMware Network Adapter VMnet2的，就是和本地连接在一起的，
A：这时你可以启动vmware->选择虚拟机（M）->设置（s)->Hardware->Ethenet->Host-only(即是和主机共享一个么有网络）
B：然后把VMware Network Adapter VMnet1和VMware Network Adapter VMnet2都设置为自动获取ip地址（方法是分别双击VMware Network Adapter VMnet1和VMware Network Adapter VMnet2选中常规>属性>常规>此连接使用下列项目>双击Internet 协议（TCP/IP）>自动获得IP地址和自动获得DNS服务地址（B）
C：启动虚拟机中的终端分别输入如下命令
$:service network restart
$:ifconfig
[root@localhost linux-2.6.32.2]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:D7:B6:3A
inet addr:192.168.232.129 Bcast:192.168.232.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fed7:b63a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1486945 errors:12 dropped:0 overruns:0 frame:0
TX packets:1216246 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:849575066 (810.2 MiB) TX bytes:302648769 (288.6 MiB)
Interrupt:18 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:332 errors:0 dropped:0 overruns:0 frame:0
TX packets:332 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19631 (19.1 KiB) TX bytes:19631 (19.1 KiB)
这是你可以在etho 中看到有inet addr:192.168.232.129 Bcast:192.168.232.255 Mask:255.255.255.0这一项，其中这个192.168.232.129 （与对我的机子来说的，你的可能不一定是我个哦） 就是你的fedora的ip了 ，这时你就可以在dos Ping了
C:\Documents and Settings\Administrator.0030700BBD0343C>ping 192.168.232.129
Pinging 192.168.232.129 with 32 bytes of data:
Reply from 192.168.232.129: bytes=32 time=19ms TTL=64
Reply from 192.168.232.129: bytes=32 time<1ms TTL=64
Reply from 192.168.232.129: bytes=32 time<1ms TTL=64
Reply from 192.168.232.129: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.232.129:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 19ms, Average = 4ms
如上所求如果lost=0，就说明你的虚拟机可以和外部电脑连上了。
